Vertical Sliding Storage Shelves

No video

Vertical Sliding Storage Shelves | Maximized Storage

Рет қаралды 387,149

Ай бұрын

Sliding Storage shelves that maximize your space. These have 75 cubic feet of storage in a 2' x 5' base plus you have 100% access to every inch so you'll never lose things in the back of your cabinet ever again.
*Project Plans*
Vertical Sliding Storage Shelves Plans
www.bearmounta...
3D Print Shelf Hole Jig File
www.bearmounta...
3D Print Hardware Container Trays: Fit 6 across one shelf
www.bearmounta...
*Products Used*
Hardware
Heavy Duty L Bracket:
amzn.to/3zKGNgn
6" Heavy Duty Flat Bracket
amzn.to/3Y0Kit1
Channel Trolley Rollers:
amzn.to/4cCnTa8
Trolley Stoppers:
amzn.to/4cHSfbk
Channel Hanger Brackets:
amzn.to/3LnLBe1
Strut Channel:
amzn.to/3y055T1
Shelf Pegs:
amzn.to/3Lopog3
10" Door Handles:
amzn.to/3WlM1rI
Low Friction Tape
amzn.to/3SfcWTB
Tools
DEWALT pilot point drill bits:
amzn.to/3zOTbvE
Dado Blade:
amzn.to/3WhOFi9
DEWALT 18ga Brad Nailer:
amzn.to/3Vh1d8Q
Tabletop Band Saw:
amzn.to/3UZVdA2
DEWALT impact driver & hammer drill:
amzn.to/49SAvbc
DEWALT bit set:
amzn.to/3g7ddHT
Laser Level:
amzn.to/3zGVAJ0
ForgedAir FA95 Respirator+Visor (Use Code Bear15 to save 15%)
forgedair.co/p...
*Filming Equipment*
www.bearmounta...
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.
Thank you for supporting Bear Mountain Builds and allowing me to continue to bring you valuable content.
*Bear Mountain Builds Things*
Instagram: / bearmountainbuilds
Facebook: / bear-mountai. .
Bear Mountain Builds: www.bearmounta...
Patreon: patreon.com/BearMountainBuilds

Пікірлер: 417

@MrIdiotkiwi Ай бұрын

Having used Unistrut/equivalents for years in my day job, I love when it gets used for home stuff. With the strut, we typically run a file over the cut ends to remove burrs, then hit it with some spray galv. You can get a couple different types to roughly match matt vs shiny galv on the strut. Also, if framing timber is ridiculously expensive, the entire frame can be made out of strut too.

@jeremyspecce 3 күн бұрын

You can also get plastic end caps

@montemorast7867 20 күн бұрын

I purchased the plans and his description as "detailed" is spot on. Twenty three pages color and countless measurements. Excellent list of "needed" supplies with links to get many of the items. One of the best plan sets i have obtained in some time.

@NickBair316 Ай бұрын

I'd like to see more of the jigs and stuff you've created. Especially anything 3d printed.

@brettoberry3586 Ай бұрын

A good reason to go and get more stuff! 😉Fantastic solution for us "over 50" guys who have way too much stuff, not enough storage and need a reason to go to the hardware store.

@bruce-le-smith 28 күн бұрын

there is a video called Every Grunt from Home Improvement if you need to play it in the car on the way to the hardware store

@dozer69643 Ай бұрын

I'm new here and went right to your store... man what a guy for setting your prices the way they are. That helps the mind say yes I can do that. Hats off to you sir

@scottmcmurry3823 Ай бұрын

I'd absolutely like to see more on the jigs you've created; including your process (software, design, etc). Sweet project btw! Now I am thinking about changing my plan from building vertical cabinets to these. 2x cabinets takes up comparable space, but this is just cool. Also, blew my mind with the laser for the nails. WHY HAVENT I THOUGHT OF THAT!?! FREAKING DUH.

