Desert Dog did a series back in December that was the best series I’ve ever seen. I urge everyone to watch them.
@aaronlatta69933 ай бұрын
I just started watching this episode but would love to see an episode on the 338-06. After seeing your show on the 338 Fed I had a 338 Fed, and a 338-06 made from a couple of rifles that hadn't left my gun rack in years and I am currently trying to work up a load for each. They both shoot great just haven't decided on bullet weight, construction, speed, etc. It might not be a show for the masses but every time you guys mention either of those cartridges I hang on every word.
@fisherman_rue24033 ай бұрын
Over the past 5-6 years I have swapped mounting solutions on ONE rifle 5 times until I settled on "Direct to receiver" rings. Sight alignment and cheek weld led me to getting a cheek riser for the stock.
@flipmatyze3 ай бұрын
BIG SHOUT OUT to MARK for the Warren G reference. im a long time listener from the LBC since episode #1. you guys keep the videos rolling!
@VortexNation3 ай бұрын
Appreciate the comment and all the listen's over the years. We selected you to receive a Vortex Nation Podcast hoodie in the size of your choice. Hit us with an email to socialmedia@vortexoptics.com and we'll work to coordinate getting your new favorite wardrobe piece headed your way. Thanks again! Mark B.
@oscarbear74983 ай бұрын
Podcast video request. Handgun hunting, 460s&w mag. Talking over chest holders, handling, scopes, single big bore revolvers vs rifles/pistols combo. Optics on revolver would be interesting:)
@colefahey90323 ай бұрын
Please, I'm begging you, fix the Vortex Hunter ring base. I mount a lot of scopes, rings, and bases for customers, and the only thing I hate more than when a screw is hex instead of torx is when I have to use a giant flat head. You used torx for the ring. Why wouldn't you make the clamp smaller, lighter, and torx? Why is this big bulky knob?
@FMDad-dm5qo3 ай бұрын
Agreed. That big flathead-slot knob is annoying. Something that falls between the Pro and Hunter rings in quality, weight & cost would be appreciated. The Pros are quite satisfactory, but for some rifles (e.g. a .22) I’d like a lighter option that’s still secure, reasonably trim and well made.
@mikekropidlowski12373 ай бұрын
I had the same "big knob" thoughts on the mount on my venom red dot for league pistol. Stopped in at vortex headquarters and mentioned it and they hooked me up with a flush mount right then and there. That kind of service has converted alot of brand specific shooters I know to the vortex line up.
@PitPwny2 ай бұрын
Torx heads are awful. I’ve had far more torx screws strip out than hex, in a wide variety of applications. I do wish they would facet the edges of hex screws, so you have the option of undoing them with a small wrench as well. But it would probably cost too much.
@alby-oy4nc2 ай бұрын
I'm glad jimmy addressed the tube size for the canted rail. I have a 1 in tube with only 40 moa of travel on a .308. I shoot it out 700, and the 20 moa rail helped me be able to dial to that and not be at the end of travel. And my zero was not bottomed out either. I have room on both ends.
@markofmckinney9413 ай бұрын
Thanks for the podcast… I learned a few things for sure. Separately, was wondering if Mark’s quote, “Regulators, mount up” may actually be from the movie Young Guns…
@Ninaleechie2783 ай бұрын
Excellent, comprehensive podcast. Glad you mentioned Signature rings. Great product.
@AaronBleess-yz4cw3 ай бұрын
Good luck finding the auditorium. I’ll be buying a ticket when you do.
@whackemnstackemchronicleso33003 ай бұрын
That quote is originally from Young Guns fellas
@davidplatt89153 ай бұрын
Great podcast today guys. As it happens, I very recently put a new Diamondback Tactical scope (my second such unit) with your Pro rings on a new Savage "Beavertail" B-Mag .17 WSM rifle I'm putting together for prairie doggin'. This discussion helped confirm what I already knew about mounting scopes and I appreciate that. And, you're correct...the rings are esthetically pleasing and perfect for the scope, this rifle and it's purpose. Thanks, again, for taking the time to provide these podcasts. (Ryan's a wealth of knowledge...impressive.)
@jamesclark43 ай бұрын
I just bought a vortex 6x24 bdc scope perfect timing
@leejohnson20243 ай бұрын
Ever since I watched the lead balloon video in the 338 federal I have been lusting after it. It is exactly what we people on the east coast need, super hard hitting 300 yards and in cartridge.
