Vevor Crankcase Splitter And Crank Fitting Tool

Рет қаралды 9,476

5 ай бұрын

Vevor Crankcase splitter and crank install tool set s.vevor.com/bfQRcM Code for Promotion: Use VVPROMO to get 5% OFF
In this video I tackle this Yamaha TZR 125 engine to split the crankcase and reinstall the crank using this Vevor Crankcase tool. It would have been impossible to do this job without this tool and saves from doing any damage to the engine. Check it out.
Join me here at kzfaq.info...
The music in my videos is from www.epidemicsound.com/referra...
Stuff I use
The Powder Coating equipment is from Electrostatic Magic and they have kindly supplied me with a discount code for anyone wanting to buy a system from them. Just visit their website www.electrostaticmagic.co.uk/ and when you purchase, Just include the discount code - RetroRestore1 and you will get a 5% discount for all their products.
When customers enter the code when buying a system, they also get free shipping by entering the additional code FREESYSTEMSHIPPING Thus you need to enter both codes separately before making payment.
“As an Amazon Associate I earn from qualifying purchases.”
Sealey Go through socket set amzn.to/3tZtwsC
Respirator Mask amzn.to/3p3MKKs
Clarke King Pro Vac amzn.to/2WDoeT4
Sealey CP1202KIT 12V Ratchet Wrench Kit 3/8 amzn.to/3dgdXa0
Cyclone Dust Separation Collector amzn.to/2S8guKA
Media blasting cabinet amzn.to/2ADpv3c
Dremmel tool amzn.to/2Rcnfuh
Clarke Mig Welder amzn.to/2QwTgrx
A Good quality Makita battery drill amzn.to/2QKcfPy
Power supply for diesel heater amzn.to/3CSR4pq
5kw diesel heater amzn.to/3QQ3nsc
My Camera Equipment
Gopro Hero 10 Black amzn.to/3Gp1nkE
Gopro 10 Media Mod Cradle (The 9 fits the 10) amzn.to/3q9SRQY
Rode Wireless Go Microphone kit amzn.to/37Et48E
My DJI dual wireless mic set up amzn.to/3iH9qTG
Camera light amzn.to/3ncnLGp
Studio lights amzn.to/2TGzDza
Music
Intro Martin Butler www.totallyroyaltyfreemusic.co.uk
Brushes - www.obsidiandawn.com
Main Tracks Credited to Epidemic Sound (www.epidemicsound.com)
/ retrohax
Twitter at / martinbutleruk
email inquiries: retrorestoreuk@gmail.com
PRIVACY POLICY and FULL DISCLOSURE:
Retrorestore is a participant in the Amazon Services LLC Associates Program (UK)
DISCLAIMER: The product links in this video description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission if you purchase. This helps with my channel and allows me to continue to make videos. Thank you for your support.
Retrorestore
MMXXII
All Rights Reserved

Пікірлер: 87

@retrorestore 5 ай бұрын

For your information, the crank is not bent, Its just the threads at the end which shouldn't affect anything. If it does, we'll replace it.

@andym6608 5 ай бұрын

Hi matin I was going to say it looks bent but at the end of the vid it looks straight

@markaddy53 5 ай бұрын

i im not sayin the crank is bent if its tight when u install it and tighten screws up its usually cause the crank isant cebtralise a few taps on either end ov the crank with a copperhammer will sort it cheers mark

@paulfloyd228 5 ай бұрын

Thanks for the video Martin nice to see you back in action! thanks for the discount code too! Regards Paul

@chrisross-smith4358 5 ай бұрын

Great bit of kit, Martin, amazing how the correct tool makes a difficult job so easy. Excellent

@chrisfrob 5 ай бұрын

Mighty fine piece of kit Martin, especially the crankshaft refitting part of the tool. Just goes to show how easy a job can become given the right tools. Great work, an excellent video and explanation. Thanks for sharing.

