✅Volvo S80 2.4 D5 Engine Swirl Flaps Removing & Solving

Рет қаралды 97,034

3 жыл бұрын

✅ Dyno Tested ChipTuning files individual for You!
✅ DPF, EGR, Swirl flaps, AdBlue Solutions
✅ Stage 1 + ECOtuning
✅ Phone📞+371 29919194 📲WhatsApp
✅ Skype ➡️ Modrix
✅ Mail modrix@inbox.lv
✅ Прошивки для чип тюнинг + Volvo Прошивки DIM + ICM

Пікірлер: 50

@sipahisipahi9299 Жыл бұрын

Super Arbeit danke für das tolle Video hab den gleichen Volvo wie du auch und konnte mir ein paar Tipps😊

@user-he9tu8yk1v 3 жыл бұрын

Спасибо за твои видео 👍. Это тяжёлый труд! С наступающим новым годом!

@modrix 3 жыл бұрын

Thanks!

@fernievanrodrius6078 5 ай бұрын

Awesome, thanks

@funv3188 3 жыл бұрын

😁i remooved mine too

@reactorrapfactor 2 жыл бұрын

do you have a video of the removal of the intake manifold?

@reactorrapfactor 2 жыл бұрын

you said the d4 has the problem solved, how about the 2013 D3, is it resolved on d3 as well?

@TylerDurdan241 2 жыл бұрын

Is the 2.4 D4 a better engine despite not having quite the performance?

@brodermeck8704 3 жыл бұрын

What do you use to plug the hole?

@the_dovla Жыл бұрын

You're wrong, not every D5 has swirl flaps. On my D5 biturbo, 205hp no swirl flaps at all...

@BlueSky-bx5tf 9 ай бұрын

Hi, you said that you are not going to replace them, you mean the Swirl Flaps? If they are still good, no reason for new once, right?

@Dravito94 Жыл бұрын

How much for removing them and how much does this cost?

@wimvanhoof4903 3 жыл бұрын

With VIDA, how is disabling in the software of the swirl valves done? Do you have video how to do that?

@modrix 3 жыл бұрын

It is not possible in vida only in winols

@smepsv7017 3 жыл бұрын

Good afternoon... From UK.... I have a 2007 V70 2.4se sport. D5 engine. I replaced the actuator arm 6 months ago and now I have noticed oil weeping out. You mentioned in your video about locking down on somthing to stop the oil coming out before removing and replacing the swirl flaps and removing the carbon deposits. Maybe you have touched on something that is causing my problem.... Could you please elaborate more on that specific section of your video. It was 1.50/1.57 minutes into your video?..... Thanks 👍

@modrix 3 жыл бұрын

Just take out flaps an lock 🔒 holle job done

@smepsv7017 3 жыл бұрын

@@modrix ok thanks for super quick response 👍🖐️ But what is it that I'm locking?....🤔

@Tompawlowski 3 жыл бұрын

Just replace your swirl flaps. If the arms fall down and the sealing starts to break, you just need a new swirl bar installed. That's around 100-120 quid for the part at volvo

@smepsv7017 3 жыл бұрын

@@Tompawlowski 👍👍👍

@gasgas2689 2 жыл бұрын

@@modrix In the UK unfortunately doing this will make it fail the MOT. I don't think they have roadworthiness and emissions tests in some other countries as we do. My EGR has got stuck and blocked after 112,000 miles in the UK so I will see if I can clean it out and get it working, and then change the swirl flaps as I have a lot of play where the flaps axle comes outside the head.

@sillysodus0 3 жыл бұрын

Are you removing swirl flaps altogether? Leaving holes open? And re programming ECU so it does not try to open and close?

@user-he9tu8yk1v 3 жыл бұрын

Yes

@funv3188 3 жыл бұрын

Hello, i have few questions. If remooving egr and dpf, can flaps be remmoved or just reprogrammed ? Also is it better to change new set of flaps ? What is advantage of remooving them ? Is it just loose some power on small revs, start driving or it is also rekated to better performance, oil, turbo lubrication, injectors ? I mean many discusions on them..Also some say leave egr, leave new flaps, just drill holes trough dpf. So what is your advice ? I understand purpose of egr, not just no black shocolate in intake, but regarding cooler intake temperature, and regarding nox gases, but then again..bad for turbo, oils, lubrication, performane, dpf clogs. So in my opinion remooving dpf and egr reorogram and sealing is good for engine, performance, etc, good for rurbo, and so on. But how regarding swirls then in this case if doong chiotune uograde. Also regarding engine oils in both cases. 0/w30 or 5/w30 ? Remonded 0w30 for colder climate, but if miage about 300 000km then maybe 5w30 better and if no egr no dpf. Better in cold climate start, but bad lubrication of turbo etc if5w30 ? What would be your advice ?:) Thanks in advace

@nect7354 2 жыл бұрын

Did he replay yet? ;)

@avishaikarat3982 3 жыл бұрын

Thank you, usually after how many Km this happen? why you need to reprogram the swirl flap, the electronic control unit ... and how you do it?

