VW Beetle Trunk Seal Channel Guide Replacement - Baja Bug - HOW TO replace vw beetle trunk seals

Рет қаралды 1,587

6 ай бұрын

This week I show how to replace the VW Classic Beetle trunk seal guide rails. Its easy and no need to mig weld.
Donations to help support the video content, please click here:
www.paypal.com/donate/?hosted...
Check out the Members...Tshirts, And Apparel! Thank you!
www.bonfire.com/store/sladesb...
For A Members Quality Sticker: You don’t have to do anything special to be a member, just be subscribed to the channel & grab your members sticker! 👍🤗 They are high quality vinyl. If you want your sticker they are $4.00 free shipping in the USA ( outside the USA $5.50 free shipping) you can go to:
sladesvwbeetle.com/sticker/
My Website:
sladesvwbeetle.com
Friends Website:
www.superbeetles.com
www.allaircooled.com/
#vwbeetle #vwbug #aircooled #sladesbeetle #beetlerestoration #vwclassicbeetle #classiccar #vintagecar #restoration #vwlivechat #vwwillitrun #vwbeetlebarnfind #vwbus #vwkitcar #vwghia #vwfastback #vwstrokermotor #vwsalvageyard #vwhowtovideos #vwdiyvideos

Пікірлер: 74

@douglasbarnhart3324 6 ай бұрын

Thanks for the video Slade!! Don't burn yourself out.😁

@SladesVWBeetle 6 ай бұрын

Thanks my friend I truly appreciate that. I’m starting to heal up now,

@jennysolomon-haase9103 4 ай бұрын

I'm excited seeing red paint. The rivet idea is a great idea. Looks really nice.

@SladesVWBeetle 4 ай бұрын

Thanks very much, my friend! Always make sure to use stainless steel rivets though. So there’s no rust. I hope you have a great day.

@edrowley1 6 ай бұрын

The cooling tin install videos would be excellent! Appreciate ALL the Videos! Thank you. :)

@SladesVWBeetle 6 ай бұрын

Thank you I truly appreciate the kind comment and I will be doing the complete cooling tin install and paint

@TrixedOut 6 ай бұрын

Awesome video, as usual! I like the rivet idea because you can thoroughly paint all sides without having to go to bare metal in spots so it can be welded. It also makes it easier to remove if need be.

@SladesVWBeetle 6 ай бұрын

Hey my friend, I like using stainless steel rivets, of course, but I think it’s much easier since this is really nothing with stress on it that would need welded.

@neilallison2050 6 ай бұрын

Restoration of cooling tin video - would be cool!

@SladesVWBeetle 6 ай бұрын

I’m glad you think so Neil, I’m going to do the prep and paint work, and the complete cooling tin installation so everybody sees where the pieces go

@brianmonroemodelsports21 6 ай бұрын

glad i found your channel. looking into getting another bug, my first car was a 67 tan beetle. I mentioned fixing up a beetle to my wife who then said "I love doodle bugs" but i had to promise I would drive her around in it. thanks again for the great videos

@SladesVWBeetle 6 ай бұрын

Thank you Brian for taking the time to leave a comment and be part of it all here!! my wife likes taking rides in mine. Although I sold my last one, and the 68 currently doing will be done in May. I wish you all the luck if you need anything give a yell.

@greggbrown0 6 ай бұрын

Would love to see restoration of cooling tins.

@SladesVWBeetle 6 ай бұрын

Thank you, my friend, seems like I got a lot of feedback on that. I will go ahead and sand, paint, and do a complete cooling installation video.

@bobpuddy8673 6 ай бұрын

yes the cooling tin video would be great!

@SladesVWBeetle 6 ай бұрын

Thanks brother, I’m going to clean, paint, and do a complete tin installation, so everybody sees where all the pieces go.

@MikeMoose67 6 ай бұрын

Looks good brother Slade. Great job. Sure hope you get to feeling better soon. I can’t hardly be in the garage Working on the car when I’m sick. I’m a big baby.😂

@SladesVWBeetle 6 ай бұрын

Hey brother, hope you’re doing well. Finally starting to feel better. Whatever I had got into my chest, beat the crap out of me. About a day after that video. Oh, trust me, when I get sick I’m like a child. Lol.

