No video
Vertical Miter Shooting Board Build | Perfect Box Miter Joints
Рет қаралды 94,575
Күн бұрынRob Cosman shows you how to build your own vertical miter shooting board DIY. This is a great shooting board for box makers. Get perfect mitered corners.
----------
If you like our content please LIKE us, SUBSCRIBE to our KZfaq channel, and RING THE BELL to be notified whenever we release a new video.
_______
* VIDEOS ROB MENTIONS:
- 32 Seconds to sharp: • Sharpening A Plane Bla...
- How to make a table saw auxiliary fence: • How To Make A Sacrific...
* SUBSCRIBE TO ROB"S MONTHLY WOODWORKING TIPS NEWSLETTER - lp.constantcon...
* SUBSCRIBE TO ROB'S KZfaq CHANNEL TO TAKE YOUR WOODWORKING TO THE NEXT LEVEL: / robcosmancom
* POPULAR VIDEO PLAYLISTS:
- Sharpening Plane Blades and Chisels: • Sharpening Hand Plane ...
- Hand Plane Basics: • Hand Plane Basics
- Woodworking Tips and Tricks: • Woodworking Tips & Tricks
- Hand Cut Dovetails: • Dovetails by Hand
- Best of Rob Cosman Videos: • Best of Rob Cosman You...
- Tool Reviews: • Tool Reviews
- Rob Cosman Workbench: • Rob Cosman Workbench
* SUBSCRIBE TO ROB'S ONLINE WORKSHOP - robcosman.com/...
* LIVE KZfaq WORSHOPS - Every other saturday at 6:00pm Eastern Time
* QUESTIONS - Have a question about the Tools, Techniques, or Anything Else you saw in this video? Post your question in the comments section of this video!
* VISIT OUR STORE - To learn more or purchase any of the tools you saw Rob use in this video, please visit our retail store at www.robcosman.com
* LEARN ABOUT ROB'S PURPLE HEART PROJECT: robcosman.com/...
* DONATE TO THE PURPLE HEART PROJECT: robcosman.com/...
* FOLLOW US ON SOCIAL MEDIA:
FACEBOOK - / robcosman
INSTAGRAM - / robcosman_handtoolwood...
@ebrohman Жыл бұрын
What are the advantages/disadvantages of this compared to a donkey ear? With a donkey ear you can still have the regular shooting board ready in a second, although this seems like it may be more accurate?
@RobCosmanWoodworking Жыл бұрын
Two jigs designed to do the same thing. The traditional donkey ear with a screw is harder to build
@joeasher2876 7 ай бұрын
Every time I watch one of these videos it ends up with the same catch 22 problem... you already need a tool that can cut a true 45 in order to make a jig to can cut a true 45. If I had a table saw that could already mitre cut accurately then I woudn't need a mitre shooting board, but I would be able to build one.
@edwardt8194 Ай бұрын
With lots of test cuts and fitting, you don't need a tool that has 45°
@skylarkrayneski453 Жыл бұрын
Thank you for all your great content. As a 15 year old tying to get into woodworking you have tought me a lot that I can incorporate into my builds.
@Andrea-bw8xm Жыл бұрын
Good for you, kid. I wish I had started when I was your age! Pay attention to the detail. You can learn great techniques with Rob Cosman and team. Happy Holiday Season and while you're on break from school...practice your skills!
@RobCosmanWoodworking Жыл бұрын
Skylar.....Merry Christmas. Just let me know whatever woodworking questions you have and I will help you
@myerscok Жыл бұрын
Thanks Rob. Great video. I will definitely be building one of these shooting boards.
@leehaelters6182 Жыл бұрын
Welcome to the trade and craft, Skylar! Keep a strong heart! May you always be your own best admirer, and your own worst critic. Please look up the Rules as put forth by Wendell Castle, God give him good rest.
@lenpiazza8493 Жыл бұрын
As a 56 year old trying to get into woodworking you have taught me a lot that I can incorporate into my builds.
@audioman99 8 күн бұрын
Thanks Rob!
@brenchuckswood3826 Жыл бұрын
Now I’m gonna have a shop full of shooting boards. Thanks a lot Rob! Lol. Sarcasm. They will be put to good use. Chuck
@andrewbrimmer1797 Жыл бұрын
Rob for everything not just these videos but for what you do with the vets, thanks Merry Christmas and happy safe New Year
@RobCosmanWoodworking Жыл бұрын
Merry Christmas to you.