@modrix 3 жыл бұрын

Remaping off EDC16C31 ECU

@modrix 3 жыл бұрын

250 000 km

@intarsdruka 2 жыл бұрын

Cik tāds prieks izmaksā? + chiptuning

@robertasviskupaitis9195 3 жыл бұрын

whats the point of removing them flaps? Not better to clean this and reinstall the flaps? Is this not better to clean and buy a part to replace?

@Arturs.B 3 жыл бұрын

Man arī eļļu sulo no gala. Kā tieši to pasākumu noslēgt galā? Kāja jau sen nolūzusi un pazudusi, braucu ar klapēm ciet, tagad vaļā un vieglāk, patīkamāk iet.

@Tompawlowski 3 жыл бұрын

Clean out the soot, install new swirl flaps, fix the injectors and you're good to go for another 300000 km. THAT much of a soot buid-up indicates injectors problems, so that's where you should start with fixing that engine. Clogged swirl flaps generate even more soot, as a feedback loop so the result becomes the reason. If you're about to remove swirl flaps form the ecu, remove egr and dpf as well, WITHOUT writing a new map and WITHOUT fixing injectors, you get back to 2.5tdi era economicaly and ecologicaly wise. Or just buy a petrol engine car... ?? Aw, you're a moding company. That explanes a lot...

@RealRick_Sanchez_C137 2 жыл бұрын

No Its Eastern Europeans, who cheap out on €300 for the new set of swirls, simply take them off and call it problem solved.

@skandinaavsb2287 2 жыл бұрын

Sveiki!cik maksā izņemt un izprogrammēt swirl flapus ar visu darbu? Egr vārstu arī interesē likvidēt.volvo v70 2008g 136kw D5.

@sheffcitys2forgedinsteel255 5 ай бұрын

Did you eliminate the egr valve

@dragonbeatlikeshit Жыл бұрын

hello,i have the same problem with the same car ,must to reprogramate the "flaps unit"?sorry my english

@MementoMori-xx5qo 10 ай бұрын

Yes you must remove the actuator from ECU

@dannybooo9090 2 жыл бұрын

What problems do swit flaps cause like that ??

@madmac-bq6ti Жыл бұрын

Restriction of acceleration, it'll big down and the gearbox will hold revs.

@powerkhe Жыл бұрын

Par defaut les clapets sont en position fermée? au démarrage ils s ouvrent pendant le ralenti ?

@Sylfirus 11 ай бұрын

J'ai observé qu'au démarrage le controlleur de la biellette de swirl fait un quart de tour avant de revenir à une position quasi fermé, je suppose qu'effectivement les clapets sont a peine entreouvert lorsque la voiture est immobile avec moteur en fonctionnement. Aussi, en mettant un coup d'accelerateur, le petit controlleur du swirl ouvre le clapet via la biellette en fonction de l'intensité de l'acceleration.

@tierfuehrer2 3 жыл бұрын

T1 and T2 dont have swirl flaps.

@martinvolvo4066 3 жыл бұрын

Megashit 😯

@SHINdanny 3 жыл бұрын

what did you eat Sir?

@everves Жыл бұрын

Aaaaand where's the solving part ? I mean for DUIs.

@conradtaggart9959 2 жыл бұрын

What are the symptoms ?

@noudialp Жыл бұрын

For me it was shifting at higher rpm like 2200. I just removed the actuator arm and problem is solved. No more swirl flaps.

@focus678 2 жыл бұрын

Low-quality engine oil.

@7302ab 3 жыл бұрын

STAY AWAY FROM DIESEL CARS

@gasgas2689 2 жыл бұрын

That certainly applies to modern diesels. However, you can't beat a pre-1993 Mercedes diesel. Or, I guess, an early Volvo without all this emissions crap that causes more global warming in its manufacture than it will ever save during its lifetime.