Virtual Pinball: how to install under cabinet and speaker grill addressable leds!
Рет қаралды 8,966
Жыл бұрынEpisode#28 Custom Virtual Pinball Cabinet Build
This is a part 2 of Episode #27 where we started installing the addressable leds for the matrix and side playfield strips.
In this video I will be continuing to show you how to add addressable leds lighting for your under cabinet, behind the back box, and in your speaker grills. As usual, this video will have a ton of tips and tricks to get your custom virtual pinball looking absolutely amazing! This stuff seems crazy hard but is actually pretty simple once you have a walkthrough like this. Fear not! I got you!
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Inline fuse holders amzn.to/3Y5ZkLa
Terminal Blocks amzn.to/3Rq3Dig
USB Extension amzn.to/3HLPZT6
Fork Spade Terminals amzn.to/3jn7qQw
18 Gauge Red/Black wire amzn.to/3HrLITw
PC board mounting feet amzn.to/3WY03g4
Magnetic door catch amzn.to/3l4L3ji
Tinted led diffuser amzn.to/3WW6oc6
JST wire kit amzn.to/40ljHpg
LED Matrix 8 x 32 amzn.to/3XVZk0r
Addressable LED strip 144/M amzn.to/3wPorWO
Addressable LED strip 60/M in a 16.4 feet roll amzn.to/3Rxjrje
Label maker amzn.to/3XYiVNp
Canon M50 camera amzn.to/3x53c3v
Canon M50 AC adapter amzn.to/3JTaMpe
Canon lense filters/protective covers amzn.to/3HO6fBQ
Rode Wireless Go 2 amzn.to/46eIzl2
Smart Phone tripod with cold shoe mount amzn.to/3RSQUEP
GoPro suction cup mount amzn.to/3DSQHvJ
GoPro head strap and quick clip amzn.to/3RMXxIB
GoPro Media Mod amzn.to/3YESM6r
GoPro Light Mod amzn.to/3YfQsml
GoPro Chest Mount amzn.to/3HFlvAU
GoPro Dual battery charger and battery amzn.to/3DV0xNA
If you would like to make my vpin cabinet, here is a link to the free plans!
sdssautomotive.wordpress.com/...
If you design your own, I'd love to see it! Send pics/video to my DM on Instagram!
Special thanks to Michael Roberts for his amazing guide on how to make a vpin cabinet, check it out here. Thanks for the amazing pictures that really help people understand the assembly process.
mjrnet.org/pinscape/BuildGuide...
Copyright ©2016-2021 Michael J. Roberts.
This book is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. In brief, this means that you're free to use, share, and adapt this work for any purpose, without seeking further permission from the author, as long as you give appropriate credit and pass along the same permissions in your adapted material.
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at / way_of_the_wrench
If you enjoyed the video, learned some cool tech tips, I would appreciate it if you could share out the channel on your social media so I can help more people! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Music for this very special episode by :
Synthwave C - Royalty Free Music
• Synthwave C - Royalty ...
License: Creative Commons Attribution 3.0 - bit.ly/RFP_CClicense
Nihilore - The Water and the Well: • Nihilore - The Water a...
The End by EVA
/ home-2001
Promoted by @RoyaltyFreePlanet - royaltyfreeplanet.com
Creative Commons Attribution-ShareAlike 3.0
bit.ly/RFP_CCSAlicense
Thanks to Teknoaxe for his royalty free music for our intro/outro music. Please check out all of Teknoaxe's sweet music tracks!
www.teknoaxe.com
Intro music is Synthwave D
www.youtube.com/watch?v=WNDvO...
Outro music is Sythwave E
www.youtube.com/watch?v=RBxnY...
Disclaimer: These videos are intended for entertainment and inspiration. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe.
@Felklaw 11 ай бұрын
I love the beauty of how well designed this project has begun that it's taking such minimal "tweaks" as expanding and upgrading to keep it meeting your initial vision. Brilliant work, and I plan to follow along for my build since your workmanship and attention to detail are exemplary.