@charles888 Жыл бұрын
Very clever method of using a feeler gauge with a square to not have to rely on visible light between square and work. Thanks, Rob.
@RobCosmanWoodworking Жыл бұрын
I use feeler gauges all the time
@dlewis2446 Жыл бұрын
I'll give credit that you are one of the very few people I've seen who uses shooting boards practically. I think they're as essential as a bench. However, I was taught these are the basics. What I think will really impress your viewers is to show them how to use custom angle jigs in the boards to make compound angled boxs/trays. Example, A 70° 'square' in the mitre jig will rip the compound, a 20°fence edge tool will offset the angle and rim so it all sit nice and flush on the surface Make 2,wooden hinge them together and you have a perfect compound mitred box. You could even make a custom angled shooting boards to make any number sided fluted forms.
@smart-jn1gg Жыл бұрын
Thank you for planing MDF. I often find I can sneak up on precision by hand planing edges of plywood and mdf even after careful work with a table saw. I can always resharpen after.
@RobCosmanWoodworking Жыл бұрын
Yes you can! I never understand the people who say, “ it will dull the blade”. So does basswood
@pimzedd Жыл бұрын
I built one of these a couple of years ago. It works great. I found that if for any reason the miters do not produce a 90 degree corner, the angle can be corrected by moving the lateral adjusting leaver to make slight changes to the miter.
@RobCosmanWoodworking Жыл бұрын
great point
@jradwick2 Ай бұрын
Can't wait to make this shooting board, love how you adapt on the fly sincerely thanks
@evankooiman1988 Жыл бұрын
I built this over the weekend. Got to use it for the first time yesterday. It worked perfectly. I got exact 45° cuts. I did have to cut the 45° cut in the jig twice. I needed to refine the 45° and make it a little bit more accurate, and also I needed to make the groove a little deeper in the board.
@ruthwoods5020 6 ай бұрын
This is EXACTLY what I have been looking for. GREAT video. GREAT instruction. Thank you.
@natepeterson7145 8 ай бұрын
That's some serious accuracy. Great tutorial Rob.
@norm_olsen Жыл бұрын
This video is awesome! I love how you manage to get to perfect and flush 45 degrees on the sled using the table saw. I was wondering at first when you were assembling the parts as to why it wasn't precise. But it's clear now! Thanks for sharing! As they say, work smarter, not harder!
@RobCosmanWoodworking Жыл бұрын
Glad you liked it, Merry christmas
@mdburnem 10 ай бұрын
I always appreciate your videos, tutorials and instructions. I would dearly love to make one of these but without a good tablesaw and the various jigs I will have to keep looking. Keep up the great work.
@danthechippie4439 8 ай бұрын
Could you use a router with a 45 degree bit instead of a table saw?
@soldier4christ172 Жыл бұрын
Best thing to do on Christmas PTO... binge watch Rob Cosman in the evenings on KZfaq! Merry Christmas Rob, Luther, and the entire family!
@RobCosmanWoodworking Жыл бұрын
I totally agree
@jsmxwll Жыл бұрын
That is pretty sweet! Gives me a reason to revise mine. Thanks for the effort you put into your videos and the presentation of information.
@RobCosmanWoodworking Жыл бұрын
Thanks for watching!
@pauloreyfigueiredo Жыл бұрын
You encouraged me to move to hand tools, keep UP the good work
@danielwhiteside9180 Жыл бұрын
Thank you so much for this video, and all of your videos. I built this shooting board and it works perfectly. Thank you once again for all the content that you put online it’s greatly appreciated.
@dale1956ties Жыл бұрын
Thank you !!! I've been looking forward to this video ever since I heard you make reference to it on the live stream the other night. Also, seeing the holes in your beloved 5-1/2 reminded me that you spoke about that as well and I'm anxious for the announcement and or video regarding that.
@RobCosmanWoodworking Жыл бұрын
The holes are experiments we are doing. If it leads to a new product it will be months from now
@daviddura1172 Жыл бұрын
Merry Christmas and here's to a Happy and Prosperous New Year.....
