Vermeer 5410 Rebel (repair & restore) replacing Chains, Sprockets, and Bearings Part 1
Рет қаралды 2,427
10 ай бұрынFollow Rocky Oaks Farm in Lancing Tennessee as we disassemble old sprockets, chains, and bearings. A full account and run down on the Vermeer hay baler 5410 Rebel. Part 1 of a 2 part instructional video.
@user-uh9xk7bm7h 9 ай бұрын
Sometimes there’s two Allen screws stacked on each other on some Baylor there’s three bolts pull the flange off. You have to unscrew them in and screw them in the other holes to pull the sprocket off.
@user-uh9xk7bm7h 9 ай бұрын
The year of the Baylor is stamped on the front, and then have replaced bearings and sprockets on my baiters. Warren sprockets will eat a chain up. It pays to change them.
@user-uh9xk7bm7h 9 ай бұрын
If a bearing ever gets loose and walks into the flange plate, it pays to put new flange plates on and bearing
RockyOaksFarm_Lancing_TN
Рет қаралды 1,1 М.
KiKiDo
Рет қаралды 3,8 МЛН
The Scientist Hay Farmer
Рет қаралды 29 М.
Arrow JM Farm & Outdoors
Рет қаралды 601
Messick's Farm Equipment
Рет қаралды 115 М.