@wayofthewrench 11 ай бұрын
Thank you for your kind words! Yeah I'm pretty happy with how this vpin is turning out too. I'm a bit of a perfectionist so the vpin and the video series is taking a while to complete, thanks for hanging in there. I've got a bunch of videos coming out to finish off the budget build and then it's time for upgrades!!!! Thanks for the watch and if you deem me worthy I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!
@danw3735 Жыл бұрын
So clean!! I started off clean then just got impatient and stuffed wires in the first time around. Then went back months later and rebuilt it all cleaner. Lesson learnt to do it right the first time like this master builder :D
@wayofthewrench Жыл бұрын
Thanks Dan! Yeah I'm trying to keep it clean as I go plus when I tear it all down I'll put it back together with wire looms and cable brackets to tidy it up even further. Make it ultra clean..... Thanks for the watch Dan!
@Hidyman Жыл бұрын
Pro Tip: You don't have to cut the connectors off, if you look you will see a very small springy piece of metal on the side (not the end) of connector for each pin, you can use a very small implement to gently push that metal down and slide the pin out. Do this for all of the wires and you will be able to fit them through the hole. After feeding the wires through you can just push the pins back into the connector and you are done. Don't push too hard when removing or you will flatten the little metal retainer, if you do that all is not lost, you can use an exact-o knife or jewelers screwdriver to gently pry them up a little bit so that the will retain the pin after you push it in.
@wayofthewrench Жыл бұрын
Cool tip! I always forget about these kinda things. Thanks for the watch!
@crennyw 7 ай бұрын
Brand new to me. Lots to learn here. I'll watch again. Love LED's. Becoming a zen master will take some time. Well done video, thanks!
@wayofthewrench 7 ай бұрын
Glad you enjoyed the video! Yeah there's lots to learn in these videos. Hopefully I earned your subscription today! Thanks for the watch!
@MandoMike Жыл бұрын
Gotta love the smell of solder in the morning. Great video as always!
@wayofthewrench Жыл бұрын
Yup, I actually really like soldering...and the smell....lol
@MandoMike Жыл бұрын
@@wayofthewrench So here's a question. Instead of using an Arduino, is there PC software that can be used for DoF and maybe make LED lighting faster? Since it's PC powered? Seems the Arduino is very limited on processing power.
@wayofthewrench Жыл бұрын
Ya know, we are already running the arduino.ide on our pcs, it seems like the harder part is connecting the led strips to the pc. I bet there is already programs/boards out there that already do this for big art installations, but I bet they are more expensive and not free. It's a great idea and there's probably someone out there smarter than me to figure it out. Thanks for the suggestion!
@MandoMike Жыл бұрын
@@wayofthewrench the latest motherboards have ARGB controllers right on the motherboard itself it's a matter of DoF devs to utilize that and integrate a way into their software. Worth a shot.
@wayofthewrench Жыл бұрын
Yeah that would be cool! I'll have to look into that a bit. Cheers!
@jacooosthuizen3593 Жыл бұрын
Beautifully done!
@wayofthewrench Жыл бұрын
Thank you very much! Just wait to see the final version with DOF controlled lighting! Thanks for the watch!
@Stephman-YouTube Жыл бұрын
You da man!!! All your vids are much appreciated!
@wayofthewrench Жыл бұрын
Thanks dude! Glad you're lovin' the content!
@drdave5150 Жыл бұрын
I so enjoy your videos!
@wayofthewrench Жыл бұрын
Thanks dude! Glad your enjoying the content! Maybe you could help spread the word about my channel for me? Cheers!
@MrPhilip201 Жыл бұрын
Again, great work! So many LEDs. I love it. 😍
@wayofthewrench Жыл бұрын
Right?? 1,111 glorious leds to blind your friends while they try to keep the ball from draining.....thanks for the watch!
@garybroomfield5416 Жыл бұрын
I do like your meticulous work style and the cabinet is looking great ! 😀
@wayofthewrench Жыл бұрын
Thank you Gary! Yeah it's turning out nice and now it's time for all the cool final touches. Thanks for the watch!