@jamesperez6061 6 ай бұрын

Beautiful work

@SladesVWBeetle 6 ай бұрын

Thank you, sir! I appreciate that.

@mikelutz1971 6 ай бұрын

Yes! to the tin video!

@SladesVWBeetle 6 ай бұрын

I will definitely do that Mike, thank you so much.

@VWBEETLEOVAL1955 6 ай бұрын

a great work done again my friend. i hope you getting well soon and remember, the deadline will be soon there. overtime is ringing at the door lol. naaaah just over exited to see you work on that KG.

@SladesVWBeetle 6 ай бұрын

Thank you brother, I truly appreciate you being here all the time. Before I know it, the end of April will be here. I’m almost done being sick, so I need to get in the garage.

@greggbrown0 6 ай бұрын

Think I see one or two of Heather’s towels in there😂

@SladesVWBeetle 6 ай бұрын

Oh geeezz she’ll beat me!! 😂

@kyridgejumper 6 ай бұрын

Looks really good. I forgot about you going with red on it I was thinking Almond was the color you went with

@SladesVWBeetle 6 ай бұрын

Thanks my friend I appreciate that. I’m still going to use the almond, which kind of looks like dark cream to me. I’m doing a two-tone paint job.

@cjjones1556 6 ай бұрын

Looks good. I have to do the carpet rails along the door openings soon. Going to try my hand at spot welding them on.

@SladesVWBeetle 6 ай бұрын

Hey brother, thank you so much. I have to do the carpet rails on one side of mine. I guess I need to start using my brand new welder that I haven’t even tried yet. Just a little nervous lol that’s one thing I haven’t done yet.

@terrancemoore2035 6 ай бұрын

Good afternoon my friend. In Mexico at the moment. Wish I could snag a beetle and drive it home. Merry Christmas to you, the wife n family and the entire Slade Community.

@SladesVWBeetle 6 ай бұрын

Hey my brother, I hope you’re safe down there. I wondered how you have been doing. I hope you have a very merry Christmas my friend, I hope to see you at Jim in April.

@terrancemoore2035 6 ай бұрын

@@SladesVWBeetle I've been doing well my friend. Who knows, maybe I'll be able to break away to drive in your direction before April. Still wrestling with distributor going through condensers. Parked a running car two months ago and last week pulled it out and it died. Another condenser. WTH I have it sitting in the front yard now with the Grinch driving and his dog in the drinkers seat.

@jeffbannon1345 6 ай бұрын

Let’s see the cooling tin videos!

@SladesVWBeetle 6 ай бұрын

Yes sir, I’m actually going to do that for sure.

@jeffbannon1345 6 ай бұрын

@@SladesVWBeetle Thanks Slade!

@SladesVWBeetle 6 ай бұрын

@@jeffbannon1345 and thank you for being here, it is very much appreciated.

@user-tr1ub4br7p 6 ай бұрын

yes sir love for you to make the videos

@SladesVWBeetle 6 ай бұрын

Thank you so much I will do that.

@pstreetgarage7304 6 ай бұрын

Nice job ! I did not ffwd lol 👌👍

@SladesVWBeetle 6 ай бұрын

Thank you, my friend! I hope you’ve had a great day. I’m so excited about your bus! But sure wish I could get a ride in that Comet!

@pstreetgarage7304 6 ай бұрын

@@SladesVWBeetle 👍👍👍

@jimstewart6145 6 ай бұрын

nice job.

@SladesVWBeetle 6 ай бұрын

Thank you my friend I appreciate that.

@mrbrisket6794 6 ай бұрын

How about notching out the rubber seal by the rivet heads ? Nice job and kool idea

@SladesVWBeetle 6 ай бұрын

Thank you, sir! And, that may not be a bad idea at all. I can cut the sill around the rivet. I like it.

@georgeezzell4474 6 ай бұрын

I want to see you do the tins.

@SladesVWBeetle 6 ай бұрын

Thank you, George, I’m going to do sanding, painting, technically the way I do it. And of course a complete cooling tin installation.

@vintage76vipergreenBeetle 6 ай бұрын

Take care of your health. Don't worry about a deadline.

@SladesVWBeetle 6 ай бұрын

Thank you my friend, I really appreciate that. They slammed me on prednisone really fast because I must’ve waited too long. Starting to feel much better now. I hope you’ve had an amazing day.

