VW & Audi Rear Electronic Brake Caliper Rest, No SCANNER Need it , Brake Pads & Rotors replacement

No video

VW & Audi Rear Electronic Brake Caliper Rest, No SCANNER Need it , Brake Pads & Rotors replacement

Рет қаралды 56,708

Күн бұрын

Audi A6 , VW Jetta, Passat & some others models has rear electronic emergency brake system and when ever you wanna replace the pads and rotors you need to have a advance scanner to be able to reset the caliper, but in this video i am going to show you how to replace pads and rotors and rest the pump without having expensive scanner,
in return i will ask you if you can smash the like button and subscribe to my channel and turn on the bell icon so you can get notify when i release new videos like this

Пікірлер: 111

@SupercaliSooner Жыл бұрын

By far and away the best video on how to bypass the EPB without a scanner tool.

@Matthewjo22 Жыл бұрын

Thankyou so much

@laalmen24 7 ай бұрын

I bought an over $300 scanner to fix it but it didn’t work. Thank you God I found your video and it really helped. Able fix my 2019 VW. God bless you

@Matthewjo22 7 ай бұрын

God bless you to mm my pleasure

@howiesiesoosoo Жыл бұрын

Just an addition to an excellent tutorial - be prepared to check the brake master cylinder fluid level before pressing the slave cylinders back into the calipers. If the master cylinder is already full, you'll have brake fluid all over the place in the engine bay! A suitably placed absorbent rag will generally do the trick.

@Matthewjo22 Жыл бұрын

thanks buddy

@oldchev2850 Жыл бұрын

Or suck a bit out with a big syringe but yes, good point

@2facethevillin Жыл бұрын

I really appreciate you for this video. I have never… EVER changed brakes. I was able to do myself with your video. I have a 2021 Jetta. Everything was accurate to the T. Thank you! FYI I took the top off the cap and put shop towels around the master cylinder, and no issues with brake fluid leaking out. It was still full after doing both rear brakes and rotors.

@Matthewjo22 Жыл бұрын

My pleasure

@philboros860 3 ай бұрын

Thanks for this, i watched a couple of other videos but these left a couple of questions. Your video is very straight forward and accurate with its details and explains everything well.

@Matthewjo22 3 ай бұрын

Thank you so much man, really appreciate it

@pddpdd1462 11 ай бұрын

Thank you so much for the video. You don't need a special socket to turn the caliper, I did it with a plier. For those who wants to DIY the rear breaks, make sure to release your parking break first. When you are done changing the breaks, do a parking break functional test.

@alexpage8965 7 ай бұрын

I was wondering about this. Can you simply chock the wheels and leave the parking brake disengaged and not have to fiddle with the ebrake pump?

@senyxv 9 ай бұрын

Great vid! You don't even need to remove the servo motor. Just power it with a 9V battery until it enters "service mode", i.e. releases parking brake fully and keeps spinning. I've done that many times.

@Bradley73n 6 ай бұрын

How do you do that?

@senyxv 6 ай бұрын

@@Bradley73n Unplug the connector and use a battery with two crocodiles in silicone to connect to the pins inside the connector. Be careful not to short the leads while touching the pins.

@gprice5640 Жыл бұрын

I knew there had to be an easy way. Thanks for the tip.

@Amir-z2 5 ай бұрын

Great tips brother, that’s what I’m looking for, Can’t wait to see your next video

@catrachan 7 ай бұрын

Great video! Just what I needed, I want to change the rear rotors and was wondering if I could do it without removing the carriers, thank you for showing it IS possible!

@Matthewjo22 7 ай бұрын

Glad I could help

@JBsPhotos Жыл бұрын

Very Impressed with you! Excellent, easy to follow video!! Thank You !!

@Matthewjo22 Жыл бұрын

My pleasure thanks for comment

@Bmac2008 Жыл бұрын

Some ceramic high temp grease on all metal surfaces that contact each other will save you headaches down the road. Not to mention keeping the squealing and squeaking from happening.

