Vevor MICROSCOPE - for stone setting, engraving and more! Precision jeweler's work

Рет қаралды 8,474

8 ай бұрын

VEVOR Micro Inlaid Mirror
👉US Site: s.vevor.com/bfQJwN
👉EU Site: s.vevor.com/bfQIhs
👉PL Site: s.vevor.com/bfQJxd
👉AU Site: s.vevor.com/bfQJw2
👉Make sure to use the code VEVORSALE5 for 5% off!
Added a very interesting tool to my workshop! A micro inlaid mirror by Vevor. This is a jeweller's microscope that helps with precise work, especially stone setting and engraving. Today I'll show you the unboxing of this tool and how to set it up. I'll also demonstrate how it works :) Enjoy the video!
Vevor has kindly sent me this tool to share my honest review. Links above are affiliate links, which means that at no extra cost to you, I may earn a small commission if you purchase the tool through that link. Thank you! :)
⭐️ Follow me on Instagram! 😊
/ stardustmine.art
/ artofmetalsmithing
⭐️ Want to see more? Check out these videos!
- Little tools I can't live without! • Little tools I CAN'T L...
- Jeweler's hand butane torches: • TORCH for jewelry sold...
- Unboxing new tools - essentials: • Great ESSENTIALS for j...
⭐️ Additional resources can be found on my Patreon page!
Find out more about becoming a Patron and ways to support the production of the videos: / stardustmine
⭐️ JEWELRY MAKING TUTORIALS:
UNISEX RING step by step tutorial: • HOW TO MAKE A RING - t...
BEZEL step by step tutorial: • SILVER BEZEL for caboc...
RING from start to finish: • How to make a ring - f...
GOLD FILLED RINGS tutorial: • How to make GOLD FILLE...
⭐️ LET’S CONNECT!
My website: stardustmine.art/
Instagram: / stardustmine.art
Facebook: / stardustminejewellery
Pinterest: / thestardustmine
#jewelrymaking #jewelrymakingtools #silversmithing
Sub count: 102,499

Пікірлер: 53

@TheArtOfMetalsmithing 8 ай бұрын

I added a very interesting tool to my workshop! A micro inlaid mirror by Vevor. This is a budget jeweller's microscope that helps with precise work, especially with stone setting and engraving. Today I'll show you the unboxing of this tool and how to set it up. I'll also demonstrate how it works :) Is this tool something you're interested in getting for yourself? :) If you liked this video and are interested in metalsmithing tools, then you can check out my Basic Jeweler's Tools video: - kzfaq.info/get/bejne/ntBmlqpn08muZ40.htmlsi=mJERvazgwhsICIGU

@annetums 8 ай бұрын

i am so excited that youre adding this. ive been wanting to learn more fine precision work myself and metal clay.

@Gazz_R 8 ай бұрын

That's a fantastic piece of kit! Thanks for sharing and enjoy the rest of your week.

@TheArtOfMetalsmithing 8 ай бұрын

It really is! For something priced under $400 this one really delivers. Thanks a lot for watching, have a great week too! 🙏

@flyingcheff 8 ай бұрын

Basia, I am so glad you did this video on this exact tool. I have been looking at this for over a year and have been looking for reviews. Thank you!

@TheArtOfMetalsmithing 8 ай бұрын

I only just got it, so the more in depth review is pending, but I'll share it as soon as I'm able to use this microscope for some time 😀 First impression is great though! And other reviews on KZfaq are also really good, which convinced me to give it a go. I think this is a perfect alternative to expensive microscopes 👍

@flyingcheff 8 ай бұрын

@TheArtOfMetalsmithing Thank you so much for being such a light, and a sound (quality) leader in the exploration of these new budget tools.

@ovidiuolaru2518 8 ай бұрын

Beautiful gift for Christmas! 🥳😍

@garywaggoner1953 2 ай бұрын

Very well done Basila! I enjoyed watching you unbox and put the microscope together on the bench, and learned so much. Now when im ready to purchase I have a perfect baseline to judge the others I consider! Thank you ! Again, very well done.

@robertm.695 Ай бұрын

I was just desperate. I couldn't insert the eyepieces because I didn't see the small screws. Thank you for the explanation!

@anvergult788 7 ай бұрын

Thank you for sharing this super tip! I immediately bought it too, it's great! And next week my light will come. Thank you for sharing and it's always fun to watch your videos again, you do great work!!

@TheArtOfMetalsmithing 7 ай бұрын

oh wow, I'm so happy you found this helpful! I'm learning to use my microscope, I can see a massive difference already :) I hope your will help you a lot too! Thank you for watching and for your sweet comment ❤

@olegpetelevitch4443 7 ай бұрын

Got one you will love it !

@hanfleet 8 ай бұрын

Wow. Impressive. What a great idea! You're going intergalactic! :)

@ciociazieba1632 7 ай бұрын

jestem mega ciekawa tego mikroskopu! ja dopiero powoli zaczynam i Foredom był bardzo poza moim budżetem i skusiłam sie na silnik właśnie od Vevor. póki co wszystko ładnie działa ;)

@Gojirafistful 8 ай бұрын

Hey basia . Good to see you got a microscope , found it to be a game changer. Do you recommend your jewelers bench ? Looking for one currently that is affordable but also useful

@kimauger4293 8 ай бұрын

How do you like working under a microscope vs using magnifying lenses such as an optivisor?

@Mirathehermit 8 ай бұрын

nice artblog, thanks for sharing your art journey. How do you deal with acids and fumes in your workshop?

