I told one "If the child was not driving then he wouldn't have been killed!", Not had a single call since from the scammers.
@bwatts27794 жыл бұрын
@@nathanhuggins1303 I did something similar I went into detail about a bad accident and how it messed me up physically and mentally than he asked wat happened im my accident .... I then explained how I shat myself and while at the wheel still technically an accident 🙃 just in my pants 👖
@ChArLie3601152 жыл бұрын
@@bwatts2779 that's great 😂😂😂
@mattsully984 жыл бұрын
I genuinely appreciate you left that all in🤣
@Pixelponny4 жыл бұрын
VFC is actually really good and should be considered high-end. As long as you put a JG or CYMA gearbox in them.
@askdogs8393 жыл бұрын
Only high end is the body! VFC gearboxs are utter garabage!
@nylesjake9103 жыл бұрын
@@askdogs839 Crazy you say that , have had mine stock going on 4 years now , never a single issue accept 2 years in it needed a new hop rubber and spring. As long as you keep them clean and lubed up and shim it I doubt youll have an issue. I play every weekend running an 11.1 and nothing , works every time I pull the trigger. Or maybe I just got a good one XD and for some reason everyone I run into who also has a vfc says they love them. What VFC do you have?
@nylesjake9103 жыл бұрын
@Soundwave Ya fs I love mine , never had an issue my krytacs on the other hand make me want to vommit every time I look at them. Damn things never wanna work.
@Koscum3 жыл бұрын
@@nylesjake910 By applying the same logic, APS should be considered top tier as well because my friend's APS is still working after 3 years of service. VFC internals are, on average, pretty mediocre and not worth the premium price they charge for the whole package. The externals are wonderful, but I'd rather have an overall better quality balance, rather than the fancy markings where the customers ultimately have to pay for the licence cost.
@lukakrsul12683 жыл бұрын
@@nylesjake910 Not having problems dosent necessarily mean that something is good. We have 2 416 the older one and new A5 one only stock thing is the gearbox shell. For our standards internals are just meh. The are not the worst definelty but when a CYMA whic costs almost half the price has a better internals thats just bad really bad. We have a saying in my country about VFC and ti goes "You only buy it for the markings" . Then again if your happy with its performance thats great for you, for me on the other hand I want even better performances. Also the big question is do you have a EU version or the US, cause they are different. Btw replaying from the different acc ;)
@Rick_Makes4 жыл бұрын
You hit the nail on the head with that cyma mosfet. Someone will have been fingerbanging the trigger like an excitable shoolboy with an 11.1 30c battery hooked up to it then wondered why he melted it.
@martyboi56094 жыл бұрын
I have no idea why I watch all his videos I just do.....
@ArchieKeen14 жыл бұрын
I bet negative airsoft would cream himself if lct made an mp5,
@ArchieKeen14 жыл бұрын
Wayland Lo tbh I think the new IcS mp5 with the split gearbox and all that is really cool but I cant say the reliability of it
@bigrig85394 жыл бұрын
ICS?
@bigrig85394 жыл бұрын
@@Rorschachs_Blot no their mp5
@ArchieKeen14 жыл бұрын
Wayland Lo actually the only proprietary parts in the gearbox is the shell itself and sometimes the spring guide (if it’s qd if not then it’s standard v2) everything else is drop in except if you want a gate titan but a lot of guns need a little bit of dremeling
@ArchieKeen14 жыл бұрын
Wayland Lo no problem tbh I prefer the original spring guide as it’s more directly replaceable but I guess I’m some cases cylinder head and trigger units are usual suspects for needing slight modification to fit in guns
@nickm91234 жыл бұрын
love the ringtone, best dope song ever
@PilotPulse14 жыл бұрын
Absolutely love the videos .... honestly what a great way to start the morning, keep them coming!
@gv7437644 жыл бұрын
Thank you for putting my mind at ease. I had just purchased an CM.097 when that mosfet magic smoke video came out and i'we been cringe-squeezing the trigger ever since.