@tomconner5067 11 ай бұрын

👍🏼thanks, thats what I thought the procedure was, couldn’t recall.

@Matthewjo22 11 ай бұрын

Your welcome

@AlhuseinH89 Жыл бұрын

Great video, followed every step and got great results. Thank you saved me 700+

@Matthewjo22 11 ай бұрын

No problem my pleasure

@scyth625 2 жыл бұрын

Thanks for the vid. One of the better ones on this topic. However when backing off the EPD motor is there a procedure to reset it or does it reset automatically?

@Matthewjo22 2 жыл бұрын

hi thank you so much, i am not sure i understand your question very clearly but when you turn it to rest it you are able to fit the brake pad in and after you put everything back together, after starting the vehicle and press the brake pedal couple time, brake goes back to the place it suppose to be, i hope make sense thanks

@keangfamily Жыл бұрын

You have saved the car owner’s life.

@Matthewjo22 Жыл бұрын

How?

@oldchev2850 Жыл бұрын

@@Matthewjo22I think he means the pads were nearly steel on steel

@villel6542 5 ай бұрын

Bro just use 9v battery and 2 pieces of any cable to drive the electric motor. It's dead simple dc motor like the lego engine. No need to pull anything apart.

@21blacktooth 4 ай бұрын

When you put the electronic parking brake motor back on do you first have to close the piston with a ratchet? Or do you just bolt it on and reset with the parking break button?

@Matthewjo22 4 ай бұрын

Just make sure it seats properly and put the screw back and tight

@21blacktooth 4 ай бұрын

@@Matthewjo22 Thanks for the quick reply. I just ordered my new rotors and pads and am glad I found this video.

@isalmankhan1 2 жыл бұрын

Great work👍 I'm a new subscriber really enjoy your work, keep up the good work Bro, Stay Safe👍

@Matthewjo22 2 жыл бұрын

thank-you so much brother welcome to my channel

@daveshongkongchinachannel 8 ай бұрын

Great video but one thing you didn't do was to clean the new brake disc. New discs usually have a protective coating to prevent them from rusting in storage and this can contaminate the new pads if you don't clean it off first. Also you left dirty fingerprints on the disc. I'm guessing a small amount of grease and dirt will just burn off with use and maybe that's also true regarding the protective film but better to just clean everything to make 100% sure there will be no issues.

@juanangel9818 7 ай бұрын

Thank you buddy your so smart 🙏

@timmygrafilo7265 11 ай бұрын

thanks a lot for your informative videos'. if it is possible to upload about toyota corolla 2022 rear electronic brake . thanks

@Matthewjo22 11 ай бұрын

Sure I try that

@TannerForster 4 ай бұрын

Is this video going to be identical to the 2023 Jetta do you know? Wasn’t sure if the back of the caliper where you take the two bolts out and do the reset would be similar or different

@Matthewjo22 4 ай бұрын

Yes for any any other brands to not just vw as well same method

@zachramacci1625 7 ай бұрын

Does this also work on Audi’s? I have a 2021 Q3. I am fairly certain it’s the same but just wanna make sure.

@Matthewjo22 7 ай бұрын

I think it is

@Airedales5 Жыл бұрын

Excellent video, thank you.

@frankcrow4594 11 ай бұрын

That was a great video. now I can do my brake’s. Thanks

@Matthewjo22 11 ай бұрын

my pleasure

@Sup3rman198689 Жыл бұрын

Does work for a 2019 Volkswagen Tiguan? If it does. My guy thank you so much for this insight. I watched so many videos and every one has the super expensive monitor scanner that does that for you. I definitely don’t have $500 to buy that special tool. Really appreciate your insight.

@mikeball6775 Жыл бұрын

Im hoping it's the same also

@cedric6368 5 ай бұрын

Yes. Not sure if keeping the caliper bracket on when removing the rotor works, but I will try on my next brake job. Kicking myself for not attempting that.