@vintage76vipergreenBeetle 6 ай бұрын

@@SladesVWBeetle When you're sanding and painting, you should have the garage door open. Even better is doing it, outside when the weather is warmer. I know you want to have a deadline, and make videos, but your health and safety should be first. Just my opinion.

@SladesVWBeetle 6 ай бұрын

@@vintage76vipergreenBeetle thank you my friend, and most of all thank you for caring. That’s the only thing about Pennsylvania, we are so limited on summertime. Sure wish I could move south, if I was a little younger. I hope you have a very beautiful and merry Christmas and your new year starts out wonderfully.

@vintage76vipergreenBeetle 6 ай бұрын

@@SladesVWBeetle Summertime here in Massachusetts/New England is limited also. Merry Christmas and a Happy New year to you, and your family.

@OwhyeeVdub 6 ай бұрын

Yup!

@SladesVWBeetle 6 ай бұрын

Sounds good thank you!!

@superbear617 6 ай бұрын

You may want to buy a "spray grip" tool. It fits over the spray can nozzle and allows you to activate the sprayer with a hand grip trigger rather than one finger. Good for larger jobs.

@SladesVWBeetle 6 ай бұрын

Hey, how have you been? I haven’t seen your name pop up in a while that made me smile. Believe it or not, I actually have two of those spray grips. But did I think to use them? Of course not lol 😆 yeah you’re right it’s easier on the wrist and fingers too. I hope you’re doing well.

@superbear617 6 ай бұрын

Thank you Slade! Doing well, still a loyal watcher! I'm glad you are on to tbe spray grips. I thought you did not need one for this job, but probably for larger jobs. Take care!!@@SladesVWBeetle

@Slatersave 6 ай бұрын

Yes, tin paint and assembly please?

@SladesVWBeetle 6 ай бұрын

Absolutely consider it done. Thank you so much.

@mikeg8828 6 ай бұрын

Looks good, Kinda too late now but why not just skip the rail all together and do Mexican seal that goes on the hood.

@SladesVWBeetle 6 ай бұрын

Thank you, Mike! I did give it consideration, honestly. But I already had these rails. And I figured I might as well do the stock version to show everyone what I do. Thank you for being here.

@kevinhamling1963 6 ай бұрын

G'day Mr Slade, An informative video it brought back memories of doing my 63. Luckily, I have a spot welder. Q. Your ultrasonic cleaner what product are you using. Have you experimented with anything. So thanks for sharing ✌️ Peace from Melbourne Australia.

@SladesVWBeetle 6 ай бұрын

Hey my friend! Thank you. I’m glad you enjoyed the video. The ultrasonic cleaner I have is a 30 L, made by Vevor. I have quite a few videos up if you scroll through the older videos. I believe I actually have it on the playlist under ultrasonic cleaner. I’ve tried to quite a few different products so far.

@kevinhamling1963 6 ай бұрын

@SladesVWBeetle Sounds like you have the same ultrasonic cleaner as I do. Thanks for the info. I'll check out your videos. ✌️ Peace

@SladesVWBeetle 6 ай бұрын

@@kevinhamling1963 peace, brother! I hope you’re doing well, my friend.

@jennslifeinhuntingtonwv2678 6 ай бұрын

😊

@SladesVWBeetle 6 ай бұрын

I hope you have a very merry Christmas my friend.

@jennslifeinhuntingtonwv2678 6 ай бұрын

@@SladesVWBeetle You too!

@jackofalltradesgarage 6 ай бұрын

Yes, tins please…

@SladesVWBeetle 6 ай бұрын

Thank you, my dear friend! I’m definitely going to do a complete tin restoration, and complete Cooling tin installation. I hope you have a very merry Christmas my friend.

@jackofalltradesgarage 6 ай бұрын

Merry Christmas right back at you and Heather.

@johnfreeman1189 6 ай бұрын

Outstanding!! (o\!/o)

@SladesVWBeetle 6 ай бұрын

OMG, how have you been, my friend! I have not seen your name pop up lately. Thank you so much for being here. And I hope you have a very merry Christmas. Our Christmas cottage video will be up next Friday. Same as last year!! It’ll be my only break I take for the year from filming.