VW Golf MK1 restoration ep.17 - 1.6D ENGINE REBUILD pt.1

Рет қаралды 42,223

2 жыл бұрын

On today’s episode I disassemble the Mk1 1.6 NA diesel engine. Every single part of the engine will be restored or worked on. My surprise was that all 4 pistons are melted from the injectors side, so the engine block will be rebored and it will get new pistons.
Stay tuned,
Drive SAFE!
Music by: White Bat Audio
/ whitebataudio

Пікірлер: 45

@90chiellini 2 жыл бұрын

Finally a restoration videos when someone is not working inside a 300.000 eur garage but in almost same conditions as most of us. This will be really helpful. Keep it up!!

@dmclegg66 4 ай бұрын

I just put one of these engines in my skid steer still working on it but it runs great thanks for your video mine was missing parts and now I know what i need.

@hairydeck 2 жыл бұрын

I just pulled my motor from my 1.6d Jetta to do a rebuild. Glad I just came across this series hope to see it continue

@upcyclethepastutp9901 2 жыл бұрын

Good luck my friend with the rebuild !

@hairydeck 2 жыл бұрын

@@upcyclethepastutp9901 thank you, do you remember what size bolts your used to put the motor on the stand?

@ravenlockner1442 Жыл бұрын

Sick bro, I'm getting ready to just pull my head first and see where that goes, let me know if you document it at all!

@milanantonoski673 Жыл бұрын

Great 👍 video!

@JunkVWs 2 жыл бұрын

Wild about that engine documentation 😁 such a hastle for a simple engine swap

@torbenspohr509 2 жыл бұрын

Please hurry.. 😂 love your videos

@jdmking4776 Жыл бұрын

Don't own a VW yet but. Looking like it might be my next car so. Good video

@efstratios.grammenis 2 жыл бұрын

Amazing video; I am looking forward for your next one. Keep up your great work and spirit and give Sophie a cuddle.

@upcyclethepastutp9901 2 жыл бұрын

Thank you mate ! Sophie is doing just fine, living the good life xD !

@zakariazak4133 Жыл бұрын

Un travail méticuleux BRAVO

@williammawoko6022 2 жыл бұрын

thank God came across this. Also rebuilding my 1.6D JK engine for 1984 mk1. My cylinders have small ridges at the top. Do yu thing i shuld resleeve

@upcyclethepastutp9901 2 жыл бұрын

Hey :) well don't really know what to tell you. I knew that i will have to re sleeve because i had to change the pistons. The guys at the workshop told me that I have a ware of 0.35 in the cylinders and said that i need +0.50 mm new pistons. I found new oldstock Nüral pistons from a local vw guy that were + 1.00 mm and 150 $ for all 4. The workshop gave me an offer of 100$/ piston (the 0.50 ones)... basically what i'm trying to say is that you should go to a good workshop and ask them what's the condition of the engine block and after that check for the best price solution that fits your budget and needs :)

@vwfatmobile3275 Жыл бұрын

I think getting oversized pistons and reboring it would be a better option than resleeving it. As long as it isn't bored to the max already.

@ramezgoldman6590 2 жыл бұрын

good job bro 👏

@chumadeanjafta6306 2 жыл бұрын

Great video man, I've been following the project. Looking forward to the next video.

@user-hm4qs2oe7n 2 жыл бұрын

приятно смотреть у самого мк1 и мк2 удачи!!!

@upcyclethepastutp9901 2 жыл бұрын

Thank you mate !

@BeloshapkaAutoBuilds 2 жыл бұрын

Very cool! I wish I would have done this with mine I had a 1.5d

@tj93cjc 2 жыл бұрын

Great progress man! Seems like the grunt of the hard work is ahead of you , good luck restoring that engine. I'm glad that you are consulting with professional shops as well. I think this car will be awesome when its done :) . Great content. I'm not a car guy but I'm learning a bunch . Keep'em comin'

@prepaonline7 2 жыл бұрын

Keep going bro

@lamarrox5929 2 жыл бұрын

I know the frustration of bolts breakingI had four sump bolts brake when i removed my oil pan because the drain vale bolt was stripped and the previous owner sealed the threads with silcone seam sealer to stop the leaking. We also have the same rules regarding engines and the paper work. I am eagerly waiting to see the reassemble of this beauty. Oh yes I love the Mark 2 GTI i saw it in your first video and i saw it in this one.

@rat_god69 Жыл бұрын

I have the same engine stand lol

@ziyadsalek6413 2 жыл бұрын

Excellent job 👍

@throttlefamily4655 Жыл бұрын

Great job on the video I just bought a vw bus with the same motor and im looking to rebuild it as well thank you so much you got a sub from me for sure

@calebshunmugam8920 2 жыл бұрын

Been waiting for a video like this 😁👌. Thank you for the content bro. Really entertaining 💯

@upcyclethepastutp9901 2 жыл бұрын

Thank you my friend !

@maverick4177 2 