Straight out of Mission Impossible

This is so well thought out, Caleb. Fantastic work. Love this!

Brilliant setup + You just keep on delivering the cleanest videos on KZfaq, so thank you for that.

THIs is a really impressive job, and gives me tons of ideas!

This gets my gear nerd side so excited. Woooo!

Caleb sharing every single bit of his work for free makes me wanna not skip ads whenever I watch his videos. Just a very small price to pay for everything I've learned from this awesome dude! Kudos to you!

Very impressive how you've managed to describe the design and building of this great project with perfect pacing. You seem to have made all the right choices of what to put in what to leave out. Not a boring second, yet so much is covered. It's a lesson for video producers in its own right

Incredibly cool for us nerds! Nice work, Caleb!

If you sold this prebuilt I’d buy it.

This is GENIUS dude ✅ Well done! 👏

This is such an insane solution! OMG! Unbelievable the stuff you come up with and how incredibly helpful it is. BLESS YOU and everything you do for this community!

This is beyond impressive. Love that you share your knowledge on authentic niche content rather than riding on the obvious like so many creators.

Such a great idea for mobility! One thing to note though : ATEM Mini does not have dedicated Multiview, they are only available on Pro and ISO. I noticed you were using the PRO version on video, but provided links for the standard version instead.

Nice build! A few suggestions: a 3D printed cut out for the monitor would be a nice addition. Using one could cover the leads on the right side of the monitor. Also, this extra part could be used to place the power switches on the left of the monitor instead of near the handle. This prevents the user from accidentally switching on the device(s) when carrying since they are that close to the handle. Last tip: using a slightly bigger case would offer space for an "internal" power source (battery or power bank of some kind), which would make the case ultimate portable.

Awesome idea! Very cost-effective and smart for traveling producers. One thought: have a custom plate made for the I/O on the back and run jumpers from the ATEM to the plate. That will help relieve stress from the relatively constant plugging/unplugging that would occur in a portable environment. We do this in live production world using companies like full compass and redco when building custom live streaming cases. It may require a size up in Pelican cases, but that would also give you room for a larger monitor and still be within carry-on size for TSA requirements.

Props to you for coming up with this idea and building it! The only thing that came to my mind to improve it a tiny more would be: just a square of Velcro on the back (Top lid) cause you know there’s always something to hang on empty space :p haha more seriously could be useful for battery or wireless HDMI receiver ;)

Can’t believe it. I was just thinking about how this could be done and boom -you’re on it! Your my DIY hero.

Well done. Pelican cases are so awesome with what you can do with them. We motorcycle riders do all sorts of things to them for travel cases. Mostly for mounting and running power to them to charge devices inside while the motorcycle is running. One thing I would recommend: a cover for the back panel for all the connectors. For protection from travel bumps and the elements when not in use. Just add a cover to the 3D printing parts list. Add a rubber gasket to the under-lining to the perimeter of the cover: Most electronics places should have that or even use some decent foam that you can buy with the Pelicans and then cut/glue as needed. You can hold the cover in place with screws and velcro or if you want to get fancy, you can rig a hinge/lever mechanism you can probably design with cheap parts you can pick up at Home Depot. Yes, I've put in a lot of thought as I was thinking of doing something similar. Except I'd use a 1520 model case and put 4 monitors in it and fit a sound mixer as well if possible: Certainly bigger than your setup. I just wouldn't want to use one monitor.. And if I use Pelicans for more gear as most studios do, the 1520 would stack better with the others. Again, well done. Your blog will help me in designing my own. Keep up the great work!

Genius. Love this design.

You’re a wizard, Caleb. Even bolted on a vent 🙌🏼

Absolutely excellent! :)

Kudos Caleb! This is just such an elegant approach to a real problem with 'cable proliferation'. I can't wait to get to building this unit. Thank you for your hard work and thoughtful videos. Always an informative pleasure.

Your channel is one of my favorite on youtube! So resourceful and informative, also I love the way you describe things! Whenever I am looking something about dslr video gear I search to see if you've made a video on the topic. And then sometimes I come across gems like this I would have never thought of but immediately am stoked on the idea of. I seriously want to make all of the gear tutorials setups that you rig together on your channel!

The future is now! This is so friggin’ cool.