@DB-zp9un 8 ай бұрын

My frame hits the knob for the height when rotating the scope so I've had it loosen that knob and the whole scope slide all the way to the lowest position unexpectedly. Other than that, have been REALLY happy with it for the price.

@jolielynnk 8 ай бұрын

Do you need to use a .5 Barlow lens with it?

@HabibahW 8 ай бұрын

I have a microscope I got from Amzon years back for stone setting and engraving. Recently I seen this exact one on Amazon and it comes with an engraving ball kit for 500+ bucks. This on would be a Huge ! Upgrade from mines due to the spring bracket. This just makes we want to get it even more. Thanks for sharing 😜👍🏿.

@TheArtOfMetalsmithing 8 ай бұрын

And it comes WITH an engraving ball?? Niiiice, I'd say go for it 😆 Mostly because these two tools are usually very expensive by themselves, not to mention the prices of some models at other shops (GRS ball vice would be a DREAM, but it's a top shelf product for a top shelf price). And if you're looking into getting both of these tools, then this may be a great opportunity 👍 My ball vice is also by Vevor, I bought it several years ago and it's alright!

@leahhampshire1508 3 ай бұрын

What ball vice from.vevor did you get

@Paullebbon 8 ай бұрын

It looks perfect for fine work and detailing, as my eyes are not so good anymore. But it looks as though it takes up a lot of workspace on the desk and maybe it will need a separate desk set up for finishing work. I live in Vietnam now, so I don't think I can get one, but I think I need one. ☺ Great video as always.

@wendyshaw6985 8 ай бұрын

Company is in Cambodia. Maybe you can. They were quite fast with their shipping and I am in the states.

@torstenneuer1560 8 ай бұрын

You will definitely want to also get an LED ring light for this which, unfortunately, is not within the pack.

@TheArtOfMetalsmithing 8 ай бұрын

Ohh, exactly, that's what I was thinking about! What type of light I will need, thank you so much for the suggestion 🙏 I could tell already that a regular light won't be enough and even the lamp I have right now doesn't cover all of the area. So the ring light it is then 👍

@torstenneuer1560 8 ай бұрын

@@TheArtOfMetalsmithing Just look for "LED ring light" at the usual places (for some reasons, links to suppliers get blocked in the comments). Some come with about 144 LEDs and they are mounted with 3 screws on the microscope. It might also help if the light is dimmable.

@stephencoster9532 8 ай бұрын

@@TheArtOfMetalsmithing Hiya Lady Stardust, A ring light would be perfect, LED even better; the same for your camera? Do you know if your scope will take a camera? Well done on such a great buy. Love, Steve xxx

@torstenneuer1560 8 ай бұрын

@@stephencoster9532 The Vevor is only stereo, not trinocular. So there's no extra slot for a camera on that one.

@NO-TRUCKS-GIVEN 14 күн бұрын

I bought this and got my ring light on eBay for €50

@aumi.jewels 8 ай бұрын

Ohhhhh these are great…. I am going to buy one off Amazon

@TheArtOfMetalsmithing 8 ай бұрын

If you can't find one on Amazon, you can use the link from the description box, you'll get 5% off with the code 😀

@RizziceFilms 5 ай бұрын

Thanks so much for the video. May I ask what kind of desk you're using? I love how the table extends out at lap height! Would love to setup something similar

@TheArtOfMetalsmithing 5 ай бұрын

This bench is from Durston, I like the pull out table, it's very handy 😀

@Tayyab-Raja 7 ай бұрын

Can you help me ?? Please send me the easy saw rotary clamp 😭❤️.I really need that tool

@solaymaneabdou7519 7 ай бұрын

❤

@aquarius9900 8 ай бұрын

Vevor is awesome! I own several tools I bought from them.

@tishsmiddy71 7 ай бұрын

Feel like I’m much smaller than me looking through the lens at the metal brooch ❤lol

@DrAdrianP 18 күн бұрын

Is there any way to record while you work? Meaning… connections ports or anything?

@TheArtOfMetalsmithing 8 күн бұрын

Not in this one I'm afraid

@DK-qy5lt 8 ай бұрын

WOW!!!!)))))

@wendyshaw6985 8 ай бұрын

Mine arrived. The set-up wasn’t as straight forward as you described, but eventually got there. Very fast shipping in the states. Thanks for the review.

@ronidiamond4504 3 ай бұрын

I want to have that tool.....but I can't afford it.....will you give it to me

@mixedmediaartgirl300 7 ай бұрын

I am going to blame you for my debt right now😂, and praise you for your time and experience teaching me later. Hopefully sooner than later. Why is it every time you think you "have everything" your supply list doubles? Please tell me that part stops

@TheArtOfMetalsmithing 7 ай бұрын

hahaha oh gosh, sorry! 😂 But that can't be helped, it's in the package of being a jeweler and a crafter I guess haha :) And yes- the list indeed doubles and triples as you go, because you're progressing, get more ideas and generally want to try new things and solutions :) It's completely normal and indeed can make us go broke lol

@mixedmediaartgirl300 7 ай бұрын

@@TheArtOfMetalsmithing I got my first opal ring done last night! Right towards the end I accidentally marred part of the backplate and I ended up just doing a repeating pattern of that and it looks like a beautiful engraving omg I love it so much. "Happy accidents" I have enjoyed your art, videos, website for years now and it's finally something I'm able to do. I can definitely see why you have so much joy and contentment that shines through your personality. Thank you so very much friend