Victron Multiplus II 12V - Model Comparisons

Рет қаралды 29,586

Жыл бұрын

Logan explores the differences and updates in the new Victron Multi-plus II models, specifically the 12V options.
The MultiPlus-II 2 x120V is the perfect one-box mobile solution for standard North American 50A 120/240VAC split-phase applications. Whether it is supplied from shore power or a generator, the MultiPlus-II 2x120V can accept and passthrough both lines of a 120/240V supply, with the capability to utilize the full 50A for charging and AC loads. When connecting to a single phase 120V supply, the L1 input of the MultiPlus-II 2x120V will accept incoming power for charging and passthrough, while combining the L1 and L2 outputs for single-phase 120V on each line.
The MultiPlus switches to inverter operation when no AC source is available. The inverter output is also 120V single phase. In inverter mode, the MultiPlus-II 2x120V internally connects both lines L1 and L2 together to provide 120VAC to loads on either output. Therefore, in all connection circumstances, both sides of a distribution panel will be supplied with 120V. However, 240VAC is only available when the MultiPlus is supplied by a split phase 120/240VAC source. This prevents heavy loads such as water heaters or 240V air conditioners from discharging the battery.
The MultiPlus-II 2x 120V has all of the expected features of our versatile inverter/charger range, including PowerControl, PowerAssist, Input Current Limit, two AC outputs, as well as parallel and 3ph configuration for larger capacity VE.Bus systems. Suitable for LiFePO4 batteries and a variety of other battery technologies.
Features and Specifications:
Multifunctional, with intelligent power management
Two AC Outputs
Virtually unlimited power thanks to parallel operation
Split phase options
On-site system configuring, monitoring and control
Remote configuring and monitoring
Input voltage range: 9.5 to 17 Volts DC
Output voltage: 120 Volts AC +/- 2% @ 60 Hz
Continuous output power (77° F): 3,000 Volt-Amps (VA)
Zero load power: 19 Watts; 4 Watts in Search mode
Maximum battery charge current: 120 Amps
Dimensions: 22.75" x 10.82" x 5.8" inches
Weight: 48.5 pounds
5 year warranty
Questions? For the fastest response please call 1.800.383.0195 or chat live on our website
We are NAZ Solar Electric, formerly known as Northern Arizona Wind and Sun (NAWS). We have updated our name and our look to reflect who we are in 2023.
What hasn't changed: Our ownership, our team, or our commitment to our customers.
NAZ Solar Electric, or NAZ, is a supplier and distributor of solar equipment based in Flagstaff, Arizona. For over 40 years, we’ve designed systems and provided technical support for residential and commercial customers across the U.S.
Phone: 800-383-0195
Email: sales@solar-electric.com
Website: solar-electric.com
Use the online load calculator to estimate your average energy usage: www.solar-electric.com/solar/...
NAZ Solar Electric would love to send you a price quotation on individual components or an estimate for a complete plug-and-play system. Let us know what you're looking for and we'll send you a quote within 24 hours (Monday - Friday).

Пікірлер: 35

@NAZSolarElectric Жыл бұрын

For a quicker response, please give our solar engineers a call (800) 383-0195 or send an email: sales@solar-electric.com. Thank you!

@robbehr8806 Жыл бұрын

I bought a 12V MultiPlus II from Logan as part of a system. Logan and all of his co-workers are polite, professional, and helpful.

@NAZSolarElectric Жыл бұрын

Thank you Rob!

@matthewknight5641 10 ай бұрын

I love my victron 150-70 charge controller and im buying another 150-70 for another 1850 watt array very soon. Victron is expensive but seems to just work

@NAZSolarElectric 10 ай бұрын

It is very popular and we tend to agree! Thank you for the feedback!

@igorkvachun3572 Жыл бұрын

Yes solar system ☀⚡🔌🔋💡👍

@SublimeTree Жыл бұрын

Thanks for the info. I'm configuring a system and I like the sounds of the multiplus 2 2x120v. But I don't no if it's best for a 24v system on a rv with a 30 amp system currently. Any thoughts would appreciated.

@MrSummitville 11 ай бұрын

@WoudstraSublime - The MultiPlus 2X120 was specifically designed for 50 Amp 240v RV's.

@earlzeis35 Жыл бұрын

More information on the add on current clamp please.

@NAZSolarElectric Жыл бұрын

Earl, we would love to answer any additional questions you might have. You can chat with our engineers live on our website, call 1.800.383.0195 or if you leave a specific question here we will make sure it gets answered as quickly as possible.

@keithbar19741974 Жыл бұрын

Excellent video, what is not clear to me is the benefits of the original Multiplus over the new Multiplus II. In what use case would the original be the right choice? Usually when a new model of something comes out the old one is no longer produced but I still see lots of installers using the old version. I can see that for replacement you might want to get an old one but for a new install I can not see why you would not always go with the Multiplus II or IIx2

@NAZSolarElectric Жыл бұрын

Yes, that is interesting!

