I had some warped plywood that I needed to use. So after a few hours in the sun and some water, It's flat again. Music: Incompetech.com Carefree
Пікірлер: 67
@junc16306 ай бұрын
Thank you very much, Sir. Your video helped me finish my project. I was making a cabinet when I noticed that the plywood I've been using has a warped part to be used for doors. I followed your process and I noticed that all the boards straightened after a couple of hours. Simple and effective. So much satisfied to see a cabinet with flat doors.
@JayVisnansky6 ай бұрын
Glad that help you with the doors ! And thanks for watching too.
@BSxNova9 ай бұрын
took me almost an hour to find something this simple and helpful. thanks!
@JayVisnansky9 ай бұрын
Wonderful ! Glad it helped you. Thanks for watching.
@Jsalas195411 күн бұрын
Thank you!!! Just what I needed for an expensive piece of plywood I had. Much appreciated!!!
@JayVisnansky11 күн бұрын
You’re welcome ! Glad the video helped you.
@Ttommydrums9 ай бұрын
Hey Jay, thank you so much for sharing your skill and knowledge! Kind Regards, Tom Pollock
@JayVisnansky9 ай бұрын
You’re welcome Tom. Thanks for watching.
@nicholaslydon70892 жыл бұрын
Great video, thanks Jay!
@JayVisnansky2 жыл бұрын
Thanks Nick ! And thanks as always for watching.
@trashraptordude Жыл бұрын
Love it Jay! Thanks big dog!
@JayVisnansky Жыл бұрын
You are welcome Cooper. It really does work but you need to use the ply soon after straightening it or it does revert back to being a little warped. Thanks for watching.
@psiu7527 Жыл бұрын
This is first video clip showing how to flatten a piece of plywood. Thanks Jay .
@JayVisnansky Жыл бұрын
That’s great P Siu ! One thing to remember when flattening plywood is that you need to use it soon after flattening it. It tends to go back slightly to that bent shape if it’s not used and fastened down. Thanks for watching.
@Alejandro21811 ай бұрын
Thank you so much for helping.
@JayVisnansky11 ай бұрын
You are welcome. And thanks for watching.
@gekkoniddae4 ай бұрын
will try your method sir. Thank you very much for the tip.
@JayVisnansky4 ай бұрын
You are welcome ! Thanks for watching. And good luck on your project.
@manojamrutharaj90719 ай бұрын
Thanks for the hack/tip...
@kawythowy867 Жыл бұрын
Thanks Jay.
@JayVisnansky Жыл бұрын
You are welcome Kawy. Glad it helped you. Thanks for watching.
@barrywhite9872 Жыл бұрын
Thanks for sharing! 👍
@JayVisnansky Жыл бұрын
You are welcome, Barry. Thanks for watching.
@michebre2 жыл бұрын
Thanks so much great video.
@JayVisnansky2 жыл бұрын
Thanks Michael ! Thanks for watching too.
@TonyThompson-l6n21 күн бұрын
I’m going to go try this, thanks for making the video! I have half a 5 gallon bucket of primer I was drying out to throw but might save it just for a weight now.
@JayVisnansky21 күн бұрын
Perfect use of that primer Tony ! Good luck with your project. Thanks for watching.
@faizullakhan155618 күн бұрын
I keep those buckets. They help in flat glueups where clamp pressure is impossible.
@anonimogarcia19762 жыл бұрын
It will help me, sure!! Thanks
@JayVisnansky2 жыл бұрын
Glad to hear that! Thanks for watching.
@rapture96 Жыл бұрын
thanks uncle helped a lot
@JayVisnansky Жыл бұрын
Excellent ! Thanks for watching.
@Unfinished_sentenc2 жыл бұрын
Thank you very much, I shall pass this on. Thank you for posting. Liked and subscribed.
@JayVisnansky2 жыл бұрын
Thanks A Think ! It worked out great for my project. Thanks for watching.
@faizullakhan155618 күн бұрын
Thank you!
@JayVisnansky18 күн бұрын
My pleasure. Glad it helped you out.
@patelgokul953111 ай бұрын
My cabinate door having both side laminated after few day of laminating it get bend how to fix that ?
@desislavvalchev67552 жыл бұрын
This is easy and helps, just spray the concav side and let it on sun
@JayVisnansky2 жыл бұрын
It is an easy, quick fix for warped plywood. Thanks for watching.
@ska8422Ай бұрын
Thanks. I have a twisted ply and inset cabinet doors are not lining up. Any suggestions sir?
@mcafton5 ай бұрын
Going to try to build a bookcase and some of my plywood is warped. Hoping this will help!
@JayVisnansky5 ай бұрын
It will help Chris. Just make sure you use the ply shortly after you straighten it. I found that it doesn’t stay permanently flat if not used soon after. It will revert to somewhat a warped shape again. Good luck and thanks for watching.
@andrewgreen1940Минут бұрын
Will that work on MDF ? Or on a door?
@macreal652 жыл бұрын
I have a couple of shelves that was given to me, I noticed that they had a slight bow in them, they are shellacked with varnish. Do I have to take that off to make this method work?
@JayVisnansky2 жыл бұрын
Well maybe macreal65. Try spraying some water on them. If the water beads up on the plywood, that means it’s not soaking into the wood. Which helps to straighten the wood. If the water soaks in, you’re good to go. Else try lightly sanding to get some of the varnish off. Then spray with water. Good luck.
@macreal652 жыл бұрын
@@JayVisnansky thank you.
@georgedavall94493 ай бұрын
Jay da Man !!!!!!!!!!!!!!!! 👍
@JayVisnansky3 ай бұрын
LOL ! Thanks George.
@Abidjanhola2 жыл бұрын
Would this work with a thicker and longer piece of wood
@JayVisnansky2 жыл бұрын
I’ve only tried this on plywood. But give it a try and let us know. Thanks.
@dbaroness1 Жыл бұрын
Do you do the same thing for Luan . And if you can how do you keep it from doing it again
@JayVisnansky Жыл бұрын
I’ve never tried Luan D B. If you do try it, let me know your results. Thanks.
@totsh20566 ай бұрын
Thank you. Will this work with pine too?
@JayVisnansky6 ай бұрын
It should work on pine too. I’d give it a try on a sample piece so you’d know what to expect first. Good luck on your project. Thanks for watching.
@Edubarca4610 ай бұрын
Will your method work on 1/8" plywood also?
@JayVisnansky10 ай бұрын
Sure would Eduardo !
@disklamer Жыл бұрын
Fair dinkum.
@lk-music7 ай бұрын
All I need now is a flat surface to do it on!
@JayVisnansky7 ай бұрын
😂 ! Good luck on that. Thanks for watching.
@mikefixx71772 жыл бұрын
I tried this 3 times and it doesn't not work, any other ideas?
@JayVisnansky2 жыл бұрын
I found that once it’s somewhat flat, you have to use it soon or it will revert back to the warped shape Mike. It doesn’t stay flat indefinitely. Hope that helps somewhat.
@vashon100 Жыл бұрын
@@JayVisnansky Ah, that's an important point, good to know.
@alexexoticcars3272 Жыл бұрын
Does it have to be in the heat?
@JayVisnansky Жыл бұрын
No it doesn’t Alex but it helps.
@user-ir4jq1xg5s8 ай бұрын
Water
@lordofdunvegan69242 жыл бұрын
Thanks Jay.
@JayVisnansky2 жыл бұрын
It worked out great for my project too. Thanks for watching.