@brodzowski Жыл бұрын
Fantastic as usual. I bought those same strip holders. I got the 90 degree half moon ones first because I thought I was smart - I wasn't, lol. Looking forward to the DOF setup! As always - thank you!
@wayofthewrench Жыл бұрын
Thanks Brandon! I just about bought those, what didn't you like about them? Too much glare on screen?
@brodzowski Жыл бұрын
They weren't wide enough for the strip to lay flat so it would have layed in at an angle. The biggest reason though is I'm going to use the edge of the strips you have to lay my glass on. The strips will face inward instead of up like yours. Hopefully it's got enough "hip" to support the glass with something soft sandwiched between - felt etc.
@wayofthewrench Жыл бұрын
I'd do a test of that idea as the light flashing on the playfield might cause glare issues. If it works, I'd love to see how that looks. Cheers!
@kdstyles1979 Жыл бұрын
as always youre the man 😎
@wayofthewrench Жыл бұрын
Cheers Kory! Gotta love that glow eh?
@kdstyles1979 Жыл бұрын
@@wayofthewrench so very much. you just gave me an idea for my LEDs. thank you
@wayofthewrench Жыл бұрын
Cool, what was the idea?
@Leroys_Stuff Жыл бұрын
Dang that looks good
@wayofthewrench Жыл бұрын
Thanks Bruh! Just wait till I get DOF installed!
@Leroys_Stuff Жыл бұрын
@@wayofthewrench that’s gonna be awesome but hell I’m excited for when you paint it
@wayofthewrench Жыл бұрын
Me too Leroy!
@CuddaBrown Жыл бұрын
Dope..
@wayofthewrench Жыл бұрын
Pretty cool huh?
@curtluther6214 8 ай бұрын
Thanks for all your help! So do you recommend having two 5v power supplies? I have one for my led buttons do I need a separate one for Addressable LEDs?
@wayofthewrench 8 ай бұрын
You can have one but you will have to calculate how much amperage all your LEDs and buttons will use. Then use a ps that will handle that. Or get 2 and split it up
@brentslane1 2 ай бұрын
Hello! great video! So I'm about to start a rebuild of my Vpin and I'm to add 4 addressable LED panels from Cleveland Software. My question is, with the current POVs would you recommend putting the LED panels under the glass and have the monitor tilted down in the back or put the LED panels on the backbox and keep the monitor flush with the glass? It's a mini vpin (Haunted House ToyShock gutted and PC added running Pinup Popper). Thanks for your advice!
@wayofthewrench 2 ай бұрын
Thanks, glad you enjoyed the video! I actually haven't played with the new pov too much but putting the matrix on the back box seems weird to me....like it's too high or the backbox monitors will be pushed too high. I would be tempted to still put the matrix the same way as I did before. Hope that helps. Thanks for the watch!
@markg9533 Жыл бұрын
General lighting question for under and behind cab. Is a track and diffuser needed? Was going to try addressable out but due to cab design they could stick out so wondered if track/diffuser optional there as you aren’t looking at them directly?
@wayofthewrench Жыл бұрын
They are definitely not needed but make it really easy to mount and keep safe. You could just stick them to the cabinet but be warned, they don't stick that well....they will sag/fall off so you will need to glue gun them or something else. I have seen people router out a groove to put them into as well. Cheers!
@storborg 6 ай бұрын
I've been following your series and I'm ready to install LED's. I just tested them and I'm ready to start cutting and soldering them to length. I've purchased a new soldering iron from a big box store, it's just a plugin style, no temp control which heats up to 975 F degrees. The problem I am having is that I am unable to tin the tip. The solder melts and rolls off the tip, it doesn't stick to the iron like yours does in the video. I have cleaned the tip with a wet sponge as you and others suggest. I am using an electrical solder (lead free rosin core), so additional flux should not needed. I even purchased a second iron and solder from a different box store and I'm getting the same results. Clearly it's me, but I have no idea what to change. Thoughts?
