A few answers to frequently asked questions :) The charging port is on the top cover, forgot to show it. The batteries last for about half an hour of driving. The maximum weight of a trailer or machine is approximately 500 kg / 1100 lbs.

I enjoy watching your new build slowly come together, but one thing I appreciate the most is seeing you use what you made in a past video, to help complete the new build. It confirms that they weren't simply gimmicks that were thrown together to make a video for subs/$ like some channels do. *Well done* as always.

For anyone curious how to mig weld. There is usually a datasheet sticker with settings related to volts and wire feed speed. Just know the size of wire and check it out on the sticker. More expensive machines will guarantee this sticker is included. As far as gas flow it should be set to 20 cfh (cubic feet per hour) or 10 Lpm (liters per minute). If there is wind set 10 cfh higher or 5 Lpm adjustments. Er70s-6 is standard wire

I am not a machinist. I had to watch this. A craftsman doing his thing at this skill level is a thing to behold. We have several trailers at our business - gonna share this with the boss.

YOUR NEWEST FAN HAS ARRIVED SIR - 8 BILLION OF US THANK YOU FOR SHARING YOUR WISDOM!!!!

Very handy little machine and really enjoyed this build !! All custom built and amazing !! You will find nothing better for sale anywhere !!👍👍

That's ingenious! I bet he built that from scratch without any blueprints. Slightly overbuilt but anything worth building is worth over building. Well done my Polish brother. 👏👏👏👏

My dad started out his career as a machinist for Caterpillar. Watching these machines work is fascinating.

Really think splitting the shaft and putting an extra 2 bearings is the way to go, other than that seems like a really nice build! Probably will take some inspiration from it!

That's a strange seat for a scooter! 😖🤣

Love watching you put these projects together mate. Awesome 👌

Dude flat out! I have been around RV's and Boats all of my life and that could do the job of any tug I've ever seen! Nice work!!

I have no need for this type of implement. I have no welding skills or lathe equipment. I have no reason to watch this video. HOWEVER... I couldn't quit watching!!! Absolutely phenomenal!

Pure genius, my friend. It's good to have you back!

Looks like it works well for the little trailers. Where this is needed is for bigger travel trailers.

There is nothing I can say that would convey my absolute respect for anyone who is a master of their craft. Very pleasurable to watch

35 seconds in EVERYTHING I have seen so far would make my life easier.

love watching all your builds bro,once again awesome work👌🏼

Nice build! Wish I had this back in the day when I used to work with concessions trailers, made spotting them a breeze! I do like the welding clip around the 13:30 minute mark, cut that segment in backwards so the sparks flew into the weld. With some modifications this would make for an excellent aircraft tug for those weekend pilots who have the pleasure of hangering their aircraft.

THE MAN is extremely ingenious, downright fantastic!!!

Don't listen to these people... You improved your skills and gained experience, while simultaneously making an entertaining piece of content. Now you're left with a piece of equipment that outlasts a Chinese machine a hundredfold. That's a win in my book! Most people will buy crap that ends up in the landfill. Keep up the good work!

Nicely done. Great workmanship!

Another fantastic build with a practical use. I modified some electric pallet trucks to do a similar job and learned a few things. On this build, the position of the ball hitch is very close to the drive centre line. This reduces steering effort. However, if the trailer hits resistance, the unit is going to try drive out from under the trailer - potentially whipping the handle upward quite violently. But I applaud your excellent craftsmanship and creativity!

I love watching your videos. You are a brilliant and practical craftsman and inspire me on some of your projects. Thanks for sharing these videos!

You are like the Norm Abrams of metal working. Wow fantastic workmanship.

Very Cool! I love watching your builds!

Fantastic job as always ! - It would be very cool to add a charging point somewhere on the vehicle to recharge the 2 batteries without having to take the cover off and take the batteries out of the vehicle every time they go flat and need to be recharged... Keep up the great work ! 👍👍👍👍👍

Love the build. We were just talking about creating something like this and this pops up on my YT. Only thing I'll change is making it a T handle instead of straight

An outstanding build! It's refreshing to see someone with the knowledge to use tools to skillfully fabricate works of art!

The process is as good if not better than the awesome finished project!!! I have to repair my Lathe so I can do some great fabricating like you. I love that welding table!! As soon as I have some extra money I am going to purchase some steel and use my new(to me) Mag-Drill to make some holes for clamps like yours.

Very clever idea and well made video.👍 The little power drive ball hitch device is very handy for relatively light loads, but a stronger version could be made for shifting heavier loads like carevans and medium size trailers. It make me a bit jealous to see the excellent skill in combination with good tools and equipment making this project look like child's play, but we can't all be equally skilled at everything...😀 PS, for people who may not already know it: Leaving skin, and especially eyes exposed to welding arc's glare can easily suffer damaging "flash burns" to exposed skin and permanent damage to their vision - and potentially skin cancers in the future.🤐 !