@RobCosmanWoodworking Жыл бұрын
And to you snd yours
@rastapete100 Жыл бұрын
Great idea! I like making boxes but avoid miters because I can never get the corners perfect. Now I will only need to be perfect once- when I build the shooting board.
@RobCosmanWoodworking Жыл бұрын
Yup, be picky once and you are done
@DonsWoodies Жыл бұрын
Always wanted to make one of these for wider boards. I've made 4 regular ones for a hand tool class I teach to do 45° for picture frames but they only handle about 1-1/4" wide boards. This is the best design I've seen yet for these wider ones. Very cool and easy to make precise. Thanks for the video, Rob. Merry Christmas to you and yours.
@RobCosmanWoodworking Жыл бұрын
glad you liked it Don
@DonsWoodies Жыл бұрын
@@RobCosmanWoodworking Finally made one of these yesterday and tested it this morning. I was a little upset with some of the precision I achieved on the board (retired machinist here so I'm too picky for my own good sometimes.) However, the 45° miters it makes are perfect! Great design. Game changer.
@SGTGardner Жыл бұрын
This is great I was looking for this video after I saw the shot on instagram, thanks Rob!
@RobCosmanWoodworking Жыл бұрын
You bet
@jerrygillette854 Жыл бұрын
I have been looking for one of these to replace mine from 15 years ago, that is a little awkward to use. Great timing. Merry Christmas to you and your family. And much thanks for your PHP.
@RobCosmanWoodworking Жыл бұрын
Happy holidays! Send me a pic when you build a new one
@kentboys5017 Жыл бұрын
This is a great idea to get accurate mitered corners. The shooting board looks as technical as the mitered corners. Thanks for sharing! Happy holidays! Take care.
@RobCosmanWoodworking Жыл бұрын
Thanks for watching. Happy Holidays
@andrewbrown8148 Жыл бұрын
What a great tutorial for this jig, Rob~! I'm going to have to build one to add to my hand-tool accessory arsenal. Gotta find some of that 1" MDF too. Thanks for this video~!
@RobCosmanWoodworking Жыл бұрын
Please do! The big box stores dont carry it. Need to find a place that caters to designers and builders
@stephendonathan6782 Жыл бұрын
Thank you for sharing! Merry Christmas to you and family! Take care and GOD BLESS 🙏!
@RobCosmanWoodworking Жыл бұрын
Happy holidays to you
@bobwalker2293 Жыл бұрын
Thank you Rob
@RobCosmanWoodworking Жыл бұрын
You bet
@RICKYDENNIS49 4 ай бұрын
Yet another great video. Can you tell me what the tapered countersink drill bit you were using for the screws, its something I have not seen before. What's the advantage of those drill bits over normal priming countersink drill bits ?
@keithbrock6410 Жыл бұрын
Thanks for this video and all you do. Merry Christmas to you and your family!
@RobCosmanWoodworking Жыл бұрын
Merry Christmas to you getting ready to gain a few pounds
@williamhanna5224 5 ай бұрын
Awesome video Great work !
@davelink1318 11 ай бұрын
Awesome ! I'm going to have to build one, it seems I can't cut anything square !!! And I restored a old Firestone supreme, witch I have some work to do on it , thanks
@Jean-guy714 9 ай бұрын
Hi Rob, Thank you for the excellent video. Why don’t you make the side pieces flush with the base of the MDF? I see that you trim them to make sure they are exactly the same height on either side. Thanks
@robertdyet Жыл бұрын
Thanks Rob an Merry Christmas to you and your Team and Happy New Year
@RobCosmanWoodworking Жыл бұрын
Ho Ho Ho...Merry Christmas to you and yours
@emersonassis7154 Жыл бұрын
Wow...congratulations from Brazil...this is an amazing precise shooting board...thanks for sharing...by the way why that three holes at hand plane body? Merry Christmas and thanks a lot for gifted us with all video classes during these years and your job at Purple Heart Project...an example for everybody..God Bless You and family...
@RobCosmanWoodworking Жыл бұрын
Merry Christmas. The holes are some design experiments we are trying
@danthechippie4439 8 ай бұрын
Great looking shooting board, I could use that for base boards/trim. Could you use a 45 degree router bit on the mdf base instead of using the table saw so you wouldn't have to dial in the table saw? Obviously that cut with a router would need to be done at the beginning
@bretttyler5 Жыл бұрын
Thanks for sharing! Merry Christmas
@RobCosmanWoodworking Жыл бұрын
HO Ho Ho
@rick91443 Жыл бұрын
Always enjoy. Boy would I love a N.American Table Saw just to get to square one. Cheers and Merry Christmas...rr Normandy, Fra.