This should be a product readily available! Good job!

Just finished building my own. Definitely a fun/frustrating experience. The HDMI ribbon cable didn't last very long so I'm waiting on a replacement but otherwise it works great. Also I used a coiled 1/8" audio cable to route the headphone jack and ran the other cables through the coil. It's super clean. Thanks for sharing!

This is the best case build i've seen for the ATEM Mini yet! Totally loved this!

The details... 👌🏼 Sir, you are a genius.

The only "disappointing statement" in the whole video was your invitation to companies to embrace your idea and mass produce the "ATEM Carrier". Man, this is a breakthrough! It could make you the Zuckerberg of the ATEM Mini or the Jobs of the Blackmagic miraculous gadgets. I would buy it under the Caleb brand, seriously! I love the video a million times. Of course, I cant risk embarrassing myself attempting to make one ... lol

this whole build and look is just stunning! So clean and so professional. Great job on the project, with incredibly detailed explanation and build tutorial.

Great work and inspiration for the limited budget DIY guys like me. Did mine with some changes and is working great. I add 2 cold shoe mounts in top sides when open with DC jacks for wireless receivers and is a keystone wall plate in the back with HDMI, CAT 6 and usb C plugs. USB ports for charging devices (12V 8amp for more juice ) 👍

Plot twist: Caleb changes the channel name to: "The MacGyver of Multi-media" Story at 0:02

SICK!

If Inspector Gagdet and Marie Kondo had a child... You always amaze us with your clever ways of saving space and adding functionality to video production. Well done!!!

This gives me inspo for doing this. I have a sling studio now and am looking at switching to an ATEM system. But the thought of all of the cables kills me for on location use. This idea solves most of the problems with this crazy setup. This is smooth as hell. I love it.

I don't even need this but I want one! I want to need this, this is so cool!

Much larger, but I used a ProX 19" Slant Rackmount Case that fits the ATEM mini on a shelf, a sliding shelf puts the laptop either at my fingertips or out of the way, a 14" hdmi monitor covers my second screen, and a rack-mount, switched power distributor handles AC, USB power, and gives me a power switch for the ATEM :) Does a great job hiding the cable clutter and keeps the setup from "spreading out wider" with computers/monitors/switcher/etc. KZfaq makes it sort of tough to share a photo, though :)

I just got my parts printed from my local 3d printing guy in Hialeah, FL. He does amazing work, this setup is going to look so clean and professional. Thanks Caleb for doing this for us pros!!!

Just picked up an ATEM Mini Pro and this got me very excited to use it and try something like this as well! Excited to do some creative videos with it on my channel. Thanks for making this very detailed video breaking everything down.

You really should start a kickstarter project, almost guarentee you'd sell loads.

You should trademark this as a product. i would buy it.

Love this kind of stuff. Efficiency, organization, and Practical.

Love it, ironically bought a pelican case with foam and just using it to store my atem, so clearly got room to make this happen...thanks for sharing.

You should totally patent and sell these. You'd make Millions! Really fantastic idea. You really should approach a few of the case companies. Even talk to Blackmagic. They might love this idea.

Good Lord! You are my savior and also the reason why I spend so much money right now lol. Thanks so much for this video and the detailed guide on your blog!

Great build Caleb....you continue to raise the bar on ideas and execution. Thanks!

Yes! This is exactly what I need for my ATEM Television Studio HD, I’ll just have to get a different size case and figure out new 3D printed parts, maybe even one big enough to house my encoder too, so it’s an all-in-one live-streaming box. Thanks so much, definitely going to look into making this.

this makes me wish i needed an ATEM Mini.

Well done. I am trying to decide whether to purchase an ATEM mini or the Feel World switcher. Any thoughts?

This is a great all-around . it can cover small to large projects .You're a gift to all of us .thank you

This is awesome! I've seen a lot of these in the ATEM groups but nothing as well thought out as this! Thank you!

this some real quarantine productivity

I'm ready to shave my head now. This is pure genius.

You must have some trolls and haters out there because I can't imagine why anyone would thumb down what you did. I've been looking at these switchers and you just took it to the next level! Kudos for the time and effort to make this and share all of this with all of us...freaking sweet!

So where's the link to pre-order this lol.... I'm ready to hit the buy now button. OMG this is perfect!

