Troubleshooting C3 Corvette No Start Issues

No video

Troubleshooting C3 Corvette No Start Issues

Рет қаралды 21,198

Күн бұрын

Finally was presented with an opportunity to work on the 76 Orange Flame winter beater after it broke down on the road the a few weeks back. Watch as I give a basic description of the HEI ignition system, demonstrate how to locate the source of failure, and change the components out to get it back to running condition.
#c3corvette #corvettehowto #vettesource
To see more of the 1976 Orange Flame Corvette -
• Working on the 1976 Co...
To see more of my Corvette How To Videos -
• VetteSource - Corvette...

Пікірлер: 52

@scottmaldonado6540 Жыл бұрын

I have an 81 Corvette with starting issues. I couldn’t figure it out until I saw your video that tort me And Made it so simple. Keep making these great videos. Thanks.

@VetteSource Жыл бұрын

Hey Scott, glad to be of help. I'll keep plugging away it with more videos for sure👍

@kenlaursen6435 Жыл бұрын

A guy after my own heart! I had a 1968 Oldsmobile Toronado in high school, wish I never sold it.

@VetteSource Жыл бұрын

Hey Ken, they're definitely unique cars with a timeless design.

@Stingrayflame 6 ай бұрын

I have a 76 identical in every way to that car. Bought it 24 years ago and still love it. About 10 years ago I got carried away and dropped a 500HP 388 stroker with a solid roller in it with a PTC Built TH350 manual valve body with a 3,800 converter out to a drag vette 6 link set up with a Tom’s rear end and it’s a lot more fun than the stock L-48. Lol

@VetteSource 5 ай бұрын

Yea, I'll bet that chews up the road. Definitely an easy way to get into more trouble than you would with the L48.

@theinze069 11 ай бұрын

Thank you for the video. It helped verify i was doing everything right. I have a 78 with the hei. New coil,cap,rotor,module and 12v going in. Still no spark. 😮

@VetteSource 11 ай бұрын

Glad it was helpful. You could have a failure of the internal distributor harness or housing itself. I'm about to do a follow-up video for this car, since that's exactly what happened to it.

@Anthony-qj7qe 3 жыл бұрын

Awesome as usual, Beautiful Vette, nice to see you taking care of her..... A lil history and tour of this car would be nice. 👍

@VetteSource 3 жыл бұрын

Thanks Anthony👍. I should have time in the next few weeks to put something together.

@russellboyd5262 3 жыл бұрын

keep those c3 videos coming,I own a torch red 1977 vette,They remind me of the curves on a beautiful woman for sure,They are sick.thankyoum russ boyd.THE CORVETTE KID.

@VetteSource 3 жыл бұрын

No problem Russel, glad to do it. Will have more C3 videos out soon👍

@73xlh 3 жыл бұрын

I need that car in my life. I have 2 vettes now but, WOW! I really like that car

@VetteSource 3 жыл бұрын

Hey Larry. This Corvette is definitely one of those "dog whistle" type cars. Even with its worn in appearance it draws stares and comments every time I take it out. It has a great background story to it. When I get some time l'll have to make a video about its history.

@73xlh 3 жыл бұрын

@@VetteSource sounds great!!

@jayhockley8841 3 жыл бұрын

Nice Video ! Brings back memories of the old GM modules that went dead . Sometimes you got a warning it was gonna die ? sometimes not .. I even had a bad Condenser once ( small cylinder connected to Module ) I used to hit the contact points with some 220 sandpaper before re-installing to clean off rust and help them fire better . Shooting WD40 on them doesnt hurt and Will also help get a car started( that got wet ,) running again .

@VetteSource 3 жыл бұрын

Yep, all very good tricks that work really well. After I shot this video I went to set the base timing and discovered it wouldn't idle with the vacuum advance connected. After reinspecting I realized the ignition module wiring was cracked and brittle, so I just elected to buy a new distributor for now rather than spend the time rebuilding this one.

@maxkoth5261 Ай бұрын

I have an 81 Corvette with a new battery. Has been starting no problem all summer until last week. No electric. Had battery on trickle charger and displayed battery as fully charged. Went to turn ignition and even in accessory mode there's no power of any kind. No dome light, footwell light radio, nada. Not sure where the issue is but wish me luck

@VetteSource 11 күн бұрын

Hey Max, sorry for the late reply. I'm hoping you got it figured out by now, but my first thought would be to start with a closer look at the ignition switch attached to the steering column attached to the dash.