@wayofthewrench 6 ай бұрын
Sounds like one of two things. Too hot or wrong solder. should be around 350-375 F for temperature so make sure you have an adjustable one meant for electronics not plumbing. Also make sure you have rosin core electronics solder (I use one with lead in it as it flows better). Good luck on you soldering and led install! Enjoy the series!
@shawnquick01 Жыл бұрын
I very much appreciate you taking an enormous amount of time to show us exactly how to get the LEDs installed. In fact, your video zooming technique is phenomenal! It made the Teensy actually looked big enough to handle no problem!. I have one question and I may be getting ahead of your stepping us through the setup - when you uploaded the Arduino sketch into the Teensy to test your different LED sets, you had to update the specific LED numbers in the sketch and re-upload into the Teensy. How do you set-up the Teensy file at the very end to accommodate all of the various LED strips? Thanks and I dig your thoroughness!
@shawnquick01 Жыл бұрын
I did get ahead of myself! You answered that question in this video. Thanks again!!
@wayofthewrench Жыл бұрын
Awesome, I'm glad you're enjoying the content. As you can imagine, it takes a LOT of time and effort for these videos and it's just me....no cameraman, no editor....just me. So it is always nice to hear back from people! Yes at the end I run all 1,111 leds through the basic led test but the next video on generating your cabinet.xml file shows how to get it ready for DOF lighting. Thanks for the watch and the support for the channel! Cheers Shawn!
@wayofthewrench Жыл бұрын
No worries! Cheers!
@scottzimmer8336 Жыл бұрын
Another great one! Appreciate the explanation on calculating the power draw on the LEDs as I think fuses could be a good insurance bet. It is surprising how much they potentially can draw but as you noted, with normal usage (not 100% white), it should mostly be much less. Any thoughts on the best way to make the LEDs switchable (in case you want to leave them off sometimes)? I heard there can be an issue if the Teensy is plugged into USB and there is no power to the LEDS? Checking every day for the DOF and other configuration stuff. I do see other videos on KZfaq but you are really differentiating yourself as a Master.
@wayofthewrench Жыл бұрын
Thanks Scott! Remember I installed a electrical switch to turn the 60 amp power supply on or off. As for leaving the teensy on without power to leds, I'm sure it's totally fine. Dude, if you can hang in there, these videos are golden...my how to generate your cabinet file and set up the teensy video is in 2 weeks, the installing dof video is in 4 weeks, the install sainsmart video is in 6 weeks, and the gear motor install is in 8 weeks, the shaker motor install is in 10 weeks....its all ready, just gotta wait. I'm trying to pace myself as the next 8 months are going to be brutal for time to build/film. Thanks for the support dude! Cheers!
@scottzimmer8336 Жыл бұрын
@@wayofthewrench Sounds like we have lots to look forward to. Although I am anxious to make progress on mine, the truth is this is a big project and patience is key. I have already changed some of my design based on things you have shared so I will not miss an upcoming episode for sure! Thanks as always.
@wayofthewrench Жыл бұрын
You're right, it's a big project and patience is really important. Ya rush and cut corners, it'll turn out crappy. Cheers!
@JimBeamer2 Жыл бұрын
Hello, your videos are awesome. I have learned so many things to create my own Pinball. Now I'm installing my LEDs and in the place where you have your Matrix I only have a stripe installed. The stripe is connected to the green wire (chanel #3) and when i start a table this stripe beams in full white only. I have connect the wire to another stripe and the LEDs also beam in white. All the other channels work fine. Have you got an idea to fix the error? Thank you and I look forward to your next project.
@wayofthewrench Жыл бұрын
Hrmmm I would check your cabinet file and wiring to see if it's not correct. Did you solder the jumper like I did in the video? Before I did that, all of my leds were full white. Good luck!
@JimBeamer2 Жыл бұрын
@@wayofthewrench I found the problem. The Cat6 cable is charred at the connector in the Octoboard. For some reason the cable got very warm and burned at the connector which caused the error.
@thinkingman9471 10 ай бұрын
Did you connect the side strips directly to power supply or plug into connection on matrix Im asking cause I cant seem to get power to my side strips and not sure why Thanks great video
@wayofthewrench 10 ай бұрын
All of my left strips connect directly to the power supply for power. I would check for power right at the led strip with a multimeter, you might have a bad connection or a break in the led strip. Good luck!
