VINTAGE??? Or it just seems to be?

Рет қаралды 11,361

Tomislav Tomasic Woodturning (Dodir Drva)

7 ай бұрын

This bowl turn out so great and I really like the carving and already have a plan on making few to sell to my lovely customers....
What do you think?
Hope you'll enjoy
______________________________________________
AFFILIATE LINKS
KS SCHULTE WOODTURNING STORE
MIDI 2 PLUS LATHE
ksdrechselbedarf.idevaffiliat...
RAZOR EDGE BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
RAZOR EDGE SPINDLE GOUGE
ksdrechselbedarf.idevaffiliat...
KS BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
CROWN BOWL GOUGE
ksdrechselbedarf.idevaffiliat...
KS SPINDLE GOUGE
ksdrechselbedarf.idevaffiliat...
REVOLUTION TOOL ksdrechselbedarf.idevaffiliat...
REVOLUTION MIDI
ksdrechselbedarf.idevaffiliat...
STANDARD SCRAPER
ksdrechselbedarf.idevaffiliat...
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
______________________________________________
TELACK
www.telack.hr/shop/index.php?...
SANDING DISCS 75mm INDASA
www.telack.hr/shop/index.php?...
SANDING ROLLS INDASA
www.telack.hr/shop/index.php?...
Thank you very much for watching 🤗
______________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
______________________________________________
TELACK
www.telack.hr/shop/index.php?...
SANDING DISCS 75mm INDASA
www.telack.hr/shop/index.php?...
SANDING ROLLS INDASA
www.telack.hr/shop/index.php?...
Thank you very much for watching 🤗

Пікірлер: 74

@k9insomniac783 7 ай бұрын

Every time I seem to get burnt out from making the same things, you always give me new ideas that open up tons of opportunities. I appreciate your creativity

@tomislavtomasicwoodturning 7 ай бұрын

Really glad to hear that sir 😉

@Allan-loveswoodturning 2 ай бұрын

I love this ageing of the blue round the boul. This can be done by Turners of all levels fantastic piece.

@brianremington5780 3 ай бұрын

Absolutely beautiful Tomislav. And I love the grain of the pair, don't think it is unremarkable at all. I turn Beach which is very plain, warps a lot and high tendency to crack but it turns very nicely and easy to get smooth cuts.

@brianhawes3115 4 ай бұрын

One of the best bowls of yours I’ve seen, I’m binge watching your videos today, looking for inspiration and your rim detail has me and a few others thinking of embellishments for our turnings 😅

@tomislavtomasicwoodturning 4 ай бұрын

Thank you Bryan, appriciate the time you took to watch my videos 🤗

@Bunk599 6 ай бұрын

Many different skills used to produce a beautiful finished product. I generally do not like attempts to add post turning features but your technique is just a wonderful result....it's perfect. I suggest you find a way to burn those turning chips to heat your shop. I am cold just watching your video.

@tomislavtomasicwoodturning 6 ай бұрын

😅😅 I dry over 500 bowls in my shop so no heating allowed😉 thank you for kind words and support

@glennnord2605 7 ай бұрын

Thats a very nice job and I like the band around the top .

@tomislavtomasicwoodturning 7 ай бұрын

Thank you 😀

@geoffwoolfe7918 7 ай бұрын

Tomislav you have a superb eye for design and style and your turning technique is excellent. Thanks for producing these outstanding educational videos.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you very much,glad I could help out in any shape or form

@richardgeorge9750 5 ай бұрын

Magnificent piece; inspiring to watch!

@tomislavtomasicwoodturning 5 ай бұрын

Thank you ☺️

@gregdownunderinOz 7 ай бұрын

Well done tommi, I like the effect a lot. It doesn’t look too difficult to do, but it would still take me hours to do the first time. Great video welll described.thanks.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you Sir very much 😀

@brianroyle2533 5 ай бұрын

Really nice piece thank you

@9thousandfeet 7 ай бұрын

Nice. I've used milk paint in various ways on bowl and platter work for years, especially for enhancing carved textures and the like. A topcoat sanded back to reveal undercoat(s) of different colors can be very effective. I often use a Scotchbrite pad, or the equivalent abrasive non-woven pad, at various stages in the process of rubbing back to reveal the undercoat. Sometimes sandpaper is a little too aggressive and the pads also can nicely burnish the milk paint, especially in crevices where sanding cannot reach. Milk paint is great stuff. Tough as nails when fully cured, and because it comes as a powder you can mix just what you need and the shelf life is pretty much unlimited.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you sir for advice on scotch bride pad, I'll try that method as well.... Indeed its great stuff,I have several bowls in everyday use with milk paint and its as it was the day 1... Thank you for watching

@scottbeilsmith4261 7 ай бұрын

Very well done Tomislav. I really like your technique of carving the band. It adds a unique look to the piece. Going to have to try that. Thanks for sharing.

