VTEC Just Kicked in Yo - B20 VTEC CRV - Fix VTEC in your car

VTEC Just Kicked in Yo - B20 VTEC CRV - Fix VTEC in your car - Mod my CRV

Рет қаралды 3,710

Күн бұрын

How to Fix Variable Valve timing in you car (vtec)
7 Color Oil Pressure Gauge 0-140 PSI Oil Press Gauge Meter 52mm 2-1/16" LED Backlight Black Oil Pressure Meter with Oil Pressure Sensoramzn.to/47iHvxD
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.* Thanks For Watching and Please Subscribe kzfaq.info_c...
This Song was Downloaded Here www.epidemicsound.com/referra...
Royalty Free Music Provided By Epidemicsound
Contact Me At:
Facebook: / thelatemodeltech
InstaGram: / thelatemodeltech2.0
Pinterest: / thelatemodeltech
________________________
DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
As an Amazon Associate I earn from qualifying purchases.
(paid link)
For sponsorship, product reviews, and collaboration, you can email me here: thelatemodeltech@gmail.com
________________________
#TheLateModelTech #crv #b20vtec
00:00:00 dumpster dive
00:01:44 Recap
00:03:33 pull camshafts
00:03:52 Missing Vtec pins
00:04:50 torque mount & gauge install
00:05:46 Road Test
00:06:29 Off Road Test

Пікірлер: 44

@nobodynoone2500 11 ай бұрын

Still lookin for a cheapish vtec head to do this. Got a spare ecu and everything. Good catch, I'll buy whoever spotted the missing vtec pin a beer!

@fumbulz60 11 ай бұрын

Glad that's working better and the oil pressure is much higher. I might have to start looking for a CRV like this. 🙂

@Donnythelatemodeltech 11 ай бұрын

Much appreciate the help!

@AndToTheRepublic4WhichItStands 9 ай бұрын

Hell yeah man keep up the awesome crv videos!

@therealNebruz 11 ай бұрын

Nice. That pressure is looking way better and the vtec is sounding much stronger also.

@Donnythelatemodeltech 11 ай бұрын

Thanks again Brother. I would of never pulled it apart if you didn’t say something. It runs a little stronger . Not sure what’s next with it, any suggestions?

@therealNebruz 11 ай бұрын

@@Donnythelatemodeltech I’m not sure what your plans for the build were. Seems like just a vtec mod in a CRV is a pretty decent upgrade. Maybe exhaust system and see how much power you can make on a dyno?

@Michal_S0L 9 ай бұрын

@@Donnythelatemodeltech if you don't boost then 421 header for more flow, either way bigger tb port matched for more air. I did a tiny bit of research and found that people have done epoxy block fills or block guards to help prevent cylinder cracking with constant high rpm use or both with boost. water will be warmer doing it as a downside

@idontknow.1514 11 ай бұрын

Still planning on doing this to my crv. But currently waiting on a title for my other car. Every time you upload a new crv vid I start looking at parts n shit 💀

@Donnythelatemodeltech 11 ай бұрын

Lol, I’m thing about headers, but still would like to turbo it, not sure what to do.

@hypedupdemon 11 ай бұрын

Making me miss my CR-V already 😢 Love the videos though keep ‘em up!

@Donnythelatemodeltech 11 ай бұрын

Much appreciated!

@nobodynoone2500 11 ай бұрын

I've missed every 88-01 integra/crv/civic I've ever sold. They just don't feel right anymore without the wishbone suspension.

@quickspoolgarage 11 ай бұрын

Nice score on the trolly motor! 👌

@Donnythelatemodeltech 11 ай бұрын

DDD 👍

@doubleclutchin6860 11 ай бұрын

Good thing one of your subscriber pointed out what's missing. I'm not a Honda boy so I wouldn't catch that bro. Awesome video of your CRV rally. 👍

@Donnythelatemodeltech 11 ай бұрын

Thanks brother. Get that fuel pump figured out?

@doubleclutchin6860 11 ай бұрын

@@Donnythelatemodeltech I haven't started it yet. I want to buy the part first.

@leetran118 11 ай бұрын

Nice video 👍

@Donnythelatemodeltech 11 ай бұрын

Thanks 👍

@jonathansantosdeleon9690 7 ай бұрын

Nice…i need a basemap for the same set up.any link?

@justinrodriguez176 10 ай бұрын

I eventually wanna do little things like this to my 97 crv to get a bit more power

@aexiy 7 ай бұрын

did you ever install new rod bolts?

