I like watching the CK Wraps videos not because I want to do wrapping or want to be the uneducated critical reviewer. I watch them because all of you treat this like a piece of art, doing and redoing until you reach your own state of expected perfection in the job at hand. How you do this by meticulous attention to detail is worthy of a Six Sigma mentality that is not often found in manual arts. Good enough is often given to the customer and as you have found customers often can't tell they paid more for a bad wrap job than they would have gotten from a reputable wrapper. When all the elements involved in a car wrap come together from quality product manufacturing to quality installation it can only lead to ultimate customer pride in a beautifully done car. Thanks for sharing and a big thumbs up!
@vincephan3446 жыл бұрын
Most intuitive wrapping channel no doubt, and this guy is a perfectionist. I got the courage to wrap my own vehicles after watching his tutorials.
@roughryder53 жыл бұрын
Did you end up wrapping your car?
@christianbafia34916 жыл бұрын
As I am currently struggling with my 2008 STI hatch wrap, this comes into my life. lol Thanks dude, just in the nick of time :)
@OneIslamVideos6 жыл бұрын
You can see how passionate he is about his work. After watching a lot of his videos, i think i could wrap my car. Your tutorials are so enjoyable to watch! Keep up’the good work.
@wrathofyourmom6 жыл бұрын
With those rust specs you are referring to, companies make sprays called "iron and fallout removers", specifically CarPro IronX, they will dissolve those specs after about 5 minutes of dwelling. I'm an amateur detailer and use it all the time in conjunction with clay. I think a lot of the companies work with businesses for wholesale too. Love the content.
@heyaisdabomb2 жыл бұрын
I did my subaru in the same material and I did a wash followed by ironX, follow by another wash, followed by clay bar, and finally, another wash. Only issue I had was dust nibs, but it's hard if you don't have a super clean space to work in. The ironX is crazy to watch. You really see the Iron melt away and the paint is so much better looking. Only rewatching now as I'm about to do my first rewrap (the UV is brutal. Didn't know you needed to protect the wrap or it'll get damaged within about a year.)
@06wrxdude4 жыл бұрын
So much inspiration! I’m wrapping my own car because of you and all of your awesome videos. Only have bumpers left and I’m feeling confident after watching this for sure! Thanks 🙏 CK WRAPS! I even made a vinyl wrapping series on my channel. 😎👍
@scottgillig9085 жыл бұрын
Christian.....excellent wrap on that back bumper. Also, I was at Home Depot last Fall, and I found something called a cord foiler. Foil as in stopping. It would be where instead of plugging your heat gun straight into your extension cord, you would plug it first into the cord foiler. then into your extension cord. It will never let your extension cord bunch up int those tight knots. Worth it's weight in gold. I should have bough ten of them and I didn't. They work great. You can find them in the aisle with extension cords. You'll love them. P.S. I sure don't see ant more Subaru TSi's here any more. They were very quick. The only thing I didn't like was the spoiler on the back. It tended to block more than I cared for when looking in the rear view mirror. My best, Scott
@mrfumetsu6 жыл бұрын
About to tackle this same bumper tomorrow. Thanks for all the videos and tips. Great work.
@DarkOkami76 жыл бұрын
Wish I lived closer to you guys do an amazing job!!!
@klassik27526 жыл бұрын
I’ve been wanting to do my wrx in nardo grey for awhile! Can’t wait to see what it looks like!
@thebeaststi43004 жыл бұрын
Always great videos and amazing work! You make it look so easy!
@33foose6 жыл бұрын
Nice CK I have been running inlays with those problematic Subaru's rear bumpers. Not anymore great tip and how to. Keep it up!!!!!
@heyaisdabomb2 жыл бұрын
I still struggled to do mine. The 5th gen bumpers have a deeper recession, and nothing I could do would let me stretch it in without it pulling back in those corners. So I did an inlay. temped to try it as one piece again as I feel my skills are much better now. But it's still way more stretch then the 4th gen wrx bumper.
@Danything123Ай бұрын
Love the guy attitudes
@mrwrolguy17176 жыл бұрын
Love the channel.. You do a awesome job. Love the videos.
@markarbuckle83936 жыл бұрын
Can a Subaru WRX limited be wrapped in 2 days?
@drphil5674 жыл бұрын
Absolutely. I wrap my 2014 sti limited in 2 days. It's a lot of work though.
@icesecurity6 жыл бұрын
Wow we , one after the other , your killing me , I can't get any work done , wrapping comes first before anything else :)
@tonyhella14926 жыл бұрын
Great work!!! Did not even realize this video was an hour long until it was over. How much vinyl do you estimate to be used for this car?
@HolyTotemic6 жыл бұрын
You should provide purchase links to the tools you use in each video!
@mohdnurulaman55743 жыл бұрын
Falling love with yellow car..can u share name that yellow wrap..is it hornet yellow satin?
@KoLuX573 жыл бұрын
What temperature do you heat the foils with? I have a heat gun steinel HL 2020 E, will it be suitable for such works?
@rboyett5 жыл бұрын
Wouldn’t it be easier to wrap the middle part that goes in as it’s own piece?
@nickrousch80554 ай бұрын
Does it peel where the knifeless tape was
@1989rrichard5 жыл бұрын
Why do u use the vivid? I don’t it very hard to work with that wrap
@Bader.mobarak6 жыл бұрын
can you give a tour of the final product once you're done?
@CKWraps6 жыл бұрын
Definitely will
@richm79366 жыл бұрын
Is there any benefit to using seam sealer around the edges of the bumper that are exposed to the elements?
@Dc5_henry5 жыл бұрын
Rich M lol why wouldn’t there be a benefit wtf
@HockeyLAKings1196 жыл бұрын
Why do you wear a glove sometimes? Also, what type of glove is it?
@alvaradoc142 жыл бұрын
Name of the color wrap your using?
@12half586 жыл бұрын
SO many questions about the yellow car in the background!?
@CKWraps6 жыл бұрын
Brand new Mercedes E63 being wrapped in CYS pearl metal yellow
@danielhardin90473 жыл бұрын
How much vinyl did you use for that?
@twicepast76 жыл бұрын
Most important question in the comment section: what shoes are you wearing? lol
@CKWraps6 жыл бұрын
Airwalk 😂
@twicepast76 жыл бұрын
Thanks! My high tops are falling apart and I can't find replacements I like.
@mrfumetsu4 жыл бұрын
how is this one holdin up?
@LVTHORAscending5 жыл бұрын
Design Line sucks ass. Always breaks before you even get to the edges of the film.