@MrSummitville 11 ай бұрын

@keithbar19741974 - The newer units MP-II ... The noise is much louder and the transformer hum is terrible. Consumers who installed the MP-II in an RV and even in a home are complaining about the noise.

@evergreeninvest 4 ай бұрын

Hi, for me if the original version was much cheaper and If I had the space than I would probably consider buying it. I'm researching my options to install a charger/inverter in my class C motorhome where I have space limitations.

@Noah-qt3rq Ай бұрын

I would also mention that the multiplus 2 has a lower idle consumption.

@MrMinnesota99 Жыл бұрын

Is the charger power factor corrected? What is the power factor while charging?

@robbehr8806 Жыл бұрын

The Victron is manufactured in Europe, where rating in volt-amps is popular. For the 3000 VA version, I use a power factor of .8, which means 80% of the 3000 VA for converting to watts. So, the converted rating is 2,400 watts, which calculates to 20 amps at 120 VAC. BTW, most people try not to load any circuit for continuous use beyond 80% of maximum rating of the lowest rated component. Victron is really good, but a continuous load of 16 amps would be my maximum. I'd allow startup surges beyond that, but I limit running load to 16 amps.

@awesomedee5421 Жыл бұрын

I want to see the 48V comparison

@NAZSolarElectric Жыл бұрын

We do have more videos planned, however if you would like more info on the 48V please feel free out to our team. They are available via live chat on our website during business hours www.solar-electric.com or you can call 1.800.383.0195. Thanks for watching!

@carlosreyes6448 10 ай бұрын

Is power assist available on, all muti plus ii, inverters? Meaning 12v 24v and 48v.

@NAZSolarElectric 10 ай бұрын

Hi @carlosreyes6448 , yes it is! It's a feature of all Victron Inverter/Chargers Multi's and Quattro's.

@carlosreyes6448 10 ай бұрын

@@NAZSolarElectric thank you, I appreciate it. And one more question. Is it 50amps. Input on 120v. And on the 2x120 50a for each leg? So 240v input on the 2x120v

@calculatedrisk114 Жыл бұрын

I assume the multi plus 2 2x120 is a 3k watt total unit. Not 3k watt per leg?

@NAZSolarElectric Жыл бұрын

From our engineering team: The Multi-II 2x120 is rated for an AC throughput of 50A (each leg). So the AC transfer is rated for 6kW per leg (typical of a common 50A RV Service) or 12kW total (at 240V). The inverter can invert and supply power (off-grid) up to 2.4kW (or 3kVA dependent on power factor). Several inverters can be added in parallel to increase the off-grid output proportionally. When the inverter is supplied with a 120V input, it will parallel L1/L2 and it can (in assist mode) boost the power output to both shared legs by up to +2.4kW (total). When provided a 240V input the inverter will split the legs (maintaining the split phase configuration) and in this mode the inverter will only support (assist) L1 with up to 2.4KW of boost power. For more information please feel free to reach out. Chat live on our website or call 1.800.383.0195

@jarvisbarthelmy6307 11 ай бұрын

Do you have 24v to 220v 3000w units

@NAZSolarElectric 11 ай бұрын

These are not as common here in the US but we can get you any inverter Victron offers. We typically stock the 120V version but most of the 230V versions are available with minimal lead time. Feel free to call our team so we can get you a quote. 1.800.383.0195

@ronbridegroom8428 Жыл бұрын

I find the Victron series of inverter/chargers to be very confusing and not really suited for the North American home market due to an apparent lack of support for split-phase 240v

@john0270 Жыл бұрын

You need two units to run split phase 120/ 240.

@NAZSolarElectric Жыл бұрын

From our engineering team: Victron inverters can be configured for native split phase output. We do this quite often and it involves stacking two inverters in a 180° offset orientation. One inverter would handle L1 and the other handles L2. It's a feature in the advanced configuration and it's possible with all Mufti and Quattro models. Victron products offer nearly unlimited configurability and there's really no other product on the market that compares. However, I do have to agree that some of these features can be very confusing. Luckily our team is here to help and support our clients with these advanced projects. We can even help by doing the configuration for you remotely, if needed.

@MrMinnesota99 Жыл бұрын

I agree, why don't they just install the transformer from their autotransformer into these multiplus units?

@MrSummitville 11 ай бұрын

@@MrMinnesota99 You could. But their main market is Europe. Europe does not have 240v/120v Split Phase, like the USA. So, they sell one unit and allow the USA Dealer or consumer the option to add the Autotransfomer and/or stack two units in Split Phase mode.