@RobCosmanWoodworking Жыл бұрын
Whats the issue with a French table saw? Where in Normandy are you?
@harleywood9588 Жыл бұрын
Merry Christmas. I’ve been wanting to make one of these, perhaps this will be the impetus
@RobCosmanWoodworking Жыл бұрын
Well glad I made it then
@joehirschegger7723 Жыл бұрын
Great timing on this video build! I was just thinking about getting a better 45 degree shooting board and here it is. So, you don't worry about back beveling for end grain to reduce tearout? Thanks Rob and crew!
@RobCosmanWoodworking Жыл бұрын
I just didn’t think about doing it the side piece of the jig….i should have done it
@michaelthompson5875 Жыл бұрын
Great project Rob, I think I may need one for my shop. Merry Christmas to you and your family, thank you for the incredible education this year.
@RobCosmanWoodworking Жыл бұрын
Merry Christmas
@J.A.Smith2397 Жыл бұрын
Made me one over a year ago, needed a way to make box corner lol
@raymondcollyear4773 Жыл бұрын
Thank you for this video sir. I enjoy making keepsake boxes for friends and family but always had trouble with getting the 45s right. I'm trying to get the hang of dove tails but not there yet,and butt joints dont look good. Wishing you and your family a Merry Christmas and wishing you joy and happiness and good health for the new year.
@RobCosmanWoodworking Жыл бұрын
Merry Christmas to you. Good luck with your boxes
@alanmckeown6462 Жыл бұрын
A very good idea. Merry Christmas
@RobCosmanWoodworking Жыл бұрын
Thank you! You too!
@murraypotts924 Жыл бұрын
Merry Christmas Rob Another great idea and another tool to make to go with the wooden hinge kit I bought off you recently. With the benefit of hindsight, may I suggest making the base a little longer to start with in leu of adding a bit latter. We all have 20/20 hindsight. To set up my table and miter saw for 45 degrees I make 4 cuts to get a box this exaggerates the error 4 times. I also ensure that the fence is parallel to the blade because that will put the 45 degrees out. Maybe another video topic tuning up a table saw to get perfect 45 degrees cuts😁. Regards Murray Australia
@RobCosmanWoodworking Жыл бұрын
All good ideas, thanks
@user-qg6fy4yp8t Жыл бұрын
Thanks!
@RobCosmanWoodworking Жыл бұрын
You bet
@ianwatters5613 Жыл бұрын
Rob love your videos and have learned a lot over few years, you take a lot of pride in your work and precision quality wood work , was just watching this one and wondering why you don’t wear a Dust mask or any respiratory protection especially when cutting MDF at the table saw 😳 we only get one set of lungs , good to look after them 😉
@RobCosmanWoodworking Жыл бұрын
Except when filming.
@robohippy Жыл бұрын
One question I have about planes used with shooting boards, do you want a plane blade that is sharpened dead on square to the sides of the blade? It seems that for general use, you want a very slight arc to prevent blade lines/ridges in the finished piece. I was thinking that with a shooting board plane you would want the cutting edge perfectly straight, even on the shooting board planes that have a skewed blade.
@MrWoody135 Жыл бұрын
Great video, as usual. Love the hair....you hippy !!
@RobCosmanWoodworking Жыл бұрын
Happy new year
@fayz44awad Жыл бұрын
Thanks
@RobCosmanWoodworking Жыл бұрын
You bet
@dpmeyer4867 Жыл бұрын
thanks
@RobCosmanWoodworking Жыл бұрын
You bet
@cj.tj.8201 Жыл бұрын
Just looking at the piece at the top that the plane rides on. If there was any chance it may sag over time. You might could invert a piece of plywood across vertically behind that piece. Somewhat like truss. To hold it up. Hope you see what I'm trying to say.... If I build one I will incorporate it into mine.