@wage45984 жыл бұрын
Ikr airsoftology doesn't ever test anything. Like wtf how on earth can somebody thinking that reading off the features and not actually evaluating then
@NgArclite4 жыл бұрын
B.c sponsored videos are stupid. None of them actually review it. Just regurgitate item specs and say a few good things
@rjc02343 жыл бұрын
That's the way the world works. can't make money testing something you got paid to work on!
@NK_Customs4 жыл бұрын
Enjoyed the whole video mate! Looking forward to the next one!
@toy_shout69583 жыл бұрын
Actually I learn a lot by watching your videos. Thanx mate
@DgR17164 жыл бұрын
The knowledge one gains from these vids is much appreciated, and with the swearing and jokes makes it quite funny, a very good watch, also I’m sure I’ve seen that cyma platinum edition in patrol base’s boneyard,is the cracked receiver a common problem with these guns...
@loadedairsoft4 жыл бұрын
I was thinking 🤔 the same thing.
@killamac101004 жыл бұрын
Yeah I’d pay him for lessons!
@DgR17164 жыл бұрын
I’d pay for him to work on my guns,if I knew how
@ggpvbarbosa Жыл бұрын
The fact that this video came up on the following day of me looking up a new MP5 for myself is really funny. Can't say I expected much out of a VFC gun lol. Thanks for the insights!!
@juliusjones78764 жыл бұрын
Another great video. I am new to airsoft trying to soak up as much knowledge as I can. Like you said you always crack me up with no bull and great info. I know you get a lot of comments just wondering I bought a e&l platinum mk18 was wondering what to watch out for and maybe anything that should be changed. Thank you. You’re videos are a great watch man.
@marcusJUJUalty4 жыл бұрын
Really enjoying these longer format videos 👍🏾👍🏾
@gambitcustomairsoft86504 жыл бұрын
That mechanical 3rnd burst is a nightmare! Only ever worked on one, got it in for a service and a mosfet, and it chose that time to break that tiny little nib off the cutoff, resulting in full auto only. Had fun trying to get another replacement cutoff direct from VFC for it, but at least they were decent enough to deal with. But agreed, that screechy whine just seems customary for them!
@Waffledile4 жыл бұрын
I wish I had a tech like you near me lmao. I took my old (over 5 years) second hand custom AKM built from an E&L body kit and what looks to be a CYMA gearbox base and spare parts into the shop because it had broken a couple of piston teeth, and it was having issues firing (later it turned out to be the wiring harness needed replacing). I've been umming and ahhing over what to do with it for a few months, and your videos have inspired me to build a new gearbox for it from the ground up. Luckily I know how to do it myself, I would have preferred a professional like you to have done it for me, though.
@Waffledile4 жыл бұрын
Woops, that explanation got away from me, sorry for the long comment
@effigy22324 жыл бұрын
My favorite response to those calls is "It wasnt accident, it was pre-meditated murder"
@RealSaltygrease4 жыл бұрын
I don't know what luck I've been blessed with, but ive been running a VFC MP5A4 (non burst vers) for 6 months now, only thing I did was put in a m100 spring. Sounds lovely on a 11.1v. Godspeed, Negative.
@tilligetbig9 ай бұрын
This mechanical 3 round burst is a whole different thing
@erdestibor83964 жыл бұрын
hi , love you´r Humor man, thank you for another super video
@RockWeight4 жыл бұрын
Firing test sounds legit with dubstep playing at the same time coincidently 🔥
@CAEeQuilibium3 жыл бұрын
That reply on the cyma is super useful as all the issues I found were about that and you put it to rest. Might I suggest to put that in the title as I've been searching for reviews etc on that issue too and I can't find shit on it. Would probably help a few more peeps. Thx buddy
@Landser_183 жыл бұрын
I'm back is such an great song from dope. Love it
@cky21954 жыл бұрын
No I won’t skip - you’re not the boss of me.
@superalexbr984 жыл бұрын
Very glad that MOSFET issue isn't too much of a problem because I love my cyma platinum ar 10 and that gun only shoots semi out of the box 😂
@charliehendrix12654 жыл бұрын
That last part with that accent was hilarious 🤣 😂 💀
@TheXOMBIE134 жыл бұрын
I watch because you share your knowledge, speak the truth, and are funny as hell.