@vijayantgovender2045 5 ай бұрын

Once one Martin enjoy watching your repair videos watching from South Africa

@Phantom0309 5 ай бұрын

crank is bent like a banana @8:14

@retrorestore 5 ай бұрын

Its just the end bit where the threads are

@Phantom0309 5 ай бұрын

well spotted Martin @@retrorestore

@stephencatterson9320 5 ай бұрын

Well done Martin great tool for the job 👏 👍

@davestatham812 5 ай бұрын

Cracking bit of kit, job well done Martin, 👍🏻❤

@BrewabitRick 5 ай бұрын

Great job really looking forward to seeing the TZR running brings back some great memories for me a great bike 👍

@STTC 5 ай бұрын

An absolute joy to watch Martin

@retrorestore 5 ай бұрын

Cheers Steve.

@tonymccarthy9273 5 ай бұрын

excellent tool Martin, and a very good repair and video,

@billywhizz98 5 ай бұрын

Nicely done Martin that’s a bit of handy kit

@alandykes2519 5 ай бұрын

Excellent job Martin Gary can get on and start building it now 👍👍👍👍

@derbyjohn972 5 ай бұрын

Glad to see you back in the cabin mate 👍🏻 so glad your health is on the mend Martin 👍🏻

@terryatkinson3182 5 ай бұрын

Always good to get new tools. Today I rebuilt a petrol power washer i got for nothing, hadn't worked in years. Had some help from KZfaq 😊 Think I'd be too tight to buy this tool and would make something to do the job from bits I'm hoarding.....

@vespamorelli7090 5 ай бұрын

Never watched a video of yours yet Martin and not picked up a good tip or useful tool to have ! Definitely going to buy one of these ! Thanks for that 👏🏻👏🏻

@retrorestore 5 ай бұрын

Thanks Tom👍

@davidtsekiri-pp7yz 5 ай бұрын

brilliant work 😊

@darrenharman3362 5 ай бұрын

Great video Martin. I know next to zero about repairing things like this, but that tool reminded me of a tool I've used many times repairing my push bikes over the years. A crank shaft extraction tool. As you'll know it's the same principal, pushing two pieces of metal apart using a screw. A real pain in the arse if you haven't got one, easy peasy when you have.

@longshanks4833 5 ай бұрын

Nice to see you back working on bikes again.

@matejakova 4 ай бұрын

Another great video

@AliMackMechanical 5 ай бұрын

Used something like this when I did a KTM very handy tool 🔧 Martin.

@lnwolf41 5 ай бұрын

A handy tool for engine mechanics.

@steven907 5 ай бұрын

Nice 1 Martin 👍👌

@Jim-ie6uf 5 ай бұрын

About time you got back out in the log cabin!😁

@petefroud5308 5 ай бұрын

Mend it man needs one .

@markaddy53 5 ай бұрын

good job lad if you hit the crank on each end with a copper hammer it centralises the crank and spins freely u wouldant have had to split the cases done many ov these engines always worked 4 me keep up the good work

@philfrim2002 5 ай бұрын

Hope you can help, love your videos, been going back over them trying to find what you used for transfer tape, in one video, my daughter what a go a making labels, thanks Philip

@skaterguy52 5 ай бұрын

The top of the crank looks like its bent martin

@retrorestore 5 ай бұрын

Its just the end bit where the threads are

@4418CARLOU 5 ай бұрын

I noticed that also.

@Evermoregreen23451 5 ай бұрын

It’s wobbling all over the place

@retrorestore 5 ай бұрын

@@Evermoregreen23451 Its all back together and no wobble at all, it was just the threads.

@handyjim 5 ай бұрын

good job

@AJPsWorkshop 5 ай бұрын

That tool makes it look a lot easier jobs a good un

@Pete.Ty1 5 ай бұрын

👍👍👍.Thank you

@philipbrownlow 5 ай бұрын

Dam you Martin ya make me want to get a 2 stroke again, I had RD 500 , engine didn’t last long 😂😢

@haydenuk02 5 ай бұрын

Great work and good tool to have. Is the end of the crank bent? Or is that just my eyes playing tricks on me 😂. Cheers for the video Martin take care and hope you’re feeling better.