For the drive motor, looks like a dump truck tarp motor. They're low speed and got some torque. I made my 40lb anchor winch for my houeboat. Slick! BTW, nice build. I was looking for some ideas for my trailer dolly. Nailed it!

Best use of old power wheelchair part I ever seen.

I've always know these types of devices to be called a "Mule", used them a lot to move heavy CNC machinery to location once delivered to shops. Nice to see a DIY version, thanks for sharing!

GARDEN ROTOVATOR with a tow ball on front FAR CHEAPER.

I love these quick 5 minute at home DIY videos.

Haven’t run a lathe in 40yrs. Looks fun great job 🇺🇸👍

The two wheels are rigidly connected to the same shaft, right? Shouldn't the shaft be split in the middle, so that each motor will drive its corresponding wheel? Because I don't see the point of having two motors, if they are not used as a differential system.

That is ABSOLUTELY genius!!! And the entire process is great to watch!!! Congrats on another successful project!!!

For a minute there, it looked like you were making the most kickass wheelchair ever.

Regardless of the device itself, which might be really usefull, it's a great pleasure to watch how you create it. Chapeau bas!

dzieki za kolejny ciekawy filmik, chetnie je ogladam. a tak na marginesie to masz fajny park maszynowy

That’s really cool. I have a muck truck to move my dump trailer around. I made my own trailer attachment but this was epic!

i'm sure there are a number of uses for this but the video at the end makes it look like he is out walking his favorite dog. amusing.

Cool table! and that plasma/compass guide thing, very cool!

I was really impressed with the skill, and the creative mind. I was let down by what you chose to move with it. Would of been cool to see it move something a little heavier than a log splitter that is easily moved by hand

Super robota. Zazdroszczę umiejętności i narzędzi :)

My Uncle made one of these 50 years ago. Although it was not motorized, it was hand cranked. It worked just as well.

This is "ABSOLUTELY GENIUS"! Have you thought of adding a couple (opposed sides) Grease fittings to Lube the Adjustable Hitch "Elevator"? This would keep this sliding feature from binding in the future. Awesome Job as always! -Thomas 🖖

Great work again bro! As always very usefull💪🏻

По исполнению вопросов нет-"на века!"😉 А вот по вложению материалов(-для тривиального перемещения дровокола по недешовому дворовому покрытию!)-масса вопросов.🤗 *Может, это "железо"-да в минитрактор?!* 🤧

I’m glad I have all this tooling equipment laying around… and material too.

Excellent project! Very smooth operation and quite intuitive! Well done!

Super 👍🏽 Perfekcja w każdym calu! Pełen profesjonalizm 💪

Hands down the most badass practical useful thing I've seen built on here. Bravo sir. You are on another level

Maybe this was just a part of his Resume, so people can see how knowledgeable he is at building "Anything" you want for Top dollar! You got to admit, he really knows what he is doing!

Parabéns grande vc é um verdadeiro profissional no seu ramo de mecânica 👏👏👏

No ciekawy projekt. Gratuluję

will you sell the plans for the basic shape? I have different motors, direct drive, no chains but I do like your design.

Just watching you spray paint gave me paint boogers.

What a great job! 😍

Fajnie zedytowany filmik, ale te dźwięki przejścia trochę rozpraszają :) Jak dla mnie bez nich lepiej by było. Zazdroszczę wyposażenia. Świetna robota!

We had 2 of them back in the 70's at the dealer I worked at. 1 with a ball mount for moving the team race boats (Hydroplanes) around and a second with a big rubber pad like a plow for pushing no-start cars around the dealership shop.

This is fantastic on every level, Thanks for having no annoying back ground music

Życzę nieskończonej kreatywności 👍👏💪

Amazing craftsmanship!!! 👌👌👌

Talk about swatting a fly with a sledge hammer!

Wow! As soon as all the tools arrive from China and I complete the training to match the skill of this craftsman, I'm going to build one just like it!

