Bought a 35 deg guide and sandpaper kit and sharpened my first VPA single bevel head tonite. Very pleased with the results on a new set of heads. S7 tool steel can get really sharp and i only used 800, 1200, and 2500 with buff compound. I can only imagine if i started at 2 or 400 grit .Thanks for making a guide that works and like u taught us, the key is that burr ;) wonderful tools.

Just received my 35 degree guide and it works beautifully! I had a hair-shaving edge on one of my 150 grain single bevel heads in 2 minutes.

I bought your systems a few years back for Iron Wills and Cutthroats.. I haven't stayed in contact but have to tell you that your system is the first thing that ever gave me confidence in sharpening myself. I had never seen results with any other sharpening system. I was going through my stuff and saw your 3d printed guides and thought.. I wonder if he's still making these. Glad to see your getting better and better! Investing equipment into the company. Super happy to see.

It’s great to see someone that truly knows what they are talking about! Your videos are an absolute gift. 🙏

The Stay Sharp guide is really good, but sharpening those VPAs is a very time consuming process, imo sandpaper does very little, I invested in a set of Diamond plates from DMT, but even with the 325 it takes hours to get a usable edge.....

Just ordered from you guys. Thanks for the guidance when it comes to sharpening these!

You are the man Ron. Thanks for another great video.

Excellent job once again on getting a broadhead to an incredible level of sharpness. Additionally, thank you for highlighting the Broadhead Connection - it seems like a good resource for persons seeking to try a head out before committing to a large outlay of money.

Great job, Great instruction on technique of sharpening, Great information!

I cannot. Cannot get a freakin burr on these things. About to sell them. Using your 35 degree jig (factory bevel is closer to 40) but I absolutely can’t get a burr to form.

Great video for ease of use of the guides and also the quality of the VPA’s! Very informative, Thanks!

Nice product and video,thanks

very informative and great instruction!! well done

would you be willing to sell the stl file for your guides? i have a printer, and could come up with something very similar, but figured i'd pay you a little for the file vs just re designing my own.

Great video! Just ordered a 35 degree guide

I have one of your other sharpeners and have been very satisfied.

We need more fact based testing like yours. Great job.

Great stuff Ron!

Thank You This is just what I needed. I have your other sharpeners and they have been awesome. Thank You

I have trying to modify your roller sharpeners for these new VPA single bevels. Now I don’t have too! Will order one today. I’m sure they will come out with 250 and 300 grn.

Great video, where did you get the 35 degree guide and roller? I just received my 200gr heads from VPA and want to sharpen them like yours.

I purchased the VPA 35-degree guide and find it impossible to get a razor-like edge. It will get "polished," but the edge is not as sharp as it should be. I am sure most of this is due to my "use" of the guide; however, I follow this video to the tee and am perplexed as to why I cannot get this sharp. Is there anyone who can help coach this old guy on how to make the best of this? Thank you.

I noticed that in this video you mentioned Hornadys One Shot CASE lube but in the link to other site that shows testing the product is Hornadys One Shot Gun Cleaner and Lube. Are these two products similar enough?

This is so cool,love it

Nice video. I like VPA stuff also. Do you worry about odor from the rust preventatives?

Could I use this guide on my cutthroats instead of putting 35" of tape on my single bevel guide?

You make this look too easy. I bought your jig and the sandpaper and cannot get a Burr. Jig works well, I'm trying to Sharpen 300 grain VPA single bevels. Im really struggling!

What grit sandpaper would you have started with if you had shot into target? What about an animal?

good video as usual. can u do a video on your broadhead collection and how you made your little metal clips to hold each arrow stub? that would be real interesting. thanks innovative

Ron, do you break the burr off at the end of the last grit? Or do you break it off at the end of each grit you use?

Do a video on the simmons sharks..see you have but you did not show how u did....I bought ur c jig just for simmions heads

I just started using your 35 today. On one of the levels it's not lieing flat. Should I just keep working it until it is? I colored it with a sharpen and it's not getting it to the edge. Any suggestions?

Hi there just found your channel and man you know what you doing. I'm here in South Africa and would love to get hold of this sharpening tool, do you have a website where I could order one? Thank you for a great channel

I’m having trouble getting a burr with 2500. I went down to 2000 for a long long time (2 full sheets of 2000 grit) and still couldn’t get a burr. Is it even possible to detect the burr at that grit with the post it note? I had a burr at 1200 for sure. It’s pretty sharp but not shaving hair sharp so I’m just trying to figure out what to do to get that final level of sharpness. I did strop it for a long time with the compound too just in case and it didn’t seem to change it

I went with these heads and your sharpening guide. After working on two. I noticed after getting the sides extremely sharp. The front where the two sides form the "tip" was flat across like a screwdriver and did not come together to a sharp edge. How should I address this?

How do you keep track of how much material is removed from each side so that balance of broadhead is not uneven? Thank you.

How sharp is the tip where the two edges meet? How sharp should it be?

I finished my Cutthroats with a 10,000 grit before stroping. Just because.

Do you ship to uk

Would you recommend with these broadheads starting out at a low grit to start? Or a medium and go to 2500

After the strope do you flip and remove any burr? Great video!

Think that's why they are heavy to be reused over and over over over over over over over over over over over over over over over over over over again 😆