@johndoe6032 29 күн бұрын

Great Idea. I imagine that in most for a lot of people they won't even need the top frame because their garage ceiling isn't more than 8' and they could just lag bolt the channels directly into their ceiling joists. .

@matt-tate 25 күн бұрын

Good point! I might be doing this 😁 Although I don't look forward to putting rawl bolts in my concrete garage roof slab...

@clintoncvl 29 күн бұрын

One day I will have a workshop worth this level of effort. Thanks bro. King.

@JonesCoWoodworks 7 күн бұрын

Harbor Freight has a set of Brad point drill bits that are made for wood and for less than twenty bucks a set you can’t beat them. They have a very sharp point on them that will allow you to start drilling holes exactly where your mark is without any runoff.

@frederickmichaud6783 Ай бұрын

This makes me want to tear down the shelving I’ve put in my garage. I’m both happy and a bit upset.. great build idea!

@wlewis1840 Ай бұрын

I was thinking the same thing before I saw this comment

@KMvrtr Ай бұрын

I’d build a storage platform on top if there’s space above in your shop. Also protects those protruding rails a bit more. And strip of light because the platform might make it a bit more dark. Overall: What a great use of space! This looks both great and very practical.

@ericankney5957 17 күн бұрын

Even if there isnt 'storage space' above, still might be helpful to add a top skin just to keep 'things' from getting up in there. Might also be good to put a very thin sheet between the 'drawers' so things cant shift around in there and get stuck.

@bobware1087 Ай бұрын

What a wonderful design Zack. For the last couple of days I've been redesigning my shop/ garage (co-shared with my car) to become more efficient and lo-and-behold your video popped up on my subscription list. Your well thought out design appears, with a slight height adjustment , to be a perfect replacement for the inefficient shelves that now occupy precious space. Love your videos, keep up the good work.

@SarcasmoRex Ай бұрын

I didn't realize that there was storage on both sides. That's awesome!

@ELCADAROSA 10 сағат бұрын

Very nice!!! I'm fitting out a barn for storage of woodworking tools and boating supplies and storage, and this design will really come in handy!

@BenNawrath Ай бұрын

Great build! Love me some unistrut. Two things: I think you can get taller profile unistrut which means you can skip the hanging brackets (unless that's easier!), and you could use peg board instead of 1/4" ply on the ends if you somehow still had more junk to store!!

@BearMountainBuilds Ай бұрын

Great Ideas! This is my first time using unistrut in a build. I didn't know there are options out there. Might have to look into those next time. I didn't think of the peg board either that would be a great cheap option as well!

@kendybar Ай бұрын

@@BearMountainBuilds a while back I started to go down the rabbit-hole of the Unistrutverse. There is real plethora of accessories and fittings, things like feet and post bases to trolleys and elbows. If you start to look thru a catalog, you'll find yourself stuck in the unistrutverse, just imagining the endless possibilities of new projects and ideas. Be warned lol. Unistrut is the definition of modular customization. I guess you could say I also love me some unistrut 😆

@BenNawrath 29 күн бұрын

@@BearMountainBuilds yeah if you’re tucking the cabinet in a specific space the peg board wouldn’t add anything… the plywood looks nice and clean. But hey customizing is good!!

@thomasweber1397 Ай бұрын

I love the design. Will come back to your plans when I can finally build my own workshop. Keep up The great work 👏👏👍

@shaynesabala Ай бұрын

Wow! This is badass. What a great design. I’m in the middle of setting up my shop in my two car garage after a tree took it out and ready to maximize space and set it up nicely. I was going to build the standard cabinet but after seeing this I’m all in. Thanks for the video, very creative stuff.

@mavrik9475 Ай бұрын

im ordering this to use in my kitchen as a pantry

@guyelluzzi2705 28 күн бұрын

I agree this would make a great pantry, and could be scaled bigger or smaller to fit the space.