@RobCosmanWoodworking Жыл бұрын
I dont think its going to sag but hey it never hurts to beef things up
@pag345 Жыл бұрын
Are you kidding me Rob ? I just built one last week.... and built it wrong I see now haha. I did search your channel first and didn't see anything. Guess I'm building a new one 🤣
@RobCosmanWoodworking Жыл бұрын
Sorry about that. Give it another go
@chrisc4527 Жыл бұрын
Having made something that looked a lot like this, but with out the benefit of a table saw, I would have been much more interested in how Rob would have tackled it without that saw. I used a hand held circular saw to rough the long 45deg guide, and it felt like cheating. Given how many YouYube wood workers show making mitre corner boxes with just their table saws, I reckon it is those without such tools who would find this kind of shooting board most useful.
@RobCosmanWoodworking Жыл бұрын
You can make this whole thing with hand tools just have to test your angles to make sure you are dead on
@hino304 Жыл бұрын
Happy New year Rob, and thanks for the continued advice and sharing your wealth of experience. I would love to build one of these but like most Brits, I don’t have a table saw. How would you go about building one with just hand tools and a track saw?
@tintansigloXXI Жыл бұрын
This is just the video I was waiting for, thanks for sharing your ideas and knowledge.
@RobCosmanWoodworking Жыл бұрын
My pleasure! I knew you wanted it so we made it !
@Matt-nv2qg Жыл бұрын
Merry Christmas Rob, any chance you folks will be offering these for sale?
@RobCosmanWoodworking Жыл бұрын
I am considering....we will see
@jshanab42 Жыл бұрын
On your regular shooting boards you always flip the piece and do a bit of a chamfer and then work up to that, to prevent tear-out. Here it would be difficult but is it also not necessary becasue the "fence" is zero clearance because of the braking in?
@lincolndickerson1293 Жыл бұрын
😮 Just wow. The tactics you use to create things like this are incredible. I have one question, on a Cosman shooting board the back, the part the work piece is held against, is off set toward the front a few inches. Why is that not done here?
@RobCosmanWoodworking Жыл бұрын
Because on the straight shooting board there is only a tiny strip of wood the sole of the plane is held againt and that has a tendency for users whe they shoot through a piece to pull the plane into the shooting board. Pulling the fence back a few inches prevents this. On this miter board the plane is riding on two supports so its held very solidily and that same problem dies not exist
@smtitmas Жыл бұрын
great video. I use mine whenever possible and the results are definitely noticeable. However, I'm curious as to the reason for the holes on the side of your #5 1/2. some sort of accessory handle mount? or some other reason? please do tell.
@donesry2902 Жыл бұрын
Thanks Rob! Nice helpful video. You missed an opportunity to build an elevated aux fence for your table saw rather than screw on the extra piece. Do you put any CA glue into the MDF screw hole before you put the screws in? How long do you anticipate this shooting board lasting?
@RobCosmanWoodworking Жыл бұрын
I did not add any glue to the screw holes. I think it will last for years
@TomLeg Жыл бұрын
Wouldn't all this be so easy in mm!
@RobCosmanWoodworking Жыл бұрын
Go watch my video on mm vs imperial
@barry.w.christie Жыл бұрын
Another useful fixture and with the usual high precision and attention to detail 👍 Was there any benefit to cutting the 45 degree parts individually and then lining them all up, compared to just attaching them and then running it through the table saw and cutting the 45 all at the one time?
@RobCosmanWoodworking Жыл бұрын
Well thats the way I would approach it if I
@RobCosmanWoodworking Жыл бұрын
I did not have a table saw
@mayberrywj Жыл бұрын
Great video....thanks....:)
@RobCosmanWoodworking Жыл бұрын
Ok
@RobCosmanWoodworking Жыл бұрын
Thanks for watching . Merry Christmas
@michaeljasper2225 Жыл бұрын
thanks for making the left handed comment...
@RobCosmanWoodworking Жыл бұрын
You bet
@Rossco242424 2 ай бұрын
Are you ever going to turn this into a product for sale?
@ibrhemahmed170 5 ай бұрын
😊😊😊😊
@bluecollarbanter8971 Жыл бұрын
Rob, I am having some tear out/spelching on the backside of the the fence after the plane iron passes the work. Any ideas on best way around this? It's mostly just annoying, but was wondering as I never hear the sound from your planes/videos that mine makes when using it and getting that tear out. Thanks!
@jimmccoy3438 Жыл бұрын
Hi Rob, Great video. Not having a table saw, I am trying to figure out how to make one of these. Any suggestions?