@kjaxxnАй бұрын
FYI: Mark, Warren G did borrow that “Regulators mount up!” quote from the western film “Young Guns”. They were the Regulators. Good on you though Brother. I used to get it from friends for rockin’ some Ministry or Smashing Pumpkins back in the day. Don’t let the crew tell ya what to like lol Luv these chats, I’ve learned much and I❤Vortex optics.
@chadperry40213 ай бұрын
I’d love a longer than 10 minute talk about the 338 RPM. Especially compared to the 338-06 and 35 whelen.
@mott77493 ай бұрын
Seemed fitting for ep. 338
@nielskrejcir50253 ай бұрын
Would love to see the 9.3x62 in the mix there too
@chadperry40213 ай бұрын
@@nielskrejcir5025 Throw it in the mix. Now that you mention it it gets compared a lot to the 35 whelen bland occasionally the 375 h&h not not much to the 33’s.
@smallbatchprecision27913 ай бұрын
Using the XTR Signature rings to solve a problem with mounting a night vision scope with LRF. I needed to cant the scope up about 10MOA to get the LRF reticle near to the POI. All this to make ranging targets quicker (and at any magnification to boot).
@Godfryness3 ай бұрын
Thanks for taking the time for all your podcasts
@Thetankguy308Ай бұрын
Keep these videos rolling boys!
@6point5x553 ай бұрын
When all your podcasts turn metal . 🤙
@jakewhite43213 ай бұрын
I like the camera work on this one. The panning left to right reminds me of when a video game goes idle and the camera pans around the main character.
@Buckeyesully3 ай бұрын
Young Guns
@trevorlecocq92873 ай бұрын
Thank you, that was painful to listen to! :p
@davidplatt89153 ай бұрын
Knew immediately what he was quoting from! Not a bad segue, Mark!
@JamesClark-lw6sw3 ай бұрын
Yes- the Young Guns movie was the origional.source, but apparently Mark's lame Suburban Whiteboy azz only knew it from some trash Rap song .
@nevadacoyote3 ай бұрын
Regulator's mount up i heard in young guns the movie part 1
@rogerinlow50333 ай бұрын
Please do an episode on the 338-06. I think you talked about the 8mm-06 before. I enjoy reloading and shooting both cartridges. Just never took an animal with either one. Thank you. This podcast helps keep me awake while trucking through the southwest.
@joncook63313 ай бұрын
Good timing! I just picked up a weaver style mount for my Savage 170 😎
@ronws20073 ай бұрын
TLDR: Every Vortex scope I have is mounted with the Precision Matched rings. Yes, a bit pricey, zero regrets. Jimmy said it a year or so ago. You have this precision instrument. Why not mount it on the best rings? the Vortex PM rings need no lapping. And no thread locker. Step away from the Loc Tite or the Vibra Tite. Use the the recommended torgue, enjoy the shooting experience. Also, don't zero in a vise or lead sled. Zero against your shoulder. Whether hunting or competition, the butt will be against your shoulder, not a lead sled.
@WayStedYou3 ай бұрын
The regulators mount up line is also just copied from the movie young guns which Ryan may be more familiar with
@markmiller98943 ай бұрын
Exactly what I was thinking
@dhouston90493 ай бұрын
Tried to mount the old model 1 inch 2-10x40 Light Hunter to my HOWA 300 win mag with a #4 contour barrel using the two piece lightweight Talleys. Could not obtain proper eye relief with that combination. A change to a Talley pic rail with extra low Vortex Pro rings has been the perfect set up for this rifle. It provides the necessary eye relief, a super low mount with just enough clearance for the magnification adjustment. The Razor glass is quite nice.
@givaghi3 ай бұрын
So now I do not know what to do: I just got 2 BRNO 98 and one has 2 pieces of picattinny that at least allow me to get a better eye relief and the other one has a standard set... I wanted to change the standard because the eye relief is just abysmal, but after this video... I really feel I need to keep the "age correct" pieces.
@foonus4063 ай бұрын
Picked up a used savage 17WSM a few years back that required extreme amount of travel in the scope to zero. With a diamondback tactical you would run out of travel before you could get on target. Ended up with a new one and it did exactly the same thing. Solved it with a set of Burris rings with the adjustable MOA shims and set the thing at -30MOA , though I would hesitate to use a plastic shim setup on anything other than a rimfire. Shame they ruined that .17 WSM by pairing it with those BMAGS and inconsistently manufactured ammo... it absolutely destroys the .17 HMR but can't hold a candle to the Hornady marketing machine. As to when the QD mounts are useful - I like to use them with a .22 when swapping between a thermal and a PST II with elevation dial and picture quality at long range.