@aaronloritts3937 2 жыл бұрын

great job!

@VetteSource 2 жыл бұрын

Thanks Aaron, appreciate the feedback👍.

@kevinjackson2244 6 ай бұрын

just a FYI camshaft spins 1/2 as fast as the crankshaft not 2x as fast

@VetteSource 6 ай бұрын

Yep, thanks for the clarification. After I made the video, I realized I had the gear size backwards in my head and misspoke. Growing old sucks😁.

@sonnystovall5836 2 жыл бұрын

Good info , really helpful 👍.How do you test voltage coming from battery? Thanks

@VetteSource 2 жыл бұрын

Hey Sonny, glad to help. You can use an inexpensive multimeter to check for 12 volts at the BATT connector with the ignition key in the "on" position.

@ossielgarcia91 7 ай бұрын

What if I don't have 12v what I can check after that? That's my issue

@VetteSource 7 ай бұрын

Did you get anything figured out?

@200horsepower Жыл бұрын

My 79 corvette give me hart time to start after seat for a week,then works dine all day but coul be the carburetor? I want to start ,alot smoke before that happens, like is alot of fuel in the cilinder

@VetteSource Жыл бұрын

That is possible. Sounds like you may be flooding on initial startup. The new fuel with ethanol tends to ruin carburetor gaskets. Definitely worth taking a look inside the carburetor to see what's going on.

@codyj9049 3 жыл бұрын

is there an extra red 18 or 20 ga. coming out of the harness back there ? im putting together my c3 distributor and noticed a smaller red wire with a black plastic clip. already have the wiper ground connected and the two that plug into the distributor. do you know where the smaller red wire goes?

@VetteSource 3 жыл бұрын

You know what, I'm can't quite remember. I'll take a look tomorrow and get back to you👍

@ievatolkaciovaite454 3 жыл бұрын

Did you find anything about that red wire with the black connector

@ossielgarcia91 7 ай бұрын

What's the next thing to check if there ain't no 12v at the red wire? Please answer

@VetteSource 7 ай бұрын

That power comes from the ignition switch, and will only have 12V if the key is in the "on" or "run" position. I would start there. Let me know how it turns out👍.

@SLINGING_MUD_SINCE1994 2 жыл бұрын

Great video I always gotta start mine with starter fluid is there a reason for that ?

@VetteSource 2 жыл бұрын

Halal, it could be something as simple as a weak fuel pump or restriction in the fuel filter or line. One thing to watch out for with ethanol is that it's very destructive to traditional carburetor gaskets, so I would also check those as well.

@SLINGING_MUD_SINCE1994 2 жыл бұрын

@@VetteSource thanks a lot I’ll keep that in mind I appreciate it

@VetteSource 2 жыл бұрын

No problem👍

@jly4517 3 жыл бұрын

and exactly how did you forget that the screws holding the coil in the cap had to be removed? that's what you get for working on all that new technology....

@VetteSource 3 жыл бұрын

That's for sure, although at this point I'm not sure if 20+ year old cars can be considered new technology anymore😁. Thanks for watching👍

@williamburch6082 2 жыл бұрын

where did you get your parts?

@VetteSource 2 жыл бұрын

I believe I bought the module at Autozone and the cap/rotor/plug wires from rockauto.

@williamburch6082 2 жыл бұрын

Thank you! By the way your "winter Beater" is awesome!

@VetteSource 2 жыл бұрын

No problem👍. I am rather fond of it😁.

@gs3504 3 жыл бұрын

Just me or did those distributor springs look different??

@VetteSource 3 жыл бұрын

They may have been, but I ended up focusing on the internal corrosion and the overall wear I noticed in the distributor. After finishing the video, I made the decision to replace the entire assembly when it still didn't want to idle correctly. I'll probably detail the replacement in another video. Thanks for the comments👍.

@littellg1 2 жыл бұрын

theres a click sound by the fuel tank

@VetteSource 2 жыл бұрын

Click? Not sure I heard that. Which part of the video did you hear it in?

@kiesha104 2 жыл бұрын

Bud, hate to point it out to ya but you rushed your repair. There is a coil screw under the cap that is not tightened.... But at least ya didn't spend alot of money having a mechanic do it for ya......

@VetteSource 2 жыл бұрын

Yep, I'm aware, this isn't my first rodeo. I had no intention of re-using the old distributor once I saw how deteriorated the original distributor harness was. Since I was in the middle of making the video, I buttoned everything back up and then replaced it with a new distributor afterwards.