Absolutely Genius. Man, now I wish I went with the ATEM over the SlingStudio. haha

I definitely wanted to try something like this when I got my Atem mini pro, you just did it way better than what I imagined!

Awesome! I just got the Atem mini pro. This will be a perfect way to implement it! Thanks for taking the time to 1-come up with the idea and 2 share it with us.

I was NOT ready for this case porn... Gorgeous stuff! The only add-on I would recommend, which I don't know if possible, or how exactly, is a travel cover for the back side cutout. I'd be worried about dust or sharp metal stuff getting inside the back ports area. Magnetic maybe?

My first thought was "I wonder what he used to seal around those switches," and then I saw the back. That's okay, you probably aren't going to be streaming from the deck of a fishing trawler in the middle of a storm. You have done such a fantastic job on this otherwise so why not print a cover to keep dust out and protect those back ports when you toss it into your trunk or whatever? Or did I miss that?

Dang so impressed by this! So many intricate details and those 3d printed parts are awesome!

Next level, I love this kind of stuff! This kind of stuff is the future of filmmaking

Please contact Black Magic and help them produce this. It is amazing.

Why don't you price it and sell it? I would like to buy one if you have more.

Awesome vid. I did mine with a pelican rifle case. But u just taught me how to power route everything!! Thanks.

Wow!! Great job man! I remember when you were hacking up that gh4 and I was so inspired seeing you get in and modifying it, this is such a great evolution.

It would be great if you sold this as a kit in addition to your shirts.

I would buy one if you decided to mass produce. Even if you would provide the parts as a kit with instructions. Man what an opportunity.

by far the best setup i have seen yet. I would buy it in a instant. Great job on the project.

This is AMAZING. I have done a ton of live streams from various remote locations and I would have LOVED to use this.

Can I just buy one from you?

Have you considered selling the case? without the ATEM Mini and the monitor ?

Wow this is so exciting and amazing. Tons of use cases!! And I agree this should be mass produced. Thanks for sharing.

Holy smokes, man! Outstanding, well thought out and beautifully designed! I have an ATEM Pro coming that I presume is the same size and if it is this case project is an absolute must. Awesome! Thank you for the fantastic idea!

Caleb is the Adam Savage of A/V KZfaqrs.

Would you be selling these kits ready to assemble I would be interested in purchasing one. I have both 7" Monitor and Mini PRO

OMG! This is awesome! Just recently bought atem mini and wanted to have something like this! Thanks a lot!

I Was thinking of a hard case build for my Atem Mini Extreme ISO when I saw your video, I learned so many ideas in this video, Thanks, Dude.

If there was space to store the power supply... You still have to carry that separately and not forget to pack it.

An English proverb says : "Necessity is the mother of invention"

Excellent work dude! I love my atem switcher and have been wanting something like this since it’s release 😃

Just cant stop saying wow...This is beyond genius, this is pure engineering. I salute your knowhow but produce this en mass and i will buy one of this

This is incredible, and I really wish I could just drop some cash and have one shipped to me from a reputable manufacturer.

DIY-ers be like: This large gap is for air flow

thank you so much, Caleb. will for sure go to your blog and purchase all the items and put it all together, step by step.

Wanted to say, really great design, well thought out, robust & tidy! Thanks for sharing! 👏👏👏

Over at Wedding Film School we have a similar setup shown in this video, love the portability of your unit though! kzfaq.info/get/bejne/idednreG26zGgnU.html

This is so awesome! great build

amazing build. I love watching video like this.

Just finished building mine! this is awesome

This is amazing! Excellent work!! I can't wait to take on this build.

Will absolutely be doing this setup. Thankful for where I work as I fabricate using a cnc router, a laser and a 3D printer. Was looking for something very cool to work on....found it! Great video :-)

Great job - a very neat solution for this wonderful switcher. Good stuff!

Really solid work, this really is a functional and portable set up that makes sense, bravo!

Very well thought out!! Great job!!

*Total Genious ! Amazing ! Quality Work ! Very Practical !*

that setup looks awesome!

This is off the hook, Caleb! Terrific design and great video.

Bravo! Awesome build!!!!

Dude..your are the MAN!!! Lurking round your channel but now subscribed