Let's compare arguably the two best locally available BUDGET table saws in the market today in the Bosch GTS 254 and Lotus LTST1800X. Which one should you get? Here's my two cents on that topic! #DIYweekends
Пікірлер: 84
@DRCE7772 жыл бұрын
I first learned about woodworking since the darkest days of lockdown here in the Philippines and have created several very satisfactory projects since then. For a table saw, I have to say the fence is one of the most important parts of a table saw.
@The-Master-of-None2 жыл бұрын
Lotus user here. My main concern about the lotus ts is the table itself is not flat. And that cause me to have some imperfect cuts.
@karolinaopaczynska756211 ай бұрын
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzfaq.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
@chobibitv76702 жыл бұрын
when i see this video. i already know that someday this guy would be reach more subscribers. honest review strght to point. hello im from cebu also a woodworker keep safe bru! 🙏
@allibrero2 жыл бұрын
I was almost dead set on getting the Bosch. Thank you for the incredible helpful info and making me think twice.
@SherlynDoloriel2 жыл бұрын
Thank you so much for the review. I’m so excited to buy one.
@dionirvingtimbang52122 жыл бұрын
Dami ko na encounter na nag kaka problema agad ang motor ng lotus. Sa bosch wala pa
@arnoldnaval88422 жыл бұрын
Yah i read a lot of issue of lotus motor.. the only flaw of the bosch is the sliding platform w lotus have.. but i saw one from a foreign carpenter did an addl DIY sliding platform thatbwas attached to the right side
@transkierockrose6370 Жыл бұрын
nice but..... you have not discussed motor speed, blade quality, cut timing and build quality which would really bring out the performance of the two
@carissatopacio58112 жыл бұрын
Nice video. Very detailed. I wish you could also make a video review for the Stanley SST180.. budget table saw of Stanley.
@macmund2 жыл бұрын
tHanks I did not expect your verdict on the lotus but points are well explained.
@harmonikaph20372 жыл бұрын
Nalilito na ko hahaha 💪💪
@jimmyboyles39722 жыл бұрын
The best review sir..
@fernandoracca61292 жыл бұрын
Nice review po! Pareview nga rin po ung ingco ts15008 table saw nila. Tnx po
@manuelprado21132 жыл бұрын
Have you mention the grilling function of the Lotus?
@elinorsemira2 жыл бұрын
Awesome review!!! 👍👍👍
@danielfernandeznungaray8996Ай бұрын
Well explained. Are these better than Stanley 1801?
@jonelpeteragustin8242 жыл бұрын
Very helpful thanks
@smuiv78092 жыл бұрын
I still have my lotus TS, it's a good TS, still working love that sliding miter. Loud as hell, reason I bought another TS, but couldn't part with it, go figure.
@jeshua091819872 жыл бұрын
hi sir can you please make a comparison video of these table saw with the Skil jobsite table saw TS6307-00? thank you.
@ghalietilab92572 жыл бұрын
Sir, may I ask about the performance of motor?Thanks!
@ridha3248 Жыл бұрын
Thanks 🤝
@jebbdomingo91732 жыл бұрын
Please review Ingco table saw
@ruelestrada8836 Жыл бұрын
Hi, nice review... Is Lotus has band saw?
@edvelhagen Жыл бұрын
Can you do a review on super budget friendly powerhouse table and miter saws? There are hardly any reviews about powerhouse.
@POLYGONWOODWORKS882 жыл бұрын
Very nice review...
@megsman4749 Жыл бұрын
meron ba blade wobble yung Bosch kagaya ng sa Lotus. Correct me if I'm wrong but that would be the difference between an accurate and straight cut vs. a cut na parang circular saw gumawa.
@HiAtLiTV2 жыл бұрын
Well said po.. Thanks sa clear review and update.. New friend mo po sir from TK. 😊 GOD BLESS ❤️
@hjchin132 жыл бұрын
Lotus has micro angle blade adjustment, i don't see this feature in bosch.
@kdramahome74272 жыл бұрын
Hi sir. Where can i buy lotus table saw online?