@nikialekssandrov 9 ай бұрын

If you change elecrtic parking brake do you need to code the new one ?

@shaunadams3170 2 жыл бұрын

i wonder if you could use a multi probe and reverse the polarity of the motor so you dont have to remove it from the caliper?

@Matthewjo22 2 жыл бұрын

I do have a advance scanner but I didn’t use and another thing you can do back pin installed it as long as you know the wiring integrity, you don’t want creat another problem For me this method works well and is easy to do

@shaunadams3170 2 жыл бұрын

@@Matthewjo22 yes I do have a shop level scan tool, but there are time when I'm not in my service truck and may need to help someone orr pick up a job on the way and having multiple way to make a quality repair is very valuable. Thanks for the video.

@Matthewjo22 2 жыл бұрын

@@shaunadams3170 All-right no problem man take care

@shaunadams3170 2 жыл бұрын

@@Matthewjo22 yes sir will do, as soon as I finish up the trailer tongue replacement on this trailer and get a blower motor and resistor job finished (waiting on parts), I'll be done for the day. Maybe

@ardisohrabi8245 8 ай бұрын

@@Matthewjo22 i agree. it's a lot safer.

@macgyver5108 11 ай бұрын

1:35 AHH yes, the "manual" impact wrench! I know this tool well! 😁

@Lehmann108 Жыл бұрын

Shouldn't you rotate the caliper piston as it's pushed back in?

@mahdijo6319 Жыл бұрын

Doesn’t need

@AgentOffice Жыл бұрын

I think needs

@cy_young_9104 Жыл бұрын

I was wondering the same thing because the EPB is set at a certain position before the reset. That’s the while reason it needs to be reset. I would think you would have to set it back to that position after the reset.

@user-xe5mf3nd6o 15 күн бұрын

Do you know if this will work on a 2016 Audi q3?

@Matthewjo22 15 күн бұрын

@@user-xe5mf3nd6o yes does

@user-xe5mf3nd6o 15 күн бұрын

@@Matthewjo22 going for it this weekend

@dizdewd777 Жыл бұрын

Name of special tool for reseting the piston?

@ioanamarioarei5239 9 ай бұрын

Hello, you do a very good job. I changed the brake discs and pads on a similar car, but I didn't turn that brake piston allen, I just pushed the caliper piston, did I break something? Thank you.

@KH-qy7fm 8 ай бұрын

Did the vehicle have an electronic handbrake? If it did, I don’t know how it would allow you to push the caliper back. If no e-handbrake then you should be fine.

@ioanamarioarei5239 8 ай бұрын

@@KH-qy7fm The car has electric brakes, and after I changed the brake pads + discs, they work correctly, but I don't know for how long. I saw the movie with you after the change. The caliper piston went hard.

@KH-qy7fm 8 ай бұрын

@@ioanamarioarei5239 Is your e-brake working now? If it is you should be fine.

@ioanamarioarei5239 8 ай бұрын

@@KH-qy7fm I did brake tests and everything seems to be working properly. Thank you for your replies. I will follow your instructions carefully in the future.

@KH-qy7fm 8 ай бұрын

@@ioanamarioarei5239 👍🏻

@technerdgaming9259 Жыл бұрын

Would this work for a 2022 VW Taos? I was told that I'd have to take it in to a dealer cause the caliper was operated by a computer and it would cost me $1200 for just pads alone which I think is BS! But I could do it myself for less than $300 with this method if all is the same.

@Matthewjo22 Жыл бұрын

Yes

@AgentOffice Жыл бұрын

OBDeleven will do it

@SurprisedBurrito-ks7bw 3 ай бұрын

Will this work on front and rear Audi Q7 4m+

@Matthewjo22 3 ай бұрын

yes, all models has same design it is the same proses even some Toyota are same

@SurprisedBurrito-ks7bw 3 ай бұрын

Heck yeah thank you bro, you really saved me, I was looking for a way too do this without the scanner tool and you came in clutch! Thank you 🙏🏽

@Matthewjo22 3 ай бұрын

@@SurprisedBurrito-ks7bw I am glad

@kiboendo3146 Жыл бұрын

At the beginning, you say that this car is not a regular car like Honda or Toyota. You should know that the Honda Civic has had electronic brakes installed as standard since 2016. Basically, all car brands have been installing such rear brakes as standard in recent years.