@abel6846 Ай бұрын

NOW, these look great. Might have to customize it a bit for my shop, but base is cool. NOW, l’m gonna finish watching.

@johntharp3478 Ай бұрын

NOW that's something I can agree with. NOW back to the video.

@alexferreira5360 26 күн бұрын

My mate took a shot each time he said NOW! He died

@bretthewitt3890 23 сағат бұрын

That's a hell of a build!! Its strong and very, very useful!! Great for my workspace also because I have a low ceiling. Great work!!

@huntermark1160 Ай бұрын

we have a wine store in our area that utilizes the same system for customer pickup orders! Great way to store lots, with a little footprint.

@joewhitney4097 5 күн бұрын

Great build, lots of storage. Thanks for sharing.

@andrewbrown8148 3 күн бұрын

This is a great looking storage solution that would work great in my garage~!! So much gear in such a compact space. I'll probably be picking up this plan from your website. Great job~!! I too would like to see content about 3D printed projects~! Thanks much~!

@jeffmastin 27 күн бұрын

I’ve made similar storage solutions of various types but I never tried to support from top. I support from bottom on rollers, and guide at the top. The biggest was in a 20’ storage container with shelves that rolled together/apart to form passage, resting on steel ‘v’ rollers on angle iron. Very smooth

@robnhannon Ай бұрын

Every time he says “rocksolid” put a dollar in a jar. By the end of the video you can buy the materials.

@captain34ca 6 күн бұрын

take a drink every time he says "now" and you'll need rehab

@jeremyspecce 3 күн бұрын

Most KZfaqrs are guilty of that for the phrase “Go Ahead” / “went ahead” I counted over 50 in ONE video once😂

@connorlund3295 Ай бұрын

This is awesome! I need more BMB content! Sleek and Easy design. Makes me excited for my home projects!

@grimmsheldon Ай бұрын

The simplicity of this for its practicality must be the best storage I've seen. I'm still building out my small shop space and this is the perfect solution. I'm curious if the top could support enough weight to also serve as additional shelving for larger, less needed items in tubs.

@BearMountainBuilds Ай бұрын

Definitely could be used as a shelf if you mount some plywood to the top frame.

@boydstongrove 19 күн бұрын

Great design. I've used these tracks for lighting in a church, but the application is genius. Thanks

@victorianosaldi5894 Ай бұрын

Yes @ 14:32-went to the site. That pin set is good its compact for on the site work.

@KennethD8557 Ай бұрын

Just watched this video.... I am sold on this idea... I dig it!

@PlayscBricks 29 күн бұрын

Great build. The plans are reasonably priced as well. Currently building my small shop and will be ordering these plans when I am ready. Thanks for the video and effort.

@joseignaciorodriguezsamped3895 13 күн бұрын

This video has been a greatest surprises has ever see. I need some stuff like this in my embrodery room. I have a very little workshop in my house, but i don't have the skills, tools, space and budget for this. I'm so sad😢. Well job and hugs from Spain.

@maxlarsson91 25 күн бұрын

Good solution for effortless opening and closing. If you have a level floor, wheels on the bottom of the shelfs would almost result in the same functionality. As you would not want guides on the floor extending past the shelf depth, you need to guide them back when moved out fully, however, you would save the effort of building the frame.

@ken-ed5by Ай бұрын

Great vision and execution!!! Small fortune in wood and hardware……..

@BearMountainBuilds Ай бұрын

But much cheaper than buying something similar

@elw4428 24 күн бұрын

I was really blown away by this at first. I love the idea, but after thinking it through, why hang the rails in a garage? It seems it'd be easier and cost less to make a cabinet like carcass and put the pull out shelves on fixed casters. Could use a miter slot and to make sure it goes in and out smoothly and can't tip over. Use a cross piece recessed at the bottom as a stop for the caster wheel. Only weight limit would be the caster capacity. This idea would be awesome if you have uneven floors or something but I can't see the benefit in hanging vs rolling on quality casters in a normal garage. Really appreciate your work and inspiring me.

