Vinyl Application Table Build

Рет қаралды 19,614

Жыл бұрын

If you missed my first video discussing my need for a vinyl application table, you may want to check that out here:
• Decided to Make a Viny...
63" Cold Laminator:
amzn.to/3Tm4dxk
Linear Rails with Bearings:
amzn.to/3gpD2mO
Mobile Heavy-Duty Packing Tables:
www.uline.com/BL_3462/Mobile-...

Пікірлер: 41

@grewalzz8 5 ай бұрын

What a great guy, thanks for showing how it’s done

@smalltownink 3 ай бұрын

No problem 👍

@markl7520 Жыл бұрын

this is a nice table, great build.

@trunkz007 Жыл бұрын

i have that laminator setup like you do. i recently built a 6x12 foot table. and i want to utilize the laminator on the table. it will for sure make life easier

@jaredtherrien4676 Жыл бұрын

We have considered building a table like this for over a year now, using an old laminator we have and the base of an old Vacuseal vacuum mounting table (roughly 5'x10'). So glad to see others braver than us gave it a shot, and it worked! Thank you so much for sharing - we will surely be giving it a shot when we have some time in the coming slow months.

@smalltownink Жыл бұрын

Your table sounds like the perfect size. Good luck!

@DominikNyga Жыл бұрын

Nice to see that idea in my head its real:)) greate work! I'll do my own table 160x500 :)

@TheCbg56 Жыл бұрын

Great job on the table! Fellow NC'er checking it out!

@smalltownink Жыл бұрын

Awesome, where in NC?

@contactdioda Жыл бұрын

Good job . Greeting from morocco 🇲🇦

@jorgecherniak6223 10 ай бұрын

Excellent!

@miketheprintman Жыл бұрын

It came out looking good. Frankenstein or not, as long as it works, that's what counts. Some times you have to McGuyver things together. Nice job.

@trunkz007 Жыл бұрын

i agree. there are steel laminating tables out there but i feel they are way over priced. way cheaper to just build one. be it you have lot of jobs or not. like you said as long as it works. i have that same laminator parts he using. i have had that idea for a while now. i just need to get to it now

@jrmunroe4024 Жыл бұрын

thank you

@SubieSteveo88 Жыл бұрын

Damn!!! I wish I knew this I just had my girlfriends aunt and uncle come here today from South Carolina to ny where I live and would have seen if they could have stopped along the way and grabbed the tracks I am looking to build a table and in need like weeks ago!

@smalltownink Жыл бұрын

I still have them!

@davoland1926 Жыл бұрын

I’m just seeing your video and I want to thank you for it!!! EXTREMELY helpful!! Dumb question, where by chance did you order the tracks from or do you still have to extra 2?

@pagphotosdesigns7749 Жыл бұрын

Nicely done Wanted to build one for a couple weeks now for facemounting photo prints onto acrylic as my 34 inch table top DryTac laminator just not doing the job as good as I will like plus am getting more and more requests for lager application. I do have also a manual 50 inch laminator as the one used in the video and was wondering about doing something low budget. Thank you for the Amazon link for the tracks. Now I’ll be building both a rollover table and a track saw

@smalltownink Жыл бұрын

Track saw….hmmmm, now I know what to do with my extra tracks! Thanks!

@anthonygreaves4998 Жыл бұрын

If you decide to build the track saw, post a video. I’ve built one a year ago using two long angle steel with two 1/2 round steel for the track and two small pipe for the bearings. It worked fairly okay for rough cuts. The concept I was missing those tracks and bearings that you are using

@jesianegomes4359 11 ай бұрын

What material this table roller is made ?

@CLTGeek Жыл бұрын

I would make you a vinyl decal for the top that says "Frankenbench" but you can print your own! :D

@smalltownink Жыл бұрын

Okay, way better name....Frankenbench it is.

@mertkadirsezer 11 ай бұрын

What if the roller is not covered with rubber?

@SubieSteveo88 Жыл бұрын

Hey do you use your table and roller when laminating to a 2ft x 4ft print or do you use a laminator?

@smalltownink Жыл бұрын

We have a 65” Royal Sovereign for our roll material. We use this table for applying to rigid substrates.

@rickday4702 4 ай бұрын

So my son and I made one of these based on yours. How tight do you run the roller down? Is just the weight of the roller enough? Any help is appreciated

@smalltownink 3 ай бұрын

I think the weight is good enough in most scenarios. A little bit of extra bracing would probably help a lot with sway.

@inkspotprintinganddesignbu1658 Жыл бұрын

Where do you get the bearings for the tech?

@smalltownink Жыл бұрын

Link is in the description. Good luck!

@tammycrews2916 Жыл бұрын

Where do you get the piece to put on the top of the table! My husband is making me one and I got all the stuff I need except for that!

@smalltownink Жыл бұрын

Are you talking about the white board that is on top? I just used a piece of 3mm ACM 5x10 that my sign supplier hot shots to me.

@smalltownink Жыл бұрын

I am in North Carolina but my sign supplier is Sunbelt Sign Supply.

@tammycrews2916 Жыл бұрын

Thank you very much - yes that is what I was talking about will check with my supplier. I am from MA. Love your videos I have learned a lot since I am still pretty new at this.

@smalltownink Жыл бұрын

@@tammycrews2916 my channel is great for learning from another’s mistakes. 🤣 Appreciate you following along!