volvo 2.4d Swirl flap arm replacement. dpf cleaning. carbon clean. glow plug testing. particle filter press sensor test and replace.
Пікірлер: 28
@daevidcrawley69363 ай бұрын
Great video, thanks. Helped me no end in diagnosing the same issue with my XC90...THANKYOU!!!!
@jackrussellrambo5547 Жыл бұрын
Liie the way the customer says he can do the rest himself hahahaha until he calls u back in couple days.lmao
@leehughes2666 Жыл бұрын
Great vid. Very informative.
@matthewwaite78062 жыл бұрын
Had the same issue with my xc70 and same engine. Power to the dpf pressure sensor, lines free with no leaks. New sensor and still no reading from the dpf pressure sensor. Can only guess its been mapped out.
@mrtaliano31649 күн бұрын
What tool you use to disconnect the tubes ? Tkx
@restart54752 жыл бұрын
very good i enjoy your vids mate, keep em coming i do same stuff as you. you give me some great tips thanks
@ORileysAutos2 жыл бұрын
Thank you 😊
@m_r_kartal11 ай бұрын
Great vid. Thanks for sharing 👍
@ORileysAutos11 ай бұрын
Thanks for watching!
@davehartnett146 Жыл бұрын
Hi Jimmy I have a similar fault with my Xc70 I've cleaned the dpf and egr, I'm getting codes Pressure Sensor Particulate Trap.ECM-2A10 EGR Position Sensor. Faulty Signal ECM -44B0 What could it be?
@colinhamer65062 жыл бұрын
any tips I'm on with sorting out a 09 1.6 v50 with only 69k I've been told it had a DPF warning before and it had a new preshor sensor pipe and a regen the warning soon came back and they ran it until it gave up the DPF is completely blocked I've ordered a new one but I need to figure out the reason it got so bad the DPF temp sensor is showing 99.9 and the pressure is 0.0 no matter what I do and I've given the additive tank a tap and it sounds empty
@ORileysAutos2 жыл бұрын
I'd test the hoses for leaks with smoke tester. Test there is power to the sensor. Test the sensor by pushing pressure into it while reading live data.
@colinhamer65062 жыл бұрын
@@ORileysAutos cheers for replying I'd allrede had a look at that side of it the pressure sensor was 0.0 I put the new DPF on it started perfect the DPF temp sensor kicked in and the pressure jumped to 20 and stuck there even when not running fitted a new one getting good live data now the additive tank seems to be the root of the problem it's still 1/4 full but it doesn't want to speak to the scanner
@davehartnett146 Жыл бұрын
Brilliant video and good advice 👍
@lovepreetsinghhanjra19972 жыл бұрын
👍👍
@geoff31722 жыл бұрын
Great video Jimmy..when do you know when your car needs a revive clean
@ORileysAutos2 жыл бұрын
I just do one yearly with a service
@timothyduggan2263 Жыл бұрын
How does that DPF cleaner work? Do you just pump it in through the pressure sensor pipes, leave it to soak then run the engine? Mine is blocked and it won't regenerate as I think it is too far gone and I can't get it off the car without an angle grinder as the nuts are completely rusted up!
@ORileysAutos Жыл бұрын
What's happening when you try to regen it
@timothyduggan2263 Жыл бұрын
@@ORileysAutos I'm using the Volvo VIDA software and it says 'start conditions not fulfilled' which I think is because I have a second fault code 'DPF Faulty Sugnal' in addition to the normal 'DPF Full'.
@ORileysAutos Жыл бұрын
@@timothyduggan2263 you'd need to check the dpf differential pressure sensor is working
@timothyduggan2263 Жыл бұрын
@@ORileysAutos Thanks I'll check that. I was getting some movement on live data so assumed it was OK, but I'll do a more thorough test. Thanks for the advice.
@zzhughesd Жыл бұрын
Was going to ask!! I know you'll know. DPF differential pressure sensor for the D5 engine in an V70, is it accessible , I may as well change this before DPF as it won't passively regenerate
@ORileysAutos Жыл бұрын
Sorry I don't remember the location.
@user-od3rl5mc2 жыл бұрын
Why not use the DPF cleaner instead of revive given you were running it though the dpf anyway?
@ORileysAutos2 жыл бұрын
I've had better success rates with revive
@user-od3rl5mc2 жыл бұрын
@@ORileysAutos very good Jimmy, love the Vids keep em coming
@the_retired_mechanic2 жыл бұрын
Must be a pain in ass to put his car back together then have to go away and get the parts then strip it again. All time out of your day.