@jeremyspecce 3 күн бұрын

You answered your own question. Uneven floors, stuff on the floors, etc. The unistrut and trolleys are definitely more expensive, so if you have a nice clean, level, smooth surface, then wheels would definitely be a more economical option.

@am2dan Ай бұрын

I've seen glued 2x4s break apart at the glue seam way too easily. Good that you don't scrimp on the screws. Nice build, got me thinking.

@BearMountainBuilds Ай бұрын

Overkill is how I like to build

@tomsteuverkb8dxn132 Ай бұрын

I want to try this but probably six wide with angle supports at each end, add a shelf on the top for more storage, and install hangers on each side.

@passionenamorada8188 28 күн бұрын

Hola Hola acabo de descubrir tu canal y ya me suscribí. Me encantó tu trabajo, tan prolijo y como te quedó de maravilla. Me fascina tu taller porque se ve muy iluminado, ordenado, limpio y todo ubicado en su lugar. No entiendo nada de lo que dices (jajajaja) pero si entiendo todo lo que haces. Muchas Gracias por tomarte el tiempo de enseñarnos tu trabajo. FELICITACIONES. Te envío un abrazo desde Lima Perú.

@BearMountainBuilds 24 күн бұрын

I'm glad you enjoyed my video!

@davewhite16 5 күн бұрын

Very cool idea! Also love the 3d printed designs. I bet if you had a ceiling, the cantruss could be mounted to the rafters - like in a basement shop.

@ChrisHornberger Ай бұрын

Yes. Jigs are always cool to see (and often buy) when others solve problems I've come up against. Do it!

@FinallyMe78 Ай бұрын

Genius! One of the best storage solutions. And, you did an amazing job of making them.

@tomhorsley6566 27 күн бұрын

Alton Brown had a pantry in his "Good Eats" set organized like this. I've always said I'd do it the next time I'm willing to accept the pain of home renovation :-).

@scottramos7949 28 күн бұрын

When I first saw the thumbnail and title of this video, I thought "How is this any more storage than a cabinet?". But, after watching the whole video, I am thinking that perhaps I'll pull out some of my cabinets and replace them with these pullouts. I still need cabinets for larger items, but these could store a lot of my smaller stuff. The biggest feature is not having to take stuff out of the front of a cabinet to get to the stuff in the back. The other design I've seen is where instead of pulling out, the shelves can slide to the side to make an isle between the shelves. I like your construction technique too.

@tommy8716 29 күн бұрын

This definitely gives me ideas for my weirdly deep pantry. How does it do with side to side wobble, since it's only being supported on one point at the top? Like if I were to do this for something with regular use like a pantry, should I add two wheels that extend out to the edges to give it stability as it slides? I also think making the track system blend in with the house could be tricky, but I'm sure something could be done about that

@poconojoe90 23 күн бұрын

Right up my alley… just subscribed. The video for this project is perfect and still leaves room for imagination of other (non-screw fasteners) joinery methods. Jointer, planer, Dominos, half laps, dowels….etc. Well done!!

@robking9857 4 күн бұрын

Pretty damn impressive! This is worth it just to organize my hardware. Thanks so much!

@JpOtto 20 күн бұрын

I love this and would like to build it for my one car garage shop as space is very limited. But I just want to thank you for the absolutely great price on your plans. Being in South Africa, paying in Dollars is a bit of an issue as 1 Dollar is about 20 Rand. So thank you for making it so affordable even for us. 👍 Keep on the great work man.

@druzicka2010 28 күн бұрын

Great idea. It would have been perfect in my previous house. 😊 good work.👍

@benghuattan3097 14 күн бұрын

You make wood working look so easy😊

@robtathome 29 күн бұрын

Never noticed the subscribe button highlighted when you mention it before - nice touch! maybe youtube added it...

