Vintage bike restoration Moser AX Leader with Campagnolo C Record

Рет қаралды 12,623

Жыл бұрын

Today's video is a lot more complex than usual. I bought a Moser AX Leader at incomplete Campagnolo C record, slightly rusted.
So, this time I will not only disassemble the bike, clean it and put it back together as always, but I also have to deal with the peeling chrome and finally repaint parts of the frame. For a perfect result, I took the parts to the last screw apart, cleaned them, polished them, greased them and put them back together. I hope you enjoy this extensive restoration with me. Please subscribe to my channel.
Do not hesitate to contact me for any custom builds or restorations you may think of.
Dnešní video je o něco komplexnější než obvykle. Koupil jsem kolo Moser AX Leader na 75% Campagnolo C rekordu, lehce napadlé rzí. Takže tentokrát kolo nejen rozeberu do šroubku, vyčistím a znovu složím, ale navíc musím dolakovat zadní vidlici , která byla rezavá s loupajícím se chromem a některé další drbky na jinak poměrně zachovalém laku. Díly jsem klasicky rozebral vyčistil, vyleštil, namazal a znovu složil. Děkuji za podporu a kdo ještě nemá odběr - klikněte prosím na odebírat.
Neváhejte mě kontaktovat ohledně restaurování a staveb silničních kol.

Пікірлер: 52

@aluminati9918 Жыл бұрын

Great work as always! Moser bikes look classy. I had the chance to visit Mr. Moser at his wine farm earlier this year. Very memorable day, including a showing of his old race bikes at his showroom. Keep up the good restoration work!

@OnRoadVintageBikes Жыл бұрын

Thank you very much for your support. Oh, it's a great honor to be with Mr. Moser himself. Congratulations!

@ralphc1405 Жыл бұрын

I think his first batch of bikes were lugged construction. Later on he started fillet brazing tubes which I remember reading back in the 90s was SUPER time consuming and tricky to build. Always lusted for an AKI Gipiemme brazed Oria frame back then!

@charlesmansplaining 6 ай бұрын

Very impressive work. I would love to have a Vintage bike from the 80s just to hang on my wall as a piece of art and maybe take out for the occasional ride but I don't have room for any more bikes.

@OnRoadVintageBikes 6 ай бұрын

Thank you very much for your support, think about what you'll throw away to make room for an 80' bike! These bikes are very comforting to look at and ride. You can't hear anything while driving, nothing forces you to keep shifting (because the shifting levers are far away and there are few gears) Very soothing...I recommend it.

@cristobalromeroperez605 Жыл бұрын

Esa bicicleta abandonada necesitaba pasar por tus manos. Qué gran trabajo!!! Saludos

@OnRoadVintageBikes Жыл бұрын

¡Gracias amigo! Siempre espero sus comentarios.

@aaronlascano9485 7 ай бұрын

Lol. The ufo part was hilarious

@ridethroughlifertl Жыл бұрын

Man these builds are so nice. I love all the chrome. It doesn't seem like you see it much these days.

@OnRoadVintageBikes Жыл бұрын

Thank you very much for the support.

@markfriesen1435 Жыл бұрын

Another outstanding build. I would happily watch two episodes of a build if the first episode included more of the restoration process of the frame and parts. Always looking for tips!

@OnRoadVintageBikes Жыл бұрын

Thank you for your strong support, I don't know how much of the cleaning and polishing work is still interesting and how much is getting boring? I'm an amateur in video editing and I'm trying it.

@johncarpenter5983 Жыл бұрын

Отличная работа,отличный велосипед🤘

@OnRoadVintageBikes Жыл бұрын

Thank you very much!

@nielskjr5432 5 ай бұрын

You must be very tall. It's a big frame. As always beautiful build, thank you👍

@OnRoadVintageBikes 5 ай бұрын

Thank you very much, I'm not very tall, about 186cm, but I have slightly longer legs.

@Vadim_Vorontsov Жыл бұрын

Шатуны 180 мм. - супер! ❤

@jorgealistemartinez9975 9 ай бұрын

Es muy linda montada en campagnolo es una joya

@OnRoadVintageBikes 9 ай бұрын

Thank you for your support.

@user-fw2hl5vc6n Жыл бұрын

Beautiful machine 😍

@OnRoadVintageBikes Жыл бұрын

Thank you for your support.

@duringthemeanwhilst Жыл бұрын

another simply beautiful build 🙂

@OnRoadVintageBikes Жыл бұрын

Thank you.

@Dino-Novo Жыл бұрын

Sempre um grande trabalho, ficou perfeita.

@OnRoadVintageBikes Жыл бұрын

Muito obrigado, sempre gosto dos seus comentários.

