Sometimes a job doesn't pan out how you want it to. & this rusty, mouldy bastard is a prime example. Look after your toys properly kiddies!
Пікірлер: 92
@ItsRezzo4 жыл бұрын
These types of replicas are my favorite to be seen worked on. Battle scarred and lots of history
@hakont.49604 жыл бұрын
You'd love to work on my G&G AK-104 then, it's so battle scarred that it basically has prosthetic limbs by now, but it's still the absolute star in my "arsenal". The stock is held on with two pieces of aluminium and 4 machine screws since I managed to break the upper stock prong. The screw mounts for the front section are long gone ao I recently drilled and tappet two holes into the side of the receiver to hold it together. Same deal with the rear sight block, drilled and tappet three holes to keep the sight rail on. It's absolutely battered but I don't have it in my heart to get rid of it, too much histroy and fond memories, it's basically like a buddy at this point, hed it for nearly a decade after all.
@dannulik4 жыл бұрын
@Johnny Dong Sand papered guns don"t look like this.
@jimwentworth-brown27534 жыл бұрын
I am that Jim: BFG Jim, IED Jim...lol Just love playing hard and thankfully the kit did me proud. however luke has seriously given it a new life: cheers bud you are a star
@nivsen59863 жыл бұрын
Looks like you just went "Imma weather this bitch" and tied her up behind your car and took a nice rally in a dirt pit.
@casinodelonge3 жыл бұрын
I'm guessing you were using it for hand to hand combat.
@austinbrantley39233 жыл бұрын
A trick : watch series at kaldrostream. Been using them for watching a lot of movies recently.
@johnnykyson29283 жыл бұрын
@Austin Brantley yup, I've been using kaldrostream for since november myself :)
@nivsen59863 жыл бұрын
@@johnnykyson2928 Awww! The bots are having a conversation!
@nickm91234 жыл бұрын
to be honest, I wouldn't paint that, it looks gorgeous, all battle scared like that
@lazyj47324 жыл бұрын
Just being dragged into the sport by my son. Came across your channel, love your approach and your attitude to the trolls. Subscribed!!!
@opairsoft81004 жыл бұрын
Dude was taking Churchill’s words about fighting on the beach’s way to seriously
@setsuna2003 жыл бұрын
That is how my gear box looked when I looked at it. It looked like this. I must have had the last of this glorious generation. It last 4 years of constant play. With a 11.1 lipo stock. Now it is getting a rebuild for the gear box. So I am proud of my 416cqb
@RA75AK4 жыл бұрын
Fuuuckin hell you're incredible mate. I can't believe you restored that thing in 6 minutes and 31 seconds. Dude must've paid you about 631 million quid to have that done though. It looks *insanely* good. Right. Quiet please everybody, I need to continue binge watching this fucking master..
@jeffr77523 жыл бұрын
LOVE the Post Apocalyptic look! One of my favorites!
@bullseye3754 жыл бұрын
Can only be one of two Jims I know of you know mate 😂😂😂😂, and they do play hard from what I remember playing at the mall with them.
@jimwentworth-brown27534 жыл бұрын
i'm not the tall Jim....you could always bet i was a sneaky bastard tho.....lol
@WhenGoatsWentBaa4 жыл бұрын
i miss that site, only ever got to play there once and it was the most fun i've ever had
@SupeS198119814 жыл бұрын
Awesome job. I love the finish on it.
@Briggsian4 жыл бұрын
Paint reminds me of the skin of a Predator. I dig it
@Bertymcbertface4 жыл бұрын
Would like to know of you have had a go with the tippmann m4 recoil?
@johnzaknich39794 жыл бұрын
That is one well used gun, we'll airsoft on the beaches, we will not surrender. Cheers for the video.
@BASHERSKINZ4 жыл бұрын
Hi, what type of tape did he use on the grips?
@michaelm28394 жыл бұрын
It's fucking amazing that the owner kept the internals upgraded and working but he forgot about the external look.
@opairsoft81004 жыл бұрын
Michael Mccreight externals don’t matter besides adding more weight or less
@wkkkkkk5454 жыл бұрын
Jim the Hardcore player :D like it!