@aaawman2280Ай бұрын
I get it, you guys don't use loc tite but I tried it cause you guys are my mentors or something like that, after a 100 shots, rings where allowing my scope to slip. Fixed it with retorque and loc tite. Around 150 to 200 shots later, scope base is loose, fixed it with steel stick from jb weld to bed the base to my rifle and loc tite on the screws. Seems loc tite or over torque is the only way, I choose loc tite my friends.
@GarageHooning823 ай бұрын
I'm pretty certain that Ryan nailed exactly what I had to dial to 0 my tikka (which I purchased because of him, based my precision rifle off a tikka action)
@alexandercluster30033 ай бұрын
The vortex rings are labeled as being compatible with weaver or picatinny. They definitely take a little convincing to get on a weaver though. Great content guy! Very under rated podcast.
@mott77493 ай бұрын
I have found that as well!
@BB-ss3mw3 ай бұрын
Had no issues with pro
@jasonmerfeld90883 ай бұрын
Ryan is a metalhead?!? Badass
@angelosantora66253 ай бұрын
GREATEST ENTRY EVER!!!!!
@HoffnerPrecision3 ай бұрын
Thanks for explaining why weavers are still relevant. Most people wouldn’t even consider anything but picatinny these days. Also, I had never considered that there might be a downside to using a 20/40moa rail as far as clarity goes.
@Juliankb393 ай бұрын
Didn't think Ryan would be the metal guy, nice
@mikekropidlowski12373 ай бұрын
After hearing Mark having to explain his opening quote, I picture Mark cruising around in a early 80s cutlass or blazer bumping that song. 10 minute talk idea for the guys round table talk like first gun "first car"
@jasonseiverling53543 ай бұрын
I live in Pennsylvania. I see people drop the bank on a rifle and then pull out pocket lint for the scope and mount. I think that’s the first thing to be addressed. The second, rifle manufacturers need to get better at aligning base mount threaded holes.
@TTT-du6oj3 ай бұрын
Excellent discussion on mounting solutions👍
@lmarottek15 күн бұрын
I had to an issue with a pst gen 2 1-6 I had mounted on a DDM4V7. It was in a aero precision ultra light mount. Couldn’t zero the rifle I was always chasing a zero. Had it tightened down to the recommended 15 inch pounds. Got a call from vortex a week later saying my scope was fine and we had a conversation about the mount come to find out they suggest 13 inch pounds for that mount. They left me a card to call if I had anymore issues. Fixed my problems and I will continue to buy vortex optics for that reason.
@mitchellbeyer52053 ай бұрын
So after watch this show I'd like to see the 338-06 vs the 35 whelen and what are the differences in ballistics and energy.
@joearledge2 ай бұрын
58:30 Fun fact: The higher you mount your sight/optic, the farther your max point blank zero can be! So if your method of target engagement is MPBZ, more higher the sight = more better(within reason obviously). If you're dialing or using hold overs, then height doesn't matter, just whatever height fits you and your set up the best.
@joearledge2 ай бұрын
53:10 PUPPY!!!!
@LeakyJoosbox3 ай бұрын
Vortex nation stadium tour? 🤔
@jondavis8092 ай бұрын
Not that it matters. I'm black. I LOVE that he referenced Regulators... and they had no idea. C'mon man!! Your a dork 😂. Still love the podcasts. I'm currently looking for 270. Less than 1k. Considering cva cascade for mounts, cerakote and threaded, or 200 more for tikka t3 (great cycling). Or perhaps bergara b14 for their action and good barrel. Love some correspondence.
@lenzadlberger3 ай бұрын
😀 you Guys have no idea how many different Mounting Solutions are out there in Europe.... espacially Germany Blaser have their own then there are Suhler Einhakmontage, Suhler Aufkippmontage, EAW Schwenkmontage, Dentler Montage ........ nowadays thanks God many Guns have Standard Pic Rails
@mattp95743 ай бұрын
The answer is simple… whatever one holds Zero and you can switch between all of your rifles pistols and shotguns without much modification to those platforms. So you just have to select your mounting solution before you purchase firearms and only purchase firearms that support said mounting system. Piece of cake right?!? Great chat guys love the podcast
@CalebDeBoer3 ай бұрын
You might be asking far more from your firearms than your mounting system, depending on what type of adjusting you mean. I’d argue using Picatinny and no MOA put in from the rail is going to suit that best. Single piece mounts all the way for both scope rings and rail. Takes a lot of moving out of it, I’ve ran and in a couple cases still run(stupid 34mm tube) two piece scope rings, and it’s astonishing at times how often you end up moving rings even going back and forth between single piece rails, get one piece mounts and they will almost always land in the right spot.