@matiasdiazduran5806 Жыл бұрын

Hey did you try your e-brake to check if it works after doing it?

@Matthewjo22 Жыл бұрын

Yes they work perfect

@matiasdiazduran5806 Жыл бұрын

@@Matthewjo22 Good to know! Will try on my Tiguan. Thanks for the video!!

@danielnava3879 Жыл бұрын

Mine doesn’t I didn’t accidentally engage it or anything and now I’m getting this code on my front dash I did the same thing you did

@khenao07 Жыл бұрын

Did you ever find out what the socket used to reset the caliper was called by chance?

@Matthewjo22 Жыл бұрын

i think is 40

@stevenrook1477 Жыл бұрын

I think it's a female torx socket

@2facethevillin Жыл бұрын

Is it not E12?

@jacksonshiburi8696 Жыл бұрын

On point 👌🏽

@lrs9911 Жыл бұрын

thank you

@iztheterrible Жыл бұрын

EZ Peezy !!!

@tctunerky 5 ай бұрын

When did they make 2021 a 2.0 Jetta?!?

@raulalonso8700 Жыл бұрын

Hi, I recently switched out the brakes on my Volkswagen CC. The EPB was engaged accidentally while the caliper was loose so the piston shot out at full length. It wasn’t to hard to muster it back in after following this tutorial but after putting everything back together, I’m getting an error message and a beeping noise when engaging the parking brake switch. Any idea what this is and how to fix it? Thanks a lot!

@karli3031 Жыл бұрын

Did you ever figure that out?. Same happened to me. Since no one responded I was wondering if you fixed it and how? Thank you

@raulalonso8700 Жыл бұрын

@@karli3031 Yes I fixed it in this case it was just a loose connection between the EPB and the car. I got underneath and tightened the cable into the parking brake and it was fine. What seems to be your issue?

@karli3031 Жыл бұрын

@@raulalonso8700 siezed up and now one side is 1300 at dealer to fix. Sucks

@chinconcuac2003 8 ай бұрын

Hello, this job is same for Q3 2021 ? 2.0 t

@Matthewjo22 8 ай бұрын

I think it is just double check online but most of them same prosess

@kikokabayanable Жыл бұрын

Is this the same as the passat?

@danielmiller4794 Жыл бұрын

You did this the hard war I just changed the brakes on my 2020 Jetta and didn’t have to do all this. And I didn’t have to reset anything

@cody4873 Жыл бұрын

You've either already damaged you caliber or got EXTREMELY LUCKY. OR you don't have an electronic parking brake. The way he did it, is actually the alternative method to using a scanner.

@danielmiller4794 Жыл бұрын

You can use pliers to turn that piston back in

@-.__.__.-Rad Жыл бұрын

not really... unless you're talking about manual handbreak

@vinceleto Жыл бұрын

Another reason to never buy a VW or Audi. Thanks for the video and info

@cody4873 Жыл бұрын

American and Japanese brands are also implementing this system with electronic parking brakes.

@vinceleto Жыл бұрын

@@cody4873 will you need a scan tool to do the brake job as well?

@cody4873 Жыл бұрын

@@vinceleto Yes. Hondas for instance have to be placed into maintenance mode

@-.__.__.-Rad Жыл бұрын

The rest of the world is doing it too; they are just "late to the game" :) This is a much better system than the cable/drum cylinders.... I remember what a pain it was to service the E-brake... How 80% of the older vehicles just didn't have a parking break because they'd rather not fix it/adjust it...