@hamx2y4 жыл бұрын
I hope you used lots of teflon tape to get a even better airseal, also make sure to correct aoe with a thick sorbo pad
@NegativeAirsoftTech4 жыл бұрын
3 inches of rubber fixes everything
@RokysCZ4 жыл бұрын
Hey, I have a question. Im about to buy an Arcturus HK416 and upgrade it. Since they use microswitch, their gearbox is different, so u cant fit drop in mosfet and I saw u already had arcturus guns for gate warfet install, so do I have to replace wiring or just use it as plug n play?
@NegativeAirsoftTech4 жыл бұрын
I've yet to see an arcturus anything that isn't wank. Double bell for an hk416. It's a Dboys basically.
@Tinblitz4 жыл бұрын
This makes me feel so much better about the state of some of my AEGs.
@andyg2904 жыл бұрын
God level glitter rolling bud👍,looks as mean as fk
@Licmebro4 жыл бұрын
Nice!
@Brindles694 жыл бұрын
Awesome stuff! What did you use to remove the paint?
@chrisclayton21624 жыл бұрын
Cracking job 👍👌
@theMoofin Жыл бұрын
Looks like the trusty gun you'd use after the apocalypse. Really nice
@instadelfang32464 жыл бұрын
I am new to Airsoft. Age older then dirt. I just bought the the umbrella helios m4. I will not be fixing it until it breaks. I do i do up keep maintenence on it to make it last?? Or do I have to take it in?? Please help. The old noob. Sincerely Hans
@vojtamorkes66464 жыл бұрын
my god this man must rly love his gun
@mikewolloschek51074 жыл бұрын
Love the video... but how did you achieve that amount of consistency Jesus Christ thats insane
@NegativeAirsoftTech4 жыл бұрын
Practice & lube. Always lube.
@jimwentworth-brown27534 жыл бұрын
@@NegativeAirsoftTech Luke does love his lube....his boyfriend told me so....lol
@ghostwalkerairsofttech19474 жыл бұрын
That looked like so much fun !!
@jimwentworth-brown27533 жыл бұрын
Just picked this comment up...sorry bud...the tape is a black semi stretchy sports tape/decent athletic shops may have it.
@skin_wizard4 жыл бұрын
The hopup seems like it was a G&G style from their CM16 Warthog series and the other similar guns. It also looks like it might be able to be fitted with modification in a G&G F2k. And yeah, I know, no one cares
@TheRavensCaw4 жыл бұрын
YO! Is this music the music used in the Die Hard Trilogy PS1 game, the diehard 2 lightgun portion?! I KNOW IT IS!
@leemcaleese7134 жыл бұрын
good job buddy great work
@blackwidowairsoft43014 жыл бұрын
Love you're videos and I agree with a lot of what you say and do on these airsoft guns keep it up.👍
@B3cky_4 жыл бұрын
Silly question, can you get all the advantages of a mosfet with a warfet? Like does having in internal mosfet have advantages over an after market one? There is so much misinformation on the topic of airsoft.
@NegativeAirsoftTech4 жыл бұрын
I don't understand bud, the warfet IS a mosfet.
@DannyMNL2 жыл бұрын
Bit late to the party, but there is a difference. An internal hardwired mosfet will protect your trigger contacts because there's only a low current passing through them through a signal wire. An inline plugin mosfet will not protect your contacts because the full current will still travel through your contacts and spark as you make contact, which damages them over time. All that the inline mosfets do is give you control over rate of fire and maybe give you burst fire.
@opairsoft81004 жыл бұрын
Only thing that absolutely sucked on older vfcs was the piston. Would strip supper fast. Mine lasted only 20k rounds before yeeting itself
@ragnarok_loco57653 жыл бұрын
I'm 15 when I get a job 16 im going to buy a tm hk416 the recoil one and could I get you to work on it
@GainsGoblin11 ай бұрын
The hex screws on these motor plates are the worst.
@anthonyfrancus85804 жыл бұрын
would one of those 70£ sandblast closets not be handy for you? I have one and its suuuper handy dandy to remove any type of coating an rust to the bare metal
@NegativeAirsoftTech4 жыл бұрын
I have a full size cabinet, however the metal was badly damaged & if I had blasted the pieces it would have cost him a fortune.