@mikefoster3901 Жыл бұрын

Another great build 👏

@OnRoadVintageBikes Жыл бұрын

Thank you Mike very much.

@brrrt6666 4 ай бұрын

Great work, unsure if I'd have liked some repro oria decals or not though.

@OnRoadVintageBikes 4 ай бұрын

Thank you for your support, oria repro, I haven't found the right ones anywhere yet...

@burhanaltncan4527 Жыл бұрын

beautiful work, also nice tools :)

@OnRoadVintageBikes Жыл бұрын

Thank you very much, I love my Campagnou tools ...also because my dad bought it for me more than 20 years ago.

@severs1966 Жыл бұрын

I'm not a fan of this groupset but the crank design is gorgeously beautiful

@OnRoadVintageBikes Жыл бұрын

The whole set is beautiful, but the weight and function is another, slightly sadder story...Thank you for watching.

@goodvibes5487 Жыл бұрын

Typically I love your work, I still do actually, and I don't like to be a critic, especially when it's not something I own, but that's going to drive me nuts knowing you left that one rear leg red instead of re-chroming it...

@OnRoadVintageBikes Жыл бұрын

Reasons why I painted it instead of re-chroming it? 1: I don't know anyone who would chrome it well. 2. I would have to repaint the frame and destroy the original, very well-preserved paint. My decision is therefore like this.

@goodvibes5487 Жыл бұрын

@@OnRoadVintageBikes there is chrome paint also. but you're right, your bike, your decision. It looks great otherwise.

@jakubraimr9898 Жыл бұрын

Beautiful work again. And a great first attempt at painting... A new addition to your collection?

@OnRoadVintageBikes Жыл бұрын

Jasně. Každej obr zůstává doma😄

@BerudPL Жыл бұрын

Amazing build, how did you manage to make campagnolo so shiny?

@OnRoadVintageBikes Жыл бұрын

Thanks for support. Disassemble, clean and polish all parts. I bought new cranks because the original ones were short, they were already polished and someone also sanded the anodizing, which is why they are unnaturally shiny.

@BerudPL Жыл бұрын

@OnRoad Vintage Bikes thx, do you have video showing that process?

@OnRoadVintageBikes Жыл бұрын

@@BerudPL kzfaq.info/get/bejne/hpp0eNWjzdWplXk.html

@ykcinasak Жыл бұрын

Nadhera chci se zeptat proc se zadni lankovody na strojich z teto doby pouzivaji bez buzirky ?

@OnRoadVintageBikes Жыл бұрын

Děkuji moc za podporu. Důvod nevím, ale tak to tehdy bylo. V sadách byl vždycky ten holej , pružnej bowden...

@naser_si Жыл бұрын

Dobrý den chtěl bych se vás zeptat kde berete galusky. Potřípadě jetli by bylo možné 1 pár odkoupit, taky mám PBWčka ale zpuchřelá a nedrží tlak a na internetu jich moc není, když už tak v bídném stavu.

@OnRoadVintageBikes Жыл бұрын

Dobrý den , všechny díly na stavby vintage kol sháním po celém světe po bazarech, ebay atd. Pár galusek jsem víceméně dostal od známých a zdroj na staré /nové Barum galusky nemám. Používám novodobé Vittoria strada z Decathlonu, vypadají dobově dobře. Děkuji za sledování videa.

@Vadim_Vorontsov Жыл бұрын

Какой размер рамы и сколько она весит?

@OnRoadVintageBikes Жыл бұрын

the frame is big, top frame tube 59cm CC, frame height is hard to measure. Weight is 2.15

@Vadim_Vorontsov Жыл бұрын

@@OnRoadVintageBikesСпасибо!

@jerrylee7737 Жыл бұрын

Pecky z doby ocelové asi nikoho moc zajímat nebudou. Přimlouval bych se spíš za kola z té doby...

@OnRoadVintageBikes Жыл бұрын

Kdo se podívá na obsah mého kanálu , snad pochopí co jsem asi myslel...Děkuji za sledování videa.

@jerrylee7737 Жыл бұрын

Omlouvám se, pokud to vyznělo nějak nepatřičně. Jsem už stará škola, na kole jezdím od roku 1959, v letech 1972-1983 jsem to zkoušel i závodně na silnici, a v té době se v souvislosti s koly nikdy o žádných peckách nemluvilo, možná mi ale něco uniklo, možná mě kluci z Dukly opraví. Jinak krásné video, pastva pro oči! Muselo to dát hodně práce natočit a ustříhat. Máte ponětí, z kterého roku tenhle krasavec pochází? Tipoval bych konec 80. let...