This man believes in the power of STEEL 😋

Jak zwykle genialny :)

I just use the wheel chair. Split the platform add solid non neumatic tires. To Make front stabilizers. Added 4 marine batteries and ride it around like a atv and move sit around for years with a 8 position throw switch to double voltage to go faster. .. Just use the motors to steer with a rotory wheel made from old brushless motor hall sensor. Old CD player steering by wire controller. Also hooked it to a wireless router and can WiFi control wirh my. Jail broke iphone. App I wrote Debian... never thought about makin a KZfaq video. Til now I got a zero turn string trimmer im makin from trashed hooverboars atm

Love it! I just finished one made from a 1946 Speedex walk behind tractor. I pulled the gas engine off and replaced with electric motor. I originally started with AGM batteries also but changed to two 23 ah of Litium ion, Much better but yeah, spendy. Keep up the good work

Życie polega na tym by je sobie ułatwiać, a Ty jesteś ewidentnym na to przykładem. Wszystkie Twoje wyroby to potwierdzają. Pełna profeska w tym co robisz. Brawo Ty 😎

Always a great Job 👍👍

Looks nice. Now all I need is a master machinist and a fully equipped metal shop.

I have absolutely no use for this thing, but I'm mesmerized watching him make it. His skill level is amazing. I wish I had the knowledge and the tools to do this. I work in wood. We don't have toys like this.

Is that is a solid axel, how are you turning?

That turned out Great. I’m very impressed. Big Hello from Texas.👍❤️🇺🇦

In America, a Kowalski notified me that the SKI stands for Skill, Knowledge, and Intelligence! I admire that Polish Americans are patriotic and faithful to America and to Poland. I admire that Poland stands strong for freedom of speech and freedomof religion! Clever build! Great video

Потратить месяц,чтобы перевезти газонокосилку,которая и так на колёсах...ты просто гений

moral of the story: if you have $100k+ in tools and a shop and $200k worth of knowledge, you can build something that the Chinese can duplicate for $200. 😂

Super amazing! I am looking to build one to move my travel trailer into tight spaces so I may need a larger motor setup but absolutely love this video!

Work smarter not harder !! Great job !!

cmon guys you cant just use the sound of one clip at 16:42 and loop it for a minute and expect us not to notice :D same thing at 16:15 but in reverse :D nice try but not good enough. otherwise great content as always

Excellent craftsmanship! I'd love to see what you might be able do do with the parts left over from a captured Russian tank. Ukraine seems to have a surplus of them lately 😉

Seriously? A machine to move other machines that have never required machines to move them, previously? I thought I was going to see something. However, I still think that bubblegum deserves greater credit. He's a true machinist, but the machine???

This is a great video. Furthermore, it yields a product that in a modified version, I may want to build. The one issue I see id that based on the bolts used to fix both sprockets and both hubs to one shaft (see 3:43 and 3:52), this means both wheels MUST turn at the same speed. I occasionally move a ~3000 lb trailer/ in an asphalt covered storage yard. (~400 lb tongue weight, and ~250 to 300 lb thrust, very slow speed ~1 km/hr). The asphalt and tongue weight mandate that the two drive wheels to be able to rotate and different speeds relative to one another. So, each sprocket needs to be affixed to the adjacent hub, where both are allowed to rotationally 'float' on the mainshaft. Given the slow speeds, this could be done without additional bearings.

co za pomyslowosc, brawo.

Konstrukcja, jak praktycznie zawsze, bardzo fajna. Niestety chyba brakło ścieżki dźwiękowej bo dźwięki toczenia przy nagraniu z drona nieco się powtarzają.

Hey, I just wanted to say Thank You to all you Polish people for the help you are giving the Ukrainian folks in their time of need. I love you all for that!

Clever build. Enjoyed the machine work and welding. The only reason I see for the twin gearmotors on a common drive shaft would be to double the torque available to move the trailer. This would also double the current requirement and shorten the run time. Not a criticism, just an observation. Very nice fab AND camera work. Be well.

Darek do roboty zdejmuje się obroczkę. Zwłaszcza na tokarce, a poza tym to zdejmij bo mnie kobieta denerwuje że ja nie noszę i że mam brać przykład z ciebie😁😂🤣

When you have way, way, way too much time on your hands. I just put a ball hitch on the back of my riding lawn mower. Problem solved, with virtually no effort.

I've been wanting to build this for 20yrs, never got to it. almost identical to my drawings. good to see it fabricated and demonstrated. nice job.

Well done my friend! I made one years ago using an old Troy Bilt roto tiller to move my boat. Mine failed as I didn't have the 3rd wheel. Wish I had seen this 30 years ago.

Great build love your workshop. Love your tools.

You have a natural for doing what you do you're amazing and an excellent Machinist your cuts are precise if you could train two more guys to do exactly what you do as your employees you could make hundreds of these sell them offer a pretty price that's affordable God bless keep doing what you're doing you have such an amazing talent I could imagine how good you'd be able to create a trike the kind that bikers drive on the highway I'm sure it would look amazing

Great video lathe's and car 😉👍👏👏👏

Oh man if I had all the equipment you have I could build just about anything 😉👍

Makes me want to get a lathe and a welder!