@anthonyfrancus85804 жыл бұрын
@@NegativeAirsoftTech aah I get you, always one step ahead of me you sneaky bastard :P
@IratusSerpentus4 жыл бұрын
I do like a good 416
@fkc7654 жыл бұрын
very good video
@extreme_loe3 жыл бұрын
That gun is like the old man who has seen too much
@NepaAirsoft4 жыл бұрын
Did you replace the Cylinder with the hit on it?
@NegativeAirsoftTech4 жыл бұрын
Nah, thought I'd leave it in there ;-)
@NepaAirsoft4 жыл бұрын
@@NegativeAirsoftTech - Good conversation piece on the replica!
@NegativeAirsoftTech4 жыл бұрын
@@NepaAirsoft it had an e&c cylinder in the end :-)
@tophatvideosinc.58584 жыл бұрын
mate youre gon have to show us how you painted that
@steviejc6664 жыл бұрын
Was there any sideburns in the gun?
@NegativeAirsoftTech4 жыл бұрын
Yes, it does belong to Sideburns Jim!
@jimwentworth-brown27534 жыл бұрын
leave ma sideburns alone......lol
@steviejc6664 жыл бұрын
@@jimwentworth-brown2753 never x
@jimwentworth-brown27534 жыл бұрын
I miss the Mall but more I miss the cracking friends I made every time I played there...now that's a rare thing these days
@war1134 жыл бұрын
This rifle is now beautiful.I would buy this in a heartbeat... Do this with an ak!!!!
@SemperReloading4 жыл бұрын
Watching you fixing guns can never go wrong.
@Micromation4 жыл бұрын
Have you by any chance had contact with Cybergun's FAMAS F1 EVO with Mosfet? Are they servicable out of the box or do they need some work? I've heard internals are Frankenstein and there are not many parts available. I obviously know fuck-all hence my question to an expert on the matter. And if not - which bullpup available on the market in AEG segment is worth looking at?
@mjolnir4114 жыл бұрын
Looks like a COD camo
@willsahraoui37584 жыл бұрын
Luke, how on earth did that cylinder get dented?!?! 😅
@NegativeAirsoftTech4 жыл бұрын
I did some testing - a . 3g up close at just under a joule will do that to a vfc cylinder. A Cyma brass cylinder was unmarked.
@willsahraoui37584 жыл бұрын
@@NegativeAirsoftTech Wow! I've got a VFC cylinder from a scar Infront of me now, if the customer had the budget I'd change it out. 😬
@pablo-xf3jb Жыл бұрын
lol the Song is from Die hard trilogy
@isaacshively67054 жыл бұрын
So I have a Lonex gearbox shell, Lonex blue piston, piston head, cylinder, cylinder head, Guader air nozzle and Guarder 16.1 gears and I just ordered a Warfet and a Speed trigger so now I need a how to shim for dummies because that's the only thing I don't know how to do myself... Anyone know of any good techs that have a KZfaq channel that can make a video about shimming that's not 30 fuckin minutes long?
@adamd17384 жыл бұрын
how can i get in contact with you
@NegativeAirsoftTech4 жыл бұрын
Facebook
@adamd17384 жыл бұрын
@@NegativeAirsoftTech i don't have facebook mate....
@chrisferland99054 жыл бұрын
I don't know if you read the comments or if anyone in these comments can help me but I'm really new to airsoft and I'm look for a gearbox and motor that can give me a decent fire rate and is reliable I'm not looking to make a bullet hose. Asking for suggestions
@NegativeAirsoftTech4 жыл бұрын
E&C
@chrisferland99054 жыл бұрын
@@NegativeAirsoftTech Thank you and love you content by the way.
@sakthifebriansyah6514 жыл бұрын
@@chrisferland9905 E&C is good. I would suggest SHS parts as theare cheap and decent
@Crystal.Matthew4 жыл бұрын
Now, as someone with an anime pfp, my opinion doesn't matter, but the transitions are a tad bit violent visually.
@war1133 жыл бұрын
Can you move to canada...I could use your help for my tr16 :)