@user-uw5qr3ni6q Жыл бұрын
What about the motor power of each?
@orlandogrimaldo51712 жыл бұрын
sir saan po pwde bumili ng lotus table dto sa manila?
@anhb42032 жыл бұрын
The moulded switch guard can be 3D printed for the Lotus.😁
@megsman4749 Жыл бұрын
do you have a plan? or where can I get one? Thanksl
@Catknapsack2 жыл бұрын
The sliding platform wins. Sa bosch you need to spend 30+ for to enjoy that feature...
@fourtheboys962 жыл бұрын
These are brand new items. Which do you think will last longer? Which has a better build, uses better materiasl (i.e. not plastic) especially in the moving parts? Appreciate your thoughts.
@TomsCornerph2 жыл бұрын
If you add Stanley sst1801 (another budget option) in the scrimmage, which would you choose?
@VincheroKarpintero2 жыл бұрын
No experience using the Stanley but just based on what I've seen in stores, I'd still go with the Lotus for the amount of features it brings at this price point.
@franceworld64552 жыл бұрын
Hope to win that...
@EveryDIY2 жыл бұрын
Review marathon...
@rosseltalisaysay50392 жыл бұрын
Sir, can you make separate video how to calibrate the blade for the lotus. Salamat.
@VincheroKarpintero2 жыл бұрын
I did. Here: kzfaq.info/get/bejne/is55lNul0qi7pac.html
@albertovazquezzavala96136 ай бұрын
Where can I find Lotus table saw because I can´t find it.
@amanteamante3582 жыл бұрын
dewalt at lotus pinagpipilian ko sir,mejo nadidismaya ako sa bosch lalo sa gts254
@jaysonbenigno15312 жыл бұрын
Sir lotus vs stanley naman
@leinahr2 жыл бұрын
Lotus is the best?
@therandomcarpenter68102 жыл бұрын
Ilan ang kapal Ang kaya niya sir?
@kininarimasu142 жыл бұрын
Quick question sir, you mentioned you used to own that Lotus model. What made you sell it? Would you recommend it for a budget-tied beginner woodworker as a first tablesaw? Thank you for your inputs and god bless!
@VincheroKarpintero2 жыл бұрын
I actually already owned the DWE7480 when I got the Lotus table saw. I wanted a 220v table saw because my DWE7480 was 110v. I quickly realized that I didn't have room for a 2nd table saw in my small work area so I sold it. Yes, I would recommend the Lotus as a budget option for beginner wood workers.
@orlandogrimaldo51712 жыл бұрын
@@VincheroKarpintero sir will you recommend where to buy lotos table saw thanks
@aldrinalejo18102 жыл бұрын
Lotus ..Pinoy brands Ipagmalaki natin❤️🇵🇭
@haileyArevan71762 жыл бұрын
So lotus is the winner..i plan to buy gts 254 but whe i watch your disadvantage between to unit now i was confused about the gts 254..how about gts 10xc..? Can you give me idea which table saw is good with the same price as boscht gts 254..thanks new subscriber
@VincheroKarpintero2 жыл бұрын
Here's a video on the 4 best table saws in the Philippines as of time of making the video kzfaq.info/get/bejne/faphjdZ2qtmZh6M.html
@realtough-0q3952 жыл бұрын
Pwede ba mag lagay dado blades sa lotus?
@janardhanreddy9103 Жыл бұрын
Cost please. Phone number
@Ritcheyyy Жыл бұрын
I bought bosch in Slovakia last week and the blade was off few degrees, so not so great Q control from china...
@jrpcreatives2 жыл бұрын
Lotus in my view wins for this comparison
@JT-gq1sm2 жыл бұрын
hey bro 😊 me again.. need your help for the 2nd time.. nga pala i got my lotus saw horse and you're right medyo heavy duty feels siya ok na ok sa akin 😊 looking at beginner ts this time.. bosch user here pero parang mas good si lotus dito sa review mo.. ive seen your other 2 videos with regard to lotus.. my heart is with bosch pero "MAS" yata si lotus dito sa battle na to 😊
@VincheroKarpintero2 жыл бұрын
Yes, between these 2 models, I think you get more value from the Lotus. If you are already a Bosch user, I suggest you look at the 10XC or consider the Dewalt DWE7492. I have a video on that too.