@scotporter9980 5 ай бұрын
Starting to wire up my DOF and a question about the power. You had wired up 6 power injection wires. I assume one power injection wire was for the left playfield LED strip, one power injection wire for the right playfield LED strip, two power injection wires for the LED matrix and two power injection wires for the rest (DMD, behind the backbox and under the cabinet LED strips). For the LED matrix, since you had 3 different spade connectors for power injection, did you daisy chain off one of the power injection wires so all 3 power locations on the back of the LED matrix had power?
@wayofthewrench 5 ай бұрын
No I have 3 power injection points from the PSU to the matrix (left, center, right) and one injection to the back box, under cab, and speakers plus one each for the playfield sides. So 6 power injection wires. Thanks for the watch!
@scotporter9980 5 ай бұрын
Ok, that makes sense. In the video, you can see you plugging in the power injection into the LEDs at the DMD. And then you show that you have power from the LEDs under the cabinet that you state are going to the power supply and the ground. Did you end up not connecting the underneath LEDs power injection to the power supply?
@wayofthewrench 4 ай бұрын
Yes there is only one power input on one end for all of the speakers, backbox, and undercab.
@johngannon 9 ай бұрын
How long is too long a lead using the 18awg wire? I have ones that are about a foot or so - is that too long do you think?
@wayofthewrench 9 ай бұрын
No not at all, those will be fine. I have some several feet long. There are online charts to see wire gauge and their lengths to see the voltage drops. Thanks for the watch!
@JimBeamer2 Жыл бұрын
Hi, I have a question about the connection with the Cat6 cable. I connected my LED strips as described in your video. Now for the second time the Cat6 cable on the plug in the Octo board has burned out. Can you tell me why is this happening? The LEDs have their own power connection and are also provided with fuses. What am I doing wrong? Your videos are great and helped me a lot in building my own cabinet, thank you very much.
@wayofthewrench Жыл бұрын
Hrmmm, burnt out eh? They should just be getting a signal voltage not a voltage enough to burn out the wire. Check your wiring to ensure there isn't a short ( full voltage with out a load) or your positive/negative connections are proper. Maybe your led strip solder connections are backwards or solder is touching both pads. How many leds are you trying to connect on one channel? You are using 5v or 12 aleds? Good luck! Let me know what it was when you figure it out. Cheers!
@JimBeamer2 Жыл бұрын
@@wayofthewrenchI operate the LEDs with 5V and I have connected a maximum of 268 LEDs to one channel. I checked all the solder connections of the LEDs and corrected some large solder joints. Now after a few days the cable is still cold. I hope it stays that way. Ciao
@wayofthewrench 5 ай бұрын
Glad you got that sorted out!
@mattsladek8302 9 ай бұрын
I have read about installing a capacitor in front of the strips. Did you consider that when you put everything back together after painting?
@wayofthewrench 9 ай бұрын
Not sure I heard about that. What does the capacitor do? Smooth out voltage spikes? I didn't add any of these to mine. Thanks for the setup! Cheers!
@mattsladek8302 9 ай бұрын
@@wayofthewrench Correct. I thought the Octo shield might have them built in, but it doesn't look like it. The recommendation is a 6.3v 1000uf capacitor across the voltage and ground leads, close to the strip. If you haven't had troubles yet, hopefully it means the switching power supplies are really stable. Something to consider as cheap insurance, like the fuses you installed. Regardless, love the series!
@wayofthewrench 5 ай бұрын
cool, I'll have to look into that but my aleds are all still going strong so maybe they are not needed. Cheers!
@Ariola5599 17 күн бұрын
@@wayofthewrench It says so on the specs of the LED strip. It's because over here in Europe there are PSU's on the market with a false CE-sticker on it . They are not as stable as the more expensive ones. CE means Conforming European Guidelines. However on Chinese power supplies it means 'China Export'. That's why they recommend 16V/1000uF capacitors close to the LED powerlines, to make it more stable. Also recommended is a 470 ohms resistor between the Data Input (DI) of each strip and the signal out pin of the microcontroller or the Data Out (DO) of another strip. Why that is is not mentioned. Thanks for another great video !
