Thank you!

Thanks John!

I’ll make the flash video soon, thanks for subscribing, I’ll test both of the flashes you are using with an rta to show what is actually happening, I feel the kicker flash and soundz flash have too much bass

@@volunteeraudio love the channel super informative. I was wondering if you could provide me with the entire parts list for Tall's audio build? I'm up in Canada and would like to do the exact same setup to my 2020 street glide.

@@ShadesVaper we ship to Canada! We also make some of the harnesses needed in house. Call 1-844-30AUDIO to get pricing or to order

@@volunteeraudio oh man, that's awesome news!...only issues for me would be flashing and properly setting the gain. Also the Canadian government bending me over with duties and taxes..:(. .. will definitely give a call to discuss. Thanks for the reply!

@@volunteeraudio how can we rent the DD1

Yes amp gains are set before connecting speakers

Thank you!

The Soundstream radio is clean to volume 50, that is where amp gains should be set to max unclipped output

​​​​​@@volunteeraudioThanks for responding Jay. To be clear, I should not have to reset the gain since the Soundstream is clear? I would like to add that I can play it louder, but I play it on 30 normally as my max My set up is two diamond 6x9s, two 6.5 yellow baskets, and 800.4 with no DSP.

Same test tone as shown here

We set eq flat when adjusting the amp, then you turn down what is too much, want more treble, turn down the bass, want more bass, turn down the treble

Call us @ 1-844-30AUDIO to rent or get price quotes, the subs sound great and add more bass than I thought they would, it’s not like 2 10” subs in a big ported box but for sure loud enough to hear all the music you have been missing

@@volunteeraudio awesome I will call tomorrow and thanks for the quick response!

Yes

We set the crossovers using a cc1 to our specs, we find most speakers will play lower than the manufacturer suggests

@@volunteeraudio thank you.

Why use a dsr1? The Sony has 5volt preouts, the dsr1 lowers rca voltage to 1.5volt

@@volunteeraudio I am running 3 amps...Ex4 Euphoria in the front to run uppers and lowers and tour pac ...all Hertz 6.5 neo...one amp in tour pac to run 6x9 in lids and I have the RF sub kit in saddlebag...how can I wire the 3 ? Can I run the tour pac and 6x9 in parallel? And just have the one amp in the fairing and the RF sub

Would changing head unit to the Soundstream be better...cant you band pass the sub output?

@@joellongoria2239 yes you could add the 6x9’s to the rear channel to only run the one amp, sub out to your drop in sub

This is an aftermarket system

That will be a different video, we do not use the dsr-1 since it loweres the input rca voltage to the amp to 1.5v

@@volunteeraudio My customer came to me with a DSR1 installed already wanting me to tune it. He's using it as a LOC with the high level input from the H-D radio since no RCA Outs on his H-D radio. Wouldn't I just use the DSR1's Trim levels to plug DSR1's RCA out into my DD-1 and set that to distortion, then plug those RCA's into his Alpine KTA-450 amp and then continue setting the amp gain as you describe in this video? (assuming setting DSR1 x-over to full and EQ to flat before adjustments)

Which amp? Which Rockford speakers?

@@volunteeraudio soundigital 400x4...Rockford TMS65 6-1/2

@@PkwyDrive13 the 400.4 is too small, they do not produce 100 watt rms x 4 but more like 50 watts per channel, with less power your mids produce less bass, tweeters are very efficient and get loud off very little power, a bigger amp will help the tone, also your amp setting may be incorrect as well

Call 1-844-30AUDIO , they are in stock, call between 8am - 6pm est Monday - Friday, or give me your number and sales will call you

I built it from a Harley specific lower y harness and a pair of rcas

Do you sell them by chance I'd love to have those for my shop

Yes we use high pass filters on front and rear channels to keep bass that is too low in frequency from causing the speakers to distort at high volumes

All amps have gain controls

If they don’t have gain controls there is no way to adjust, normally this would only be the case in factory installed amplifiers

@@volunteeraudio Biketronics BT4180 Amp

My amp only has sensitivity and frequency