@retiefgregorovich810 Ай бұрын

Weird optical illusion. The shelves look much deeper than the side of the storage compartment.

@Sly_Wolf_1 Ай бұрын

Yes exactly, initially I thought great but I can't sink mine in the wall. 😂

@BearMountainBuilds Ай бұрын

Had to use a wider angle lens to capture the whole thing but it does add a slight curve to the image

@querty292 29 күн бұрын

That’s fake. Behind the wooden wall he has a whole warehouse with minions managing the shelves everytime he pulls them out

@LT-gj3rm 29 күн бұрын

Great idea for the Shop or Pantry.. Just bought it.

@vitorfox 28 күн бұрын

That is amazing! I need something similar in my "garage shop"!

@ADAM-jy9jz 4 минут бұрын

the best storage ever👍

@charlesfe Ай бұрын

I really like this design - I'm building something similar to hold 3D printer filament (all regular size boxes). My pull outs use two drawer slides on one side, so only one side is open, and the weight is handled not by hanging but by two inline fixed direction casters.

@keithnsearle7393 27 күн бұрын

I have done similar to yours, but, a little different, where I have bought shelves and put wheels on them so that I can just pull the shelves out. I just have to make sure that I have the heavy stuff on the bottom shelving so that they do not fall over while pulling them out.

@gerardmurrin6897 Ай бұрын

Great job be back for the plans for sure, just getting ideas for shop organization got a new being built

@Dinglederry 12 күн бұрын

Nice build. I believe I would hide the overhead rails as well. Maybe enclose them with only slots for trolleys and some lighting installed in the enclosure.

@alexreid4131 Ай бұрын

This is fantastic. I have been working on a similar design for a totally different function that being to store my firewood on racks. I love this design though and may try it in my shop. Thanks buddy.

@douglasturner1064 26 күн бұрын

Thanks! I purchased the plans. I’m looking forward to this build and getting my small shop organized.

@zifnabalias5062 Ай бұрын

I like the part where you put a lot of thought and engineering into the side frames, overlapping 2Xs and created lap joints. then held up the entire top section (the part that holds all the weight) with 12 lag bolts, no half laps on the tops or reinforcement.

@brendancurtin679 Ай бұрын

Yeah, that was disappointing. But otherwise I love the design. In my case, I’m not sure I’d need the top section. I’d think I could just bolt those metal rails into the floor joists above me (there’s living space above my garage, so the joists can take the load… it’s not just rafters holding up a ceiling).

@kinggh0st316 Ай бұрын

@@brendancurtin679I was thinking the same thing, I'm just curious can we put a load like that on the rafters? It's a fair amount of weight

@BearMountainBuilds Ай бұрын

I thought about doing the half laps but decided the two lag screws would be enough strength for the build. Usually, if I ever have to depend on the shear strength of hardware in my builds I use lag screws and I haven't had any issues

@aaragon6866 25 күн бұрын

Like this concept. . . thanks. BTW you should shoot your brad nails perpendicular to the plywood below (16:11) to prevent nails from blowing out the side

@Boondockbuilds 6 күн бұрын

I just built a bunch of cabinets in my new shop (check out the video) and wish I saw this first. This is an awesome build.

@atmoejo_woodworking 3 күн бұрын

Wow cool, thank you very inspiring,greetings from Indonesia 😁

@davidwilliams1060 Ай бұрын

I bought your plans. They’re a work of art and look like they’ll be easy to use. Thanks.

@WynneClayton 27 күн бұрын

How do you buy the plans and HOW MUCH did you pay? (From WHERE exactly, I still haven't figured that out yet.)

@iwtkyfr 25 күн бұрын

hi! are the plans only in the imperial system or are there metric values in there as well?

@xBlertZx 16 күн бұрын

I love the build design of this and want to put it in my garage. The concrete foundation sticks out from the corners that would prevent it to be flush against the wall.

