Vinyl Wrap A Front Bumper With Inlays

No video

Vinyl Wrap A Front Bumper With Inlays | Subaru STI

Рет қаралды 110,529

Күн бұрын

Check out the products here on Amazon:
bit.ly/VViViDGl...
bit.ly/VViViDTe...
bit.ly/VViViDLi...
A lot of work went into wrapping this front bumoer, and this Subaru STI front bumper isn't even the hard one to wrap.
www.ckwraps.com/
Get Certified Visit www.vvividhq.c...
Instagram @ckwraps @newconceptautosalon

Пікірлер: 63

@cRashtEstDumy8 6 жыл бұрын

Amazing job CK! Not going to judge you on being tired and it just shows that you are human, working hard, yet still getting the job done! Thanks for the great videos and being there to show us how it's done. Not a lot of wrappers talk through it the way you do, its things like that where I feel like I'm actually learning something.

@neonnerd1364 2 жыл бұрын

Your videos are a godsend. I recently decided to try my hand at wrapping and I've been using your videos to learn and they've helped tremendously.

@BaileeGermanotta 5 жыл бұрын

“As you get close to the end I recommend doing what I just did there” *no explanation* LOL I’m sorry you’re so tired, you did excellent work on the subie and I’m loving going through these videos. Keep them coming!

@badmrfrosty1356 6 жыл бұрын

Very nice job dude. Attention to detail the entire time.

@OneEyedWilly5150 6 жыл бұрын

Bad MrFrosty that’s the kind of work actually expected anytime but for sure not for a cheap wrap ahHahaha, great damn job man, teach me ! Haha in the IE: where ya at ?

@Roadsurfer2k11 4 жыл бұрын

You know when CK is exhausted when he doesn't fold the vinyl backing 😁

@JohnSmith-hw6xc 4 жыл бұрын

Amazing job ck I'm wrapping my legacy and you make it look easier then it is. Thanks for the time to show us.

@ARomanRacing 6 жыл бұрын

you definitely sound burnt! thanks for this. I am planning of wrapping my STI bumper and was not sure where I should do inlays. Thanks again buddy.

@1389Mxer 6 жыл бұрын

Would you make a video showing how you layout a directional wrap on a car, that's something I haven't seen before on KZfaq. Doing a great job even with being tired.

@rodneymartin9802 4 ай бұрын

He’s a professional. Great job

@lummy321 5 жыл бұрын

Pheonominal work Christian ... Lord bless you brother ... Peace

@nadimadatia 6 жыл бұрын

Watching you do this front bumper helped me appreciate why I will pay someone to do this job for me! Vinyl Artist.

@Morgatron_ Жыл бұрын

You created so much more work with that first step of taking the backing off and stretching it the way you did. You don’t need to heat for the first step if you lay it from the center, out. But heating first to then stretch to glass over, stretch’s it too much. You can cold lay it first and THEN heat to glass it out. Way less material stretching.

@chrish4640 Жыл бұрын

Nardo grey by vivid is super hard compared to other wraps good job bro super frustrating but your a champ

@neepathius7 9 ай бұрын

thx for taking the time to teach us this man 🤝

@alexandermilosevic_ 6 жыл бұрын

You're a sorcerer with this stuff, nice work!

@carlosmalagon3849 27 күн бұрын

Great video. I have a question? Can you use the same technique on the bumpers using 3M controltac print film 40C laminated?

@karlpoglitsch1087 6 жыл бұрын

Thank you for these! Much appreciated...

@artjomsacharow4188 6 жыл бұрын

Why not take that worst ringtone in the world to the camera if it's going out of charge 😉😂😂 but again, it's a wonderful job you did. 👍👍👍👍👍 Can't even wait for the delivery of my "Avery Dennison Satin Urban Jungle" to start wrapping my own car 😋😋😂😂

@torellecarter1001 6 ай бұрын

curious how you would do this same job now, i feel like this is a lot of heat and stretching compared to what you do now. would you still come at this bumper the same way?

@forg0tin397 3 жыл бұрын

Would it have been easier to remove the tow hook wrap the bumper then install the tow hook?

@consumerthis3169 3 жыл бұрын

Man I can’t stop looking at that tow hook hole, driving me crazy

@FlashTheEagle 6 жыл бұрын

at what point is it considered overstretching? in this, the spoiler and the boot/trunk video you seem to stretch the film quite a bit.

@nuraleef410 6 жыл бұрын

hahahahaa. i definitely understand the feeling. all the hardest and best part to wrap. then theres the JD part.

@consumerthis3169 3 жыл бұрын

Subaru , take notes, this is the shit we want

@ronjlwhite8058 6 жыл бұрын

Lookin sweet AF!!!