@markmiller98943 ай бұрын
I have a couple of old BSA (Herters) that take a proprietary ring, dovetail receiver top.
@TheGunNerd3 ай бұрын
Episode 338 and it's not about 338 Lapua Magnum, missed opportunity
@taylormartin43463 ай бұрын
Probably because it was done 3 years ago
@TheGunNerd3 ай бұрын
@taylormartin4346 missed opportunity to do some other 338 cartridge
@Beastcoast1113 ай бұрын
Have you guys done a "one rifle for the rest of your life" type video yet?
@droppinbrass52403 ай бұрын
Just ordered a venom and precision rings yesterday. How fortuitous
@launchalot87453 ай бұрын
Episode 338 is released just as I'm in the process of finding a scope and mounting solution for my new 338 Win Mag. Uncanny...
@harps66683 ай бұрын
G'day I have a RPR 22LR 30MOA rail with High rings & a Diamondback FFP 4x16-44 MRAD and it's zero is 50 meters, I only have >5MRAD left in the scope to go longer distances and to get to 200 meters I have to use the drops on the reticle, What is the best way to get more out of this change the scope, higher rings? Cheers
@shanerhodes9253 ай бұрын
I have a Browning x bolt. I used a set of Talley Browning labeled ring base combo. Or however you word them. I get a flyer every group two touching one out no doubt now. I have fired hundreds of rounds out of it in just the last two months. Could that be the rings need lapping?? I have heard that will cause flyers . But I have never done this but I am new to the one piece ring base combos. I used to always use Leupold mounts and those are made to have some play but any suggestions??
@WayStedYou3 ай бұрын
The one thing that is annoying with picatinny rails is they block the loading area on most rifles if you don't have a detatchable box magazine
@Gavinmumford3 ай бұрын
What’s the best way to mount direct to receiver style? Do the rings need to face a certain way? @VortexNation
@hessmedstorparn3 ай бұрын
Mark listen on Helloween and you are hooked 🤘🤘🤘🍾😊
@brandonb87003 ай бұрын
Mark, Biggie or TuPac?
@rickyhoyt27173 ай бұрын
Why doesn’t anybody make straight tube scopes anymore, I have a side mount base on a 3040 kraig some three power scopes old-school would be nice
@cameronbissell70943 ай бұрын
Hi-lux has some interesting options.
@johnkeisterelquattro25533 ай бұрын
A round bolt as opposed to…….? A triangle bolt? 😁😆
@kalindanley28432 ай бұрын
Ppl still use blue? I never hear professionals talk bout vc3. Why oh why wouldn't Ryan have been advocating the use of vc3. Instead he uses blue...? What am I missing here?
@aquaman60813 ай бұрын
Talley two piece ring/bases are the only way to go on a hunting rifle
@BAYRAKTAR_MAN3 ай бұрын
Why does mark look high as hell
@paisleyprince52803 ай бұрын
Slipknot is from Iowa, 311 is from Omaha.
@dedon033 ай бұрын
Nate dog Warren g regulator sound track for above the rim.
@scottstruif39393 ай бұрын
@19:20 There is no such word as “vestigular”
@JamesClark-lw6sw3 ай бұрын
The guys are functionally illiterate mellenials- what do you ecpect?
@oliviermorneau28192 ай бұрын
Well, Ryan gave me another reason to love him, i think metal is the best kind of music, Mark i'm sorry but you lost some respect, considering rap as music is already a blasphemy, please let Ryan help you😂
@raywhitehead73018 күн бұрын
Spur.
@MrJensDrachsler3 ай бұрын
Iam sceptical about this podcast, considering vortex doesnt sell rail mounting solution scopes. And they dont consider the far superior european mounting solutions it will be a shit show 🎉😂
@DrbBeeper212 ай бұрын
Mark, you were cool until thus young guns fail. Still love ya
@elendal3 ай бұрын
Weaver is dead for new guns.
@BB-ss3mw3 ай бұрын
But a lot of guns with weaver bases and pro rings work perfect for new scopes
@JamesClark-lw6sw3 ай бұрын
Mounts are NOT the "core" of the gun - only the foundation of the optic system. The GUN will work and shoot just fine with iron sights.
@oscarbear74983 ай бұрын
What year do you live in, 1887?
@Yetified_Mayhem3 ай бұрын
Great year!
@oscarbear74983 ай бұрын
@James You remind of if this meme "that's a gimmick sonny" kzfaq.info/get/bejne/j7t3qJOZvr7blY0.htmlsi=bCJbnmmd1aFlpm_b