@shawns.33764 жыл бұрын
I hope I can as good a tech as you when I need work done to my VFC MP5 :O
@Snakenator_WZ4 жыл бұрын
24:42 Eyes of Madness! A fellow Dance with the Dead fan I see ;)
@davidsong46243 жыл бұрын
Now there is ICS CES-P MP5, which is a freaking beast even for a complete stock gun!!! Nothing comparable to it even the VFC MP5 with a warfet. Time to switch from VFC to ICS.
@kobeh61853 жыл бұрын
I ran the M4 QBS from CYMA for over a year with probably 20 thousand rounds or so, all on a valken 11.1 lipo with 30C (which is really pushing the rate of fire past 32 rounds per second.) before the gun finally quit on me. The trigger mosfet unit has malfunctioned and fires without the safety off or trigger pulled. A year of significant abuse with an overkill battery with top tier performance (only upgrade was a hop up bucking) for like 220 dollars. To be honest, not bad.
@ratstriplea37024 жыл бұрын
First, absolutely love your vids m8.
@Ak1M12234 жыл бұрын
Reddit
@DoorlessRyan4 жыл бұрын
Ooooh you’re kidding me, another VFC vid. Fuck yeah this is gonna be good
@sabartadrel4 жыл бұрын
ICS now do a stamped steel version with 3rd burst.
@KILLGAMERSCOOT4LIFE4 жыл бұрын
Don’t forget the programmable precock
@DHMarci4 жыл бұрын
Oh no my poor wallet.
@Xarl-VIII4 жыл бұрын
Im hoping they make an MP5 SD5 again because my old ics one is still amazing but its becoming a show piece
@ConcreteHeat8 ай бұрын
I just bought one of these recently and I get recommended this video lmao
@cheeserat204 жыл бұрын
kitboga would be proud with you on that scammer call.
@mp08984 жыл бұрын
I wake up and see the title "Aw shiet, VFC again..."
@AndrewStonerock10 ай бұрын
I'm thinking about using a cyma sr25 as a base for a 308 sbr. your recommendation is really reassuring to me. I've heard some good, some bad, and was feeling rather neutral about them.
@mattecviii4 жыл бұрын
Damn. It sound hella great
@albertm64694 жыл бұрын
This is very similar to my EF MP5, but mine actually has a normal V2. The motor is shit, the gears are meh, no Mosfet, so it's respond is similar to the vfc you showed on video. I did a quick motor swap and added a pico ssr, and the thing now is a beast
@efclee14 жыл бұрын
😂😂😂😂Brilliant description of how fast you can pull a trigger
not commented before but now....as always a frank honest opinion good job bro keep it up :)
@c1oudyyyc1oud494 жыл бұрын
Thanks for the CYMA Platinum test, I was thinking of getting one and then heard the rumours of the mosfets burning out. Turns out if you're sensible it doesn't happen.
@Shogun00994 жыл бұрын
It *isn't* a load of shit, just don't put 11.1s into it, apparently they cause most of the issues.
@c1oudyyyc1oud494 жыл бұрын
@@Shogun0099 Fair point, I've changed my comment
@joeedwards88733 жыл бұрын
Really glad I found this video about the cyma mosfet, confirmed my suspicion about that silly review on reddit
@opairsoft81004 жыл бұрын
Ah the original vfc mp5 with the mechanical burst was designed by a collector in my opinion, since who ever would think a mechanical burst would be reliable, tm tried it, and it failed.
@jediknight1294 Жыл бұрын
Mech burst isn't even reliable in real firearms, look at the m16 with the fact it can be 3 2 or 1 round depending on cam position. It really makes far more sense to do it electronically
@iaodfsh3 жыл бұрын
I bought a cyma mp5. glad I did because i got a 6 mags for it too for half the price this cost
@setsuna2003 жыл бұрын
They actually stopped making it with the burst function because of this very reason.