@Jason-nk4yr 11 ай бұрын

Good for you

@Donnythelatemodeltech 11 ай бұрын

Good for me

@Michal_S0L 9 ай бұрын

A month later and i finally found a gsr head with the manifold like your integra. Yes extra steps to wire for secondaries, But I learned the gsr head has more torque. The low end runners also give you low end torque, I want torque with 235 tires also just the weight of the crv when going camping what ever. For your plans b16 makes more sense. Btw the flat out suspension rally suspension i told you about a while back is legit they aren’t stiff and you can adjust them properly to get good handling for rally style driving. But I’m not spending 3k Canadian on suspension for this turd I mean unless extremely successful dumpster dive happens lmao

@Donnythelatemodeltech 9 ай бұрын

Lol, definitely a good plan. I do agree the gsr head is the way to go. It should be really really fun to drive. And yeah , still looking for that pile of money in that dumperster would help!

@dstorm19 8 ай бұрын

I can't wait to slap this GSR head on my CR-V. Are you ready to go DigiDizzy on that beast?

@Donnythelatemodeltech 8 ай бұрын

Oh hell yeah!

@joseverdejo9010 3 ай бұрын

B20vtec in a crv with awd & 5 speed should have been a high trim option they dropped the ball there

@liyfii 11 ай бұрын

is adding vtech to my 1997 honda crv worth it ?

@Donnythelatemodeltech 11 ай бұрын

My CRV is just for fun, so hell yeah it’s worth it to me.

@nobodynoone2500 11 ай бұрын

For the money to power ratio, not really anymore. Hard to find cheap vtec heads that aren't iffy, and I'd really have it decked with new valves and guides. Better off with a k-swap or possibly even a _small_ turbo if looking for more power. I still love the b-series, so I'd still do it. All about money, access to parts, and motivation. Also the b20b has lower compression than the later 99-01 b20z, I think it was the piston height, so theres that.

@liyfii 10 ай бұрын

@@nobodynoone2500 its got 54k original miles on the car. I guess turbo would be the way to go ?

@dannyjr7997 9 ай бұрын

Yes at 54k original miles and well maintained boost it to around 260whp would be safe and fun. Best of luck.

@dr.mantistoboggan4746 11 ай бұрын

Any reason this can't be as reliable as a stock B18C?

@Donnythelatemodeltech 11 ай бұрын

It’s not stock, any more.

@dr.mantistoboggan4746 11 ай бұрын

@@Donnythelatemodeltech I guess I mean B20Vtec vs B18C any weird cooling or oiling problems long term from using a non vtec block? Vtec engine blocks come with oil squirters. Any idea where your compression ended up?

@CaptainTexas92 11 ай бұрын

B20’s are open deck design and weren’t designed to rev to the ceiling if you lock it out to 7.5k rpm’s and keep fresh oil in it they do last. But you are fighting design.

@nobodynoone2500 11 ай бұрын

@@CaptainTexas92 Being open deck is not relevant here, thats turbo land, and the b20 sucks there because of the thin cyninder walls, needing sleeves to go big. The rpm limit of the b20 is due to piston speed, as a result of the longer stroke crank compared to a b16 or b18. You may be able to remedy this with lightweight aftermarket pistons and rods. It's plenty reliable when tuned well and built right. The b16/ITR (same casting) VTEC heads bump up the compression compared to the dohc heads iirc. There should be no oiling problems, although the b20 lacks the itr/gsr oil squirters that are nice for turbo use, so does the b16a iirc, and it does fine.

@CaptainTexas92 10 ай бұрын

@@nobodynoone2500 not to sound like a jerk but it is relevant, the B20 is open deck, has a long stroke, paper thin Siamese cylinder walls, and insufficient piston cooling. This engine was built to make more low end torque than the d and other b series engines for family movers. Can you resleeve the engine to strengthen it? Yes. Can you run forged internals to keep piston temp down? Yes. But most people I see building b20vtec engines just slap a blox racing head gasket and a Vtec head then send the engine to the moon. On stock internals with a Vtec head pushing past 7.5K is a recipe for a cylinder wall failure. I’ve seen cracks, chunks, and oval shaped warping. It’s not a budget friendly engine for boost or a high revving Vtec.

@Michal_S0L 10 ай бұрын

You still running the xtd clutch? Mine is not great now and judders

@Donnythelatemodeltech 10 ай бұрын

Still the eBay clutch. Hope it lasts forever, lol.