@BearMountainBuilds 10 күн бұрын

You could do some 2x4 spacers between the frame and the wall to get away from the foundation

@catprog 20 күн бұрын

Brought the plans and they are well worth it. Looking at the cost of wood however. I am thinking if I do buils it, I will use ikea billy bookcases as the shelves.

@martincaruana6632 Ай бұрын

What a great build. Off to the lumber store!

@gilbertb19 19 күн бұрын

Keep doing what's you are doing. I love your ideas and builds. By all means, share any and all jig ideas. Just bought your plans for the sliding 2 X 5 storage genius.

@williammaxwell1919 28 күн бұрын

To reduce the possibility of the wood spliting, offset the screws along the grain rather than in a line along the grain

@coachpengreen8701 22 күн бұрын

I love your storage concept. I am thinking about how to incorporate it into my garage storage area.

@wallacesheckells7095 29 күн бұрын

New subscriber! Awesome project. Gives me a wide variety of uses in different applications.

@FreeKiLLuminati Ай бұрын

I like this storage so much

@SinaArsani 2 сағат бұрын

I prefer to use wheels at the bottom with tracks for guide rail at the top. Hanging heavy cabinets for long period of time wear the mechanism and suddenly you will find the cabinets sagging and hitting the bottom part.

@soloriojpg8661 Ай бұрын

Great idea and video! Just picked up the plans and looking forward to building it!

@ryt2carry Ай бұрын

Great video and thank you for pricing the plans like you have. I think they’re a tremendous value.

@jimrosson6702 Ай бұрын

What an amazing build getting ready to move but definitely going to get your plans and build a set of these in my new place. Thanks for sharing.

@alanhedrick4517 Ай бұрын

Heck of a Build Brother. Totally love it. Will be seeing one of these in a shop near me very soon. Thanks for the plans. Ordered a few and for a few FREE!! We like Free!!! Thanks.

@WynneClayton 27 күн бұрын

Hey, I'M new to this. Where do I get the FREE plans (how do I down load them) HELP PLEASE....

@alanhedrick4517 26 күн бұрын

Not free but very reasonably priced.

@tommyweeks8289 Ай бұрын

Really great design and storage solution! Awesome video as usual.

@mondavou9408 27 күн бұрын

One for the garage and one for the pantry

@TheKingofPants 24 күн бұрын

Pantry was my first thought

@davech07 Ай бұрын

Really nice idea! I'll definitely be using your plans

@CisnerosShop Ай бұрын

If only you can Trade Mark “Rock solid”. Nice build

@rajrooplal7595 Ай бұрын

What a great idea and space saver. I love it

@inspiringbuilds Ай бұрын

Great build and space saving design. 👍

@AngieWilliamsDesigns Ай бұрын

This is a great option for storage.

@lourias 20 күн бұрын

I was skeptical of the overhead rollers. However, the additional metal strips are an excellent way to support the weight.

@davidharnett5640 20 күн бұрын

Great design and top idea but why not install channels on floor before securing to wall?🇦🇺

@lourias 20 күн бұрын

@davidharnett5640 I am going to speculate that having the channels on the floor will: 1. Bind up, getting stuck. The bearings might not be strong enough. 2. The wheels and bearings will get dirty. The opening of the channel will allow dust, dirt, and greasy grime into the channel, resulting in premature failure of the wheels and bearings. 3. I was expecting channels similar to drawer slides when this started. However, if the wheels are of proper quality and strength, the overhead will last longer solely because of minimal dust accumulations. 4. The extra strip of metal that was bolted in line with the wheel on the top provided the extra support needed to suspend the weight by spreading the clamping forces out, not just one attachment point. I hope my points clarified what might have been confusing.

@davidharnett5640 19 күн бұрын

@@lourias think you missed my point. Happy with overhead channels but don’t you think it would be simpler to install them while frame is on the floor rather than working overhead to install them? David

@lourias 19 күн бұрын

@@davidharnett5640 I apologize.