@j05h904 жыл бұрын
This made me laugh so much lol
@unfussylobster3 жыл бұрын
I had this issue happen to me as well. I had to order the part from vfc. Turns out when I would release the tension from the arl it would break the special cutoff lever. I think it broke twice till I got it fixed and back to the customer.
@RangerColinLZ3 жыл бұрын
Had one of those MP5s. Found out working on it was pointless and I sold it so fast.
@graham90453 жыл бұрын
Which company makes a good mp5?
@slabgizor11764 жыл бұрын
The guy who stress tested the CYMA stress tested a gate titan in response, he has the video on reddit
@garyevans80834 жыл бұрын
@Negative Airsoft! Hey Luke,,, any chance you have messed with a cyma 041j blue limited edition? What's your views on them? If you have? I have had one for a bit and only been out with it one time due to all this covid crap!!! Could you recommend your preferred hop rubber for it? I feel it is lacking some range,,,, (btw I miss the mall so much!!!!) Cheers mate ;-)
@nxxynx50394 жыл бұрын
Why are electrical faults so common in Airsoft guns? Surely someone on the design team has some form of electrical qualification. I've got cheap kitchen appliances that I give more shit and they hold out far longer than an Airsoft gun twice the price. It's incredible the shit the factories pump out. Electrical faults on stock parts shouldn't be a thing with the price some of these folk are paying. At least VFC has its shit together to some degree.
@disillusionedone92824 жыл бұрын
Love your vids Tosser
@ethanhadfield87454 жыл бұрын
Best channel.
@n8taing6124 жыл бұрын
There are two mp5's from elite force that are good, which is the competition line because they're actually oemed by cyma, so theres no bullshit etu, cut off lever, or self shimming gears
@NegativeAirsoftTech4 жыл бұрын
That's true, I totally forgot about that.
@airsoftTF2824 жыл бұрын
Had one of those, broke mine trying to do a upgrade in the same way, had it at my local shop for close to a year because they couldn't get the tiny little ratchet piece. They had to get one directly from vfc.
@mzjango4 жыл бұрын
Luke, that crack that goes through the rear body pin hole section and down towards the pistol grip on your CYMA M4 - Any idea what causes that? My brother's CA nemesis (metal body) developed the same crack after one game and I can't figure out why - none of my M16/M4 types have ever suffered from it. I was wondering if he actually may have dropped it on the stock.
@Krapper515 Жыл бұрын
The non-biased fact about the platinum MOSFET is that there is a very large failure rate (with an 11.1). I've only heard of 1 failure with a 7.4 and he was using a 30c. Not all of them will fry, but the likelihood is pretty high. Not as bad as VFC though
@killamac101004 жыл бұрын
Thank you very much for making this video. People say some STUPID stuff.
@GrognakTheCreator4 жыл бұрын
Negative I love you videos man! One question - if not VFC, then as an AEG, which MP5 brand would you consider superior and why? I've been looking for an MP5 for ages but I can't decide, what do you think? Thanks mate!
@adamjj0014 жыл бұрын
@@Rorschachs_Blot I picked up a ics MP5, older gun, plastic 6mm bushings, piston and spring attached, full plastic. Replaced with Shs(gears 13:1, piston full lightened, motor HT, cylinder, mushroom head) and it works well.
@Rorschachs_Blot4 жыл бұрын
@@adamjj001 Nice!
@n8taing6124 жыл бұрын
The Elite Force Competition line of mp5's are probably your best bet considering they're the most available and are oemed by cyma so theres no vfc stuff inside (negative approved of them in another comment I made)
@jediknight1294 Жыл бұрын
I know it's a late reply but cyma platinum or ICS full metal top end line.
@davidfleming7933 жыл бұрын
The Oscar for best merican accent goes to............ Lol, that was great!!
@untrust20333 жыл бұрын
25:41 XT60 or XT90. Probably not the best for airsoft. Much more common in all the RC circles and all that
@iota5152 жыл бұрын
Why is it not good for Airsoft?
@untrust20332 жыл бұрын
@@iota515 it's a perfectly fine connector, just nowhere near as common in Airsoft as tamiya etc.