@sesshoumarunagyur 3 жыл бұрын

it is not could be easier to remove the whole grill out of the way? I would like try to wrapping my subaru too that's why I am asking! bw your videos helping me a lot to understand to working with the vinyl! thank you!

@NkateDogg 5 ай бұрын

WOW THANKS

@felixlugo9109 6 жыл бұрын

Great job as always

@jonasgrumby1093 6 жыл бұрын

Nice job

@Ac19885 Жыл бұрын

Hey, Bro! Can you tell me about the inlines, i have problems with the edge. I'm always short, and i see the car color. i think I'm cutting too much or the inlines are not long enough on the interior side. please let me know. Peace out!

@derickponce-sanchez772 6 жыл бұрын

Are you running on fumes because there is more time consuming work than expected? I have been doing LED installs for friends and trying to keep good quality just takes way longer than the time and money I quote them.

@sonhuynh8222 2 жыл бұрын

Looks great ! Just curious…. Sometimes bumper removal is preferred or preference ? Ur thoughts ?

@josecolumna8575 3 жыл бұрын

Fantastic artist you are great 👍

@TheMikeboyz 4 жыл бұрын

Nice job. I'm wrapping a nissan Juke front and rear bumper. What's your advice for wrapping circle head lights?

@Reveqable 6 жыл бұрын

amazing work :o

@Ethan-fr4jy 2 жыл бұрын

how do you stretch so much without stretch marks

@tomaz2312 4 жыл бұрын

Question. I want to wrap my sti. I have scratches dents and chips. I will get it paint corrected but the paint wont be perfect. Will the wrap look like shit because of rock chips and a few other imperfections?

@emory7467 6 жыл бұрын

do you ever use 2 layers on front bumpers or hoods to help mask rock chips? ive done a few in vvivid matte and it seems to chip easilly and they stick out like a sore thumb.

@davidwright4363 5 жыл бұрын

Hey CK you have been inspiring me to give this a go on my 2009 WRX. How do I work how much vinyl I need to order for the whole car?

@sn0w55 5 жыл бұрын

David Wright Length of car x3, add an extra 5-15’ for bumpers, and round up to closest film size!

@dannykim1462 Жыл бұрын

Where can I get this wrap/color

@dennisracer6441 3 жыл бұрын

You are cool man

@brianmogle1121 2 жыл бұрын

Why did you choose to NOT remove the bumper cover and wrap around the edges where it meets the fender?

@GOLD_FEVER 2 жыл бұрын

have you tried wrapping a piece that is not attached to the car? it's HARD to wrap without having something holding the piece back while you pull on it... It is very awkward having to put on the film and then when you pull on it it just moves towards you. THat is why he leaves it on the car so that he can actually put it on... However he DID remove the lights and other pieces that go in the bumper to get better coverage.

@brianmogle1121 2 жыл бұрын

@@GOLD_FEVER Yes, I have, a lot. That's why you loosen the bolts and hardware that connects it to the car. You then wrap as normal, then remove it and wrap around the edges! Not hard.

@xanthony1919x 5 жыл бұрын

CK do you think I would need to do the same inlays on a 13 civic si next to the headlights?

@confessionsofthedoodle 6 жыл бұрын

damn looks nice!

@cassiejvance7496 5 жыл бұрын

Still on catch up with your videos. Great wrap again, but how glad are you that those annoying idiots in the back ground are gone. 💯💯💯

@hankgs 6 жыл бұрын

Looks great! Just wondering why you wouldn't pop off the front grille ...?

@CKWraps 6 жыл бұрын

I did but put it back on after the carbon fiber was done. No need to have it out after that

@thefishingreel1449 4 жыл бұрын

Really excellent but that compressor noise in the background has to go. Good job.

@thuggwafflezz9721 4 жыл бұрын

What does adding the inlay do?

@brianboylan9932 5 жыл бұрын

Who the heck “unlikes” a video like this..? Lol haters

@EPIKjdm 4 жыл бұрын

i need a shot LOLLLLLL someone bring me one. fuck i died LOLLL

@souissinourdine7743 2 жыл бұрын

😍😍♥️♥️

@W333dm4n 3 жыл бұрын

10 dislikes are from wraptors

@StardustAutomotive 2 ай бұрын

I love how this guy sounds like Tom Brady.

@williampietraszewski4140 6 жыл бұрын

Always interesting to see how stress effects ppl. You're attitude is night and day difference compared to most of your other videos. Just seeing how much more little things frustrate you, like a wrinkle, or even your "annoying ring tone". Prob wasnt best time to record a video. Was much less enjoyable to watch seeing how bothered you were by everything. Hope things smooth out for you either way. Solid work