@JT-gq1sm2 жыл бұрын
@@VincheroKarpintero Thanks bro 😊 will go for the Lotus muna medyo pricey pa yung 10xc.. cheers Man!
@JT-gq1sm2 жыл бұрын
@@VincheroKarpintero hey bro Happy New Year 😊 me again, with regard to Dewalt TS, very good ba AFTER SALES/SERVICE CENTERS nila dito sa atin? thanks much!
@VincheroKarpintero2 жыл бұрын
@@JT-gq1sm I'm afraid I can't really comment on how good the service centers are because I've never had to have any of my Dewalt tools serviced. ;)
@JT-gq1sm2 жыл бұрын
@@VincheroKarpintero nice! any recommendations where to check on Dewalt TS? or san mo nabili yung Dewalt TS mo?
@prasanth98012 жыл бұрын
Price
@VincheroKarpintero2 жыл бұрын
...is right!
@micc.87802 жыл бұрын
Sir legit ba ung mga 10k + na price sa mga nagbebenta sa lazada?
@VincheroKarpintero2 жыл бұрын
Sounds about right
@micc.87802 жыл бұрын
Thanks idol. Nagulat kasi ako pumunta ako wilcon kahapon, 20k ung table saw daw. So kala ko di legit si lazada.. thanks sir
@choykage262 жыл бұрын
Palag palag ang lotus. Haha
@user-uw5qr3ni6q Жыл бұрын
The Truth to the matter is, it all depends on the woodworkers skills! Tools are operated by the worker...
@Enchanted3DPrints2 жыл бұрын
that bosch is almost 600 bucks. Is that budget?
@VincheroKarpintero2 жыл бұрын
Are you talking USD? Over here it's USD300 so if it's USD600 over there, I would definitely walk away. The GTS254 is NOT worth $600 in my opinion.
@kustomartstudios97332 жыл бұрын
Lotus wins on this
@zholhutakhesoh3657 Жыл бұрын
Now I got it. I just watch the other video where you did a review about the Bosch saw. You were actually paid to put a negative impact on the Bosch brand. Guys don't trust this guy. If you think you want to buy the Bosch brand saw, just go for it. No machines will come perfect.
@rolandsebastian5132 Жыл бұрын
In Reality Bosch 254 is the Winner for the Diy Portable Saw..
@VincheroKarpintero Жыл бұрын
Realistically, can you elaborate why you say this? 🤔
@legoscro8635 Жыл бұрын
I bought a gts 254 a few days ago. the worst thing I bought in my life. the entire work table is uneven, of course the saw cannot be adjusted to 90 degrees. the insert plate is terrible, because it cannot be lowered into its space. horror and disappointment in a company like Bosch. and to make things even worse, the explanation of the gentlemen from the service is that it is not covered by the warranty because "it must have fallen", there is no other explanation for the unevenness of the worktop
@chrisgonzales1262 жыл бұрын
Not a real review, more of a "First Impression" unboxing video, dapat kasama sa consideration mo is the DURABILITY of the tool. Plus halata naman na Subjective review since Lotus Brand Ambassador ka. Marketing video lang to.
@VincheroKarpintero2 жыл бұрын
To be clear, I am not under any contract at the moment with Lotus nor am I an ambassador. Unless you know something I don't? Chris, are you my manager? How much is Lotus paying me at bakit di ako naambunan? Chris? Chris? Chris, please, sumagot ka...
@bakitganun72882 жыл бұрын
@@VincheroKarpintero I see this as a very objective video. Testing ng durability I think is not possible for power tools. Unless gusto mo ng gimik na ibabagsak mo babasain mo o ganun. Pero this review is very good.
@normangabrielgumba34442 жыл бұрын
I own a GTS 254 but dont see any issues here and found the content objective. Not sure why people try to downplay such content and try to paint it as a marketing video where clearly the goal is to help inform 🤔