@tomislavtomasicwoodturning 7 ай бұрын

No problem, Thank You for watching 🤗

@MarklTucson 7 ай бұрын

That really turned out great. Really like the carving and milk paint; that just stands out nicely.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you, I like that too 😀

@davidmorgan7522 7 ай бұрын

Beautiful bowl Tomislav! The embellishment is VERY COOL! Thanks for sharing. Take care, Dave

@tomislavtomasicwoodturning 7 ай бұрын

Thank you Dave,glad you liked it

@DougMilleratWoodSpunRound 7 ай бұрын

Nicely done.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you

@woodbutcherjc 7 ай бұрын

Wonderful work. You and Mr. Richard are my favorite turners to watch. I’m learning much from ya’ll. What chuck and jaws are you using? Thanks you so much for the time and effort. It is appreciated.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you, so glad you enjoy our work.... I use vicmark chucks and jaws, one is 40mm shark jaws I believe and bigger ones are 100mm.... Also have one jaws 50mm...hope that helpes

@alansmith477 7 ай бұрын

Great piece, thanks for showing a scrapper technique I have never seen.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you very much 🤗

@DancingFox6 7 ай бұрын

I wish I could ‘Like’ your videos more than once. ❤

@tomislavtomasicwoodturning 7 ай бұрын

Thank you very much, once is ok😉

@archiehebron8944 7 ай бұрын

I like how it mimics a live edge. Very nice work, sir.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you very much 🤗

@jorisdemoel3821 7 ай бұрын

That is a very nice looking bowl. A bit more figure in that pear than I'm used to. Thanks for a demonstration of yet more technique.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you ☺️ I wasn't expecting a lovely grain like this as well , but turns out to be quite nice

@cudamank 7 ай бұрын

Nice work. Like the idea of adding the carving and paint techniques

@tomislavtomasicwoodturning 7 ай бұрын

I always like that as well... Thank you for watching

@curth.1500 7 ай бұрын

The embellishment looks great. What do you think about doing the same thing but recessed so the carved surface stays within the bowl curve instead of proud? I learn so much from your videos. Heartfelt thanks!

@tomislavtomasicwoodturning 7 ай бұрын

Thank you for watching and comment, well I think whenever you make something like this it will be ok, the key is to know when to stop, to me almost every carving looks awsome

@ianbedwell4871 7 ай бұрын

Interesting technique, thank you for another great video. A crackling finish would work well maybe, will give that a go.

@tomislavtomasicwoodturning 7 ай бұрын

Go for it 😀 thank you for watching

@ned711 7 ай бұрын

Very nice work. I suggest instead of bright cool colors like blue and yellow, try using warmer tones like burgundy, dark oranges and dark greens.

@tomislavtomasicwoodturning 7 ай бұрын

Will do... thank you for suggestion

@vidarreiersen4820 6 ай бұрын

very nise

@tomislavtomasicwoodturning 6 ай бұрын

Thank you

@marcplon4396 7 ай бұрын

Très joli résultat ! l'effet ancien est parfaitement réusi ! bravo

@tomislavtomasicwoodturning 7 ай бұрын

Thank you very much 🤗

@jackthompson5092 7 ай бұрын

Beautiful Tomislav.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you sir

@markchoitz443 7 ай бұрын

very neat idea and well done. thanks.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you 😀

@fredericrg2984 7 ай бұрын

Magnifique réalisation J’adore.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you ☺️

@alanneel2749 7 ай бұрын

The boss says she really likes this so I will be copying you!! I really enjoy your channel!!

@tomislavtomasicwoodturning 7 ай бұрын

Glad to hear that, let me know how it goes 🤗

@michaelogden5958 7 ай бұрын

Very nice!

@tomislavtomasicwoodturning 7 ай бұрын

Thanks 😀

@felocarp 7 ай бұрын

Beautifully done, Tomislav! I think you will have fun doing these going forward. Thanks!

@tomislavtomasicwoodturning 7 ай бұрын

Thank you sir...I do too😀

@joehimes9898 7 ай бұрын

Wow.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you

@Amybaumgart 7 ай бұрын

What grit sandpaper did you use to do the distressing part? Your videos are great!!

@tomislavtomasicwoodturning 7 ай бұрын

Thank you very much 🤗 it was 240grit but you can use scotch bride pad, or pretty much anything....all those can sometimes leave different finish...

@geofftidy8745 7 ай бұрын

Great bowl. Could you please tell me the make of your spear point scraper. Many thanks.

@tomislavtomasicwoodturning 7 ай бұрын

Thank you, its from crown tools, I believe its there cryogenic line

@geofftidy8745 7 ай бұрын

Thanks for your prompt reply. I have searched the Crown site but only find it available in theirM2 HSS (261xw)range and it seems only in American stockists. I am in France.

@tomislavtomasicwoodturning 7 ай бұрын

@@geofftidy8745 I would go with m2, there is little differents between the two... There is ks schulte in Germany and type vicmark dealers in Europe and you'll find a woodturning store in France that sell I believe crown tools.... But most other like KS or neurother in Austria sell to France... Most of scrapers and good enough for our work are M2 so you are ok with that 😉