@hawaiiairsoft80874 жыл бұрын
Fucking brilliant as always! Great stuff!🇺🇸🇬🇧🌴😎🤙
@kewldude0074 жыл бұрын
Hi, im the guy that killed 2 cyma ETUs. Im excited to see that it lasts on 7.4v. I only have/use 11.1 which is why I tested with that.
@NegativeAirsoftTech4 жыл бұрын
Hi bud! So when you said I should have tested properly, you meant "but niether will I in a sensible way?" Lmao.
@kewldude0074 жыл бұрын
Negative Airsoft My intent was worst case scenario. Which I clearly achieved. Taking it failure was the goal. To find its limit.
@NegativeAirsoftTech4 жыл бұрын
@@kewldude007 no it wasn't... you said I didn't do my testing & then did your own in a rather daft way, on the wrong mosfet, and killed it! C'mon now!
@NegativeAirsoftTech4 жыл бұрын
@@kewldude007 I honestly don't mind legitimately being called out by people, I've no issue being wrong- I make myself the butt of the joke, it's a joke channel but understand that I do respond ;-) I really do appreciate that you tried to help people though, it's my biggest 'thing' just make sure you don't mention a professional airsoft twat like me, because I have no filter! Lmao
@chrismartin38714 жыл бұрын
Negative Airsoft so just to be sure... running one of these with an 11.1v would be a wanker thing to do, or you could as long as you don’t finger bang the trigger like a drunken bridesmaid at your mates wedding?? I’m getting the Umbrella branded version after seeing your vid and recommendation, but only have 11.1’s at home so I’ll order a 7.4 if it’s gonna fuck it using 11.1v
@mrbonecardiff63344 жыл бұрын
Keeps the vid rolling through the call just to fuck off a spam attack 😂😂😂 class
@gabrielreyesmedina42222 жыл бұрын
Hi!! Hope you’re doing well, I’m from Colombia and I have seen your videos before, so cool, right now I have an adaptive armament m4 but I can’t find the correct spring guide for this gun, if you can help me with some advice it would be great!!! (Sorry if my English is not good enough)
@willowrabbit4 жыл бұрын
Any thoughts on the "avalon" mp5 that ditched the burst mech?
@thunderkiss25713 жыл бұрын
I'd like to know too...
@planetcaravan29252 жыл бұрын
No
@hal7524 жыл бұрын
Out of curiosity couldn't a aster or a perun be fitted to mitigate the whole cut off leaver issue?
@Montimon13 жыл бұрын
hands down 4 your chanel^^ no one channel show me to open and repair my kritac kriss vector^^ you do it and a lot futher . thx^^
@gringostarr42343 жыл бұрын
What’s the name of the song that plays while he talks about how shit the cutoff lever is?
@Lumaci4 жыл бұрын
Just for your intro, got the same gun as you. Theres two gen of the mosfet, or in general gearbox. Mine is silver, you can program the one in the silver version and it has a few more things activated by default, maybe its those version whos prone to breaking? The V1 of the mosfet, also known as just the E line mosfet cant be programmed you could test it out by flipping the selector 3 times from Semi to Full auto if it beaps its the new gen.
@cbr600rrturbo3 жыл бұрын
What about the one with a Avalon gear box? Thanks
@xtairsoft4 жыл бұрын
Excellente'
@Randalf4 жыл бұрын
What do you think of the ICS SplitGearbox MP5A5?
@brorjordas19794 жыл бұрын
Fuckin awesome video! (Nope. Still not into airsoft AEGs.. but these NA videos are just so good!) After that phone call I were just expecting to hear that "No. This is not my MP5. This one is stolen..".😂😂👍
@DarkSteel3614 жыл бұрын
Unfortunately VFC is the only option for MP5s stateside
@serge45374 жыл бұрын
My friends are convinced kytac and vfc are the best airsoft companies
@fasterthanaturtle Жыл бұрын
I'm new to airsoft, just bought a Daniel Defense ddm4a1 with cyma platinum. I know most of these parts doesn't apply to mine. Is the rules about the 11.1 lipo the same with all platinum accept if it's replaced with a titan trigger? What is the desire of going higher than a 7.4v?