@RobCosmanWoodworking Жыл бұрын
USe a hand plane to cut the 45 degrees and measure it with a good combination square
@leehaelters6182 Жыл бұрын
Rob, can you tell us a little about that monster engineer's square that you have? Is it a Starrett? So many the times I wished for something that size that I could rely on.
@RobCosmanWoodworking Жыл бұрын
I bought it on Kijiji, which is a Canadian version of craigslist up here in an auction. It came from the rust belt in Ontario, which is basically our previous manufacturing area so no I can’t tell you exactly what it was used for in this day, but it was designed for testing flatness.
@djsteviet8014 Жыл бұрын
Thanks for a great video Rob! I built something similar but it's a little small, and a bit clunky, so a great opportunity to upgrade. My only question would be how would you create the v channel if you don't have a table saw. I can think of a couple of possible ways but would love to have your thoughts. Merry Christmas and thanks for a great year of videos and information.
@RobCosmanWoodworking Жыл бұрын
I would hand cut two opposing 45 degree pieces and glue them against each other
@ccdaddyo6984 Жыл бұрын
Big fan Rob! Where to find this mythical 1" MDF in Michigan? Love the Rip saw and dowel kit I purchased from you too.
@RobCosmanWoodworking Жыл бұрын
You have to look around . You will not find it at the big box stores. Look for the wood suppliers that cater to custom builders.
@rogerprice4504 Жыл бұрын
Not sure I need one of these, but almost worth building it just for the fun of it. One obstacle is that I don’t have a table saw so I’m thinking through how I would use a plunge saw and rail set up. Has anyone used that setup to try and build this project?
@RobCosmanWoodworking Жыл бұрын
Not that I am aware of but you can certainly build this with just hand tools
@squirtlegiles4452 Жыл бұрын
Hi Rob, I'm going to make one of these. Thankyou. I just made a batch of mitred boxes from purple heart and my drop saw struggled to cut true because of the hardness. I already cut the top and bottom groves on the router table prior to cutting the mitres. Would you route the groves after shooting the mitres? Thanks, Ash from South Australia.
@RobCosmanWoodworking Жыл бұрын
I typically route the grooves after cutting the dovetails out but you can do it either way
@TrueMune Жыл бұрын
Would there be more plane stability with the piece at the 45° angle? Keeping the plane flat on its side. (I'm only 3 minutes in, so... this could have been discussed already)
@RobCosmanWoodworking Жыл бұрын
What you are thinking about is called a donkey ear and that is another way to achieve the same thing. BUt no there is not a stability issue of one over the other
@user-nx3zk5qi8t 4 ай бұрын
Do you ever make any of these for sale?
@RobCosmanWoodworking 4 ай бұрын
Working on it
@MrAtfenn Жыл бұрын
hi rob and co. im getting ready to build this shooting board as well (i have already built the others you demonstrated) . In this build is there any problem with the blade impacting the jig itself? thanks and as always love the channel, love PHP
@benjamincrossman5937 Жыл бұрын
I have an almost identical jig, and the only impact I've had is accidentally having the blade too far advanced and taking a bit of wood off the end stop. Not a big deal though, doesn't affect performance except maybe making the chances of blowing out the end of your workpiece a bit higher, but you can stop that with a simple knife line. The iron will take a slice or two out of the rails that guide it, but I just make sure to use a plane of the same width consistently ( a 6 or 7) rather than a 4 or three that might ride on the ramp where the slice was taken before by the wider plane. Hope that makes sense!
@markoaaltonenHH Жыл бұрын
Great👍 What are those holes on the side of Wood River?
@RobCosmanWoodworking Жыл бұрын
Experiment on the plane we are doing
@frankdesantis452 Жыл бұрын
Merry Christmas Rob. Is there any need for a back bevel on a 45 miter, similar to what you do when shooting a 90 degree piece? I'm getting some tearout on my small box miters and have been trying to use a chisel to ease the back edge, with only limited success.
@RobCosmanWoodworking Жыл бұрын
In this particular design there is a fence against the edge of the piece preventing blow out so no not needed, but its all about the shooting board design not the angle
@rb7738 Жыл бұрын
What are the holes on the side of your woodriver 5¹/2 hand plane for?