@garyballancore3049 3 ай бұрын
i got and led strip with a built in mic they work off of usb.when im playing my pinball the mic pics up all sound and music
@wayofthewrench 3 ай бұрын
That's easy! You don't get all the DOF effects though. Thanks for the watch!
@LinkCherryTree Жыл бұрын
My USB metal connection had broke off so its not getting any power so if i give it power to the octo board will it work? Time Stamp 30:38
@wayofthewrench Жыл бұрын
If your usb port is damaged, you should be able to put 5V power and ground to the octo board and it'll work. The big thing is that if you do that, you never plug in the usb again but in your case, it's never going back on. Cheers!
@LinkCherryTree Жыл бұрын
@@wayofthewrench Thank You Kind Sir. But on the power supply where is the 5v ground
@wayofthewrench Жыл бұрын
This is a great site to fin out what pins are what, there a good pic of the ground and 5v pins on this page. www.pjrc.com/teensy/td_libs_OctoWS2811.html
@LinkCherryTree Жыл бұрын
@@wayofthewrench I do not find it. I have a 5v powersupply like yours but where i use the ground.
@wayofthewrench Жыл бұрын
www.tinytronics.nl/shop/en/development-boards/accessories/adapter-boards/teensy-3.2-octows2811-adaptor-board
@technofeeliak Жыл бұрын
Great job Emil! Keep on working. You'll get this done. Ooooh, Emil, that's so bad and not recommended. You should at the very least use a regular fan to blow away fumes when you do your soldering. You set a very bad example. Bad Emil. Seriously though, don't be loco! No, you take it easy lol. ;)
@wayofthewrench Жыл бұрын
Pitter patter, let's get at'er......as they say in Canada. Yeah, slowly but surely it'll get done. Ya know the shop is well ventilated, like way more than is needed so I'm good but thanks for thinking about my lungs. Cheers!
@technofeeliak Жыл бұрын
@@wayofthewrench I don't know. I've seen what the fumes do to lungs and that doesn't go away. I just bought a simple fume extractor. It does the job. And yeah no one wants Emil the man sick.
@MandoMike Жыл бұрын
Lol, I've been smelling solder fumes since the first day of electronics class in my early teens. 35 years later I haven't grown a third limb or anything, I think it's safe to say you'll be fine.
@wayofthewrench Жыл бұрын
That's good you're being safe...good one ya.
@wayofthewrench Жыл бұрын
....gotta love the sweet pine smell from the rosin core.
@ryancholmes Жыл бұрын
Are you concerned about the glare of the LED's from the matrix or speakers on your playfield?
@wayofthewrench Жыл бұрын
Maybe a little but they are behind tinted diffusers and the brightness is fully adjustable per led strip so infinite tweaking of the settings can be done. I'll just have to see once it's all done. Cheers!
@mjethier Жыл бұрын
sigh at your soldering. will burn down a house someday.
@wayofthewrench Жыл бұрын
Ok...I'll bite. What is wrong with my soldering?
@mjethier Жыл бұрын
@@wayofthewrench I'll give you a hint, it starts around 9:30
@wayofthewrench Жыл бұрын
Ok, just took a look. I don't see anything wrong with this. The only thing I could do different is cut off a single led and have an entire copper pad to solder to but that's it. Nothing unsafe here.
@mjethier Жыл бұрын
@@wayofthewrench extended exposed leads. come on, you didn't see that?
@wayofthewrench Жыл бұрын
Whatever exposed leads will be checked and covered when I do the tear down and final assembly. Cheers!
Comedy Club
Рет қаралды 7 МЛН
Way of the Wrench
Рет қаралды 13 М.
CarAudioFabrication
Рет қаралды 247 М.
Way of the Wrench
Рет қаралды 4,7 М.
Javi’s Family Adventures
Рет қаралды 13 МЛН