@bertayoing4 жыл бұрын
that spam call?hilarious mate.hahahahahahhahaahah
@Hazztech3 жыл бұрын
So if you want a mp5 with good external quality, what should you get?
@subsyairsoft4 жыл бұрын
I’m at 2:53; love you mate!! Lmfao!
@Kuhrz3 жыл бұрын
That last 3 minutes tho 😂😂😂😂
@NeCtRiCkS3 жыл бұрын
What’s the first AEG - the tested one? EMG?
@danidiper6664 жыл бұрын
Hey where do you buy all those warfet?
@tjstiffler36813 жыл бұрын
I bought one and it fried the first day. So it does happen. Using 7.4 25c on semi. Guess it's hit or miss.
@VoidShepherd4 жыл бұрын
Quite the way to cure a hangover.
@Enetso4 жыл бұрын
Just out of curiosity, as a fellow lover of the MP5 platform, which of the airsoft MP5 offerings on the market would you recommend? I'm looking for the best combination of authentic look and feel and reliable/upgradable parts. Price isn't an issue as long as it isn't so expensive that you'd be scared to even bring it to a field. Edit: Thought I'd ask here, because you seem like you know your stuff when it comes to these bad boys. Both AEG/AEPs and GBBRs (GBBSMGs?) are fine.
@ryzenenjoyer28244 жыл бұрын
tokyo marui has great guns (mp5 also), i dont know about any other brand, possibly cyma (mp5)
@planetcaravan29252 жыл бұрын
@@ryzenenjoyer2824 TM mp5s are trash lol
@jediknight1294 Жыл бұрын
Cyma platinum.
@airsoftersanonymous19034 жыл бұрын
So what mp5 should I buy? I want to get the old ics mp5
@kaydeear7 ай бұрын
My CYMA mosfet died on a 9.6 nunchuck, their mosfets are extremely fragile but the internals are solid
@callumminshull68524 жыл бұрын
What's the best way to get in contact with negative airsoft. For getting work done???
@rogerborg4 жыл бұрын
Liking it before watching, just to give Luke something to froth his gash over.
@Asomodai4 жыл бұрын
I came before even watching. Hope Luke appreciates it.
@HAV0X_4 жыл бұрын
Would you recommend a JG/Snow Wolf AUG? Asking if you have seen problems with them/ have ever teched one. Also unrelated, what is the best way to get FPS down to about 300-350 FPS?
@TheDoddridge3 жыл бұрын
If you haven't bought one yet, definitely the JG. the quality of the plastics and metals are much much higher. The only 2 advantages to the snow wolf are the semi fire and the quick change spring, but you can always just change out the JG gearbox down the line for an ASG one and get a quick change spring. And you can make your own semi lock. But you can't make the snow wolf's Externals any better
@Darkmer6662 жыл бұрын
my buddy had one the MP5 mech burst and the trigger nub snapped on the trigger itself and couldnt find a replacement trigger so it sits in a shoe box to this date
@latetooairsoft67843 жыл бұрын
Is this the mp5 with vfc Avalon gearbox?
@Alecbassindale--4 жыл бұрын
Might try that finger action on the missus🤣🤣🤣🤣🤣🤣
@Francisco.Figueiredo4 жыл бұрын
I loved VFC, now after seeing so much videos of you repair them. Not so much. But I dont know what a high end is.. Because to me VFC was the definition of that. So the question is - What are the brands of High End AEG?
@MaIGaming4 жыл бұрын
Cyma Plat, G&P, E&L are all great guns
@NegativeAirsoftTech4 жыл бұрын
@@MaIGaming King Arms have too many lemons.. 2 out of three that I see are badly built
@ArchieKeen14 жыл бұрын
Lct they are pretty solid from most accounts and have good qc
@n8taing6124 жыл бұрын
LCT, Cyma Platinum, E&L, G&P, ICS
@MaIGaming4 жыл бұрын
Negative Airsoft Alright thanks for that heads up then, fixed it for future reference. Thats an absolute shame though because when they dont come having already shit themselves they’re absolutely tanks