@RobCosmanWoodworking Жыл бұрын
We are doing some design expeiments
@elboincc Жыл бұрын
I want to make one but my Incra fence will not allow the 45 cut from both sides. Any ideas for an alternate method? Maybe with a track saw?
@RobCosmanWoodworking Жыл бұрын
In that case I would cut all angles super precise the first time then just line them up using your finger to feel if everything is lined up (Your finger can detect very small amounts)
@elboincc Жыл бұрын
@@RobCosmanWoodworking I wasn’t clear on my question. I was asking for an alternate way to make the “V” cuts that will serve as the cradle for the hand plane since I cannot make the cuts with my TS but still want to build the jig. Maybe a v-Groove router bit or possibly construct a sled?
@roydaley3413 Жыл бұрын
👍
@RobCosmanWoodworking Жыл бұрын
👍
@rwe2156 Жыл бұрын
What are the holes in the sides of your planes for?
@RobCosmanWoodworking Жыл бұрын
Some experiments we are doing
@KAYAKN Жыл бұрын
Will the board be available for purchase?
@RobCosmanWoodworking Жыл бұрын
We are considering it
@dennisdoi8572 4 ай бұрын
Does it matter what kind of plane to use for your shooting board? What kind do you prefer to use?
@RobCosmanWoodworking 4 ай бұрын
Length from blade to toe and weight are the two biggest factors. Blade width increases capacity through not a big deal. I use the 5 1/2
@oldtimer3385 Жыл бұрын
Look good,but people who don’t have a table saw how do you build this
@RobCosmanWoodworking Жыл бұрын
You could build this by hand. Just get everything correctly sized up and test before glueing and screwing
@nhoj4539 Жыл бұрын
how can I buy one . ?
@RobCosmanWoodworking Жыл бұрын
We are considering if we should add them to our stote
@RobCosmanWoodworking Жыл бұрын
Here is a Merry Christmas Build Video for you. If you like shooting boards check out my Shooting Boards playlist here: kzfaq.info/sun/PLqUOljnY0d9fw2gCf5bXc7nqEQMX7O2NY
@danielrosenthal9625 Жыл бұрын
Great video again, thank you. And I love your punk rock aproach to dust collection. All the best
@mitchstephen5491 Жыл бұрын
Merry Christmas to you and all your family and have some fun with all your grand children. From Haliburton Ontario
@michaelbruunskovkristensen2509 8 ай бұрын
Precise… HA…. This shooting board is only precise everytime the Moon is at the same distance from the Earth!
@cabman86 Жыл бұрын
I will never understand making something and calling it 3/4" and then it's 1/16 thinner. It ruins any and all plans you have. And try to find router bits those sizes.
@RobCosmanWoodworking Жыл бұрын
For baltic birch its made in Europe so its really made to 25 mm, 3/4 is the closets to it but not exactly 3/4
@josephkerkau2520 Жыл бұрын
That tables saw looks pretty close to your hands!! Therefore it's Unsafe!!
@RobCosmanWoodworking Жыл бұрын
Not at all. Safe or unsafe is all about having ot not having the wood under control
@rollingstone3017 Жыл бұрын
Can't be done with hand tools, I guess. I only wish this channel was less oriented to power tools. Can't afford and don't have space for a tablesaw. And benchtop tablesaws are junk.
@RobCosmanWoodworking Жыл бұрын
The beauty of KZfaq, you can find what you want.
@dicksutliff6353 Жыл бұрын
If you add short (1/2 in) legs to fit into a pair of bench dog holes, you won’t have to mess with a clamp to keep jigs like this in place.
@ashleys2075 Жыл бұрын
Great video thanks. Hey Rob you should check out rjsshedshop, the guy practically pays tribute to you for teaching him how to dovetail. Merry Christmas 🎅
@RobCosmanWoodworking Жыл бұрын
Just went to rjshedshop. I will drop him a note. Thanks
@kpnc2001 Жыл бұрын
After seeing this on InstaGram, I was really looking forward to seeing how you made this. Cannot wait to make my own. Thanks for posting this! Merry Christmas and Happy New Year to you and your Family!
@RobCosmanWoodworking Жыл бұрын
Send us a picture when you make yours and we will post to our customer project page
3x3Custom - Tamar
Рет қаралды 325 М.
Rex Krueger
Рет қаралды 338 М.