@retrorestore 5 ай бұрын

Its just the end bit where the threads are

@haydenuk02 5 ай бұрын

@@retrorestore oh okay ha just though I’d mention it in case you missed it 😃

@DanDavies741 5 ай бұрын

Is there any work on the Trotter van coming soon?

@jakebutterworth1902 5 ай бұрын

when you first split the casing i think i see the spring from the output shaft seal i think!

@callumthomas653 5 ай бұрын

races not sat central in bearing tap either side sits them perfect every time Martin

@retrorestore 5 ай бұрын

I've fitted many bearings Callum.

@callumthomas653 5 ай бұрын

I believe you mate many wouldn’t

@judilpt 5 ай бұрын

When will you be doing the promised review on the power bank please Martin?

@retrorestore 5 ай бұрын

very soon.

@jamiemurphy3404 5 ай бұрын

The threads on the end of the crank are bent when the flywheel spins that will create a big vibration and may affect the timing

@retrorestore 5 ай бұрын

Its just the end bit where the threads are slightly bent. if its a problem, we'll get another crank.

@DiecastPowderCoating 5 ай бұрын

Hi Martin I hope that you are now fully recovered. That is an excellent tool, do you think it could be used on a small Mobylette type engine? Take care, Jeff

@terryatkinson3182 5 ай бұрын

Would be suitable for all as far as I can see. Splash out😂

@retrorestore 5 ай бұрын

Yes, absolutely

@theworldisflat. 5 ай бұрын

That crank pin is bent and rusty,bottom end will be in similar shape,that crank needs rebuild,otherwise you will use your case splitter again very soon.

@retrorestore 5 ай бұрын

Its just the end bit where the threads are.

@ShadowzGSD 5 ай бұрын

crank called bent bob.

@retrorestore 5 ай бұрын

Its just the end bit where the threads are

@user-hq7yo9yg2f 5 ай бұрын

When are you gonna restore lee van camps blinds

@youngcarreviews5949 Ай бұрын

I have same issue with a sp50 engine, what was making it stiff to turn?

@retrorestore Ай бұрын

They supplied a wrong size bearing.

@takis12345 5 ай бұрын

👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@anthonyg620 3 ай бұрын

Jesus that crank is well bent

@retrorestore 3 ай бұрын

It's just the thredded bit and not the actual crank.

@davesandall4530 5 ай бұрын

If you find an RD400 or a KH350 that need doing up ill buy them off you 🎉

@napper1496 4 ай бұрын

Crank was probably hitting the balancer

@garrynutter860 5 ай бұрын

What did you drop on floor at 09:00 ?

@retrorestore 5 ай бұрын

tissue.

@joekerr6685 5 ай бұрын

@@retrorestorebless you

@roadsterblue9031 5 ай бұрын

Crank bent

@retrorestore 5 ай бұрын

Its just the end bit where the threads are

@jamiemurphy3404 5 ай бұрын

That crank is bent Martin

@retrorestore 5 ай бұрын

Its just the end bit where the threads are slightly bent. if its a problem, we'll get another crank.

@northernscum8228 5 ай бұрын

Is it just me or does the nose of that crank look bent when it rotates?

@retrorestore 5 ай бұрын

Its just the end bit where the threads are slightly bent. if its a problem, we'll get another crank.

@northernscum8228 5 ай бұрын

nice to see you looking well mate after your setback..great channel this is.

@garyevans9509 5 ай бұрын

Must have been a bearing pissed as you never realigned the crank webs which is what I thought you was going to do

@retrorestore 5 ай бұрын

No it wasn't.

@garyevans9509 5 ай бұрын

@@retrorestore ???????

@cbrider726 5 ай бұрын

The crank is bent and i didnt like the way that you just put it back together . Not at all good mate .

@retrorestore 5 ай бұрын

Its just the end bit where the threads are. What didn't you like?

@JPLamoureuxsTravels 5 ай бұрын

Very interesting buddy! 😮 can’t beat having a tinker in your workshop eh! Was thinking about gettin an old scooter 🛵 to muck around with 😊

@retrorestore 5 ай бұрын

Gotta have a project JP lol

@JPLamoureuxsTravels 5 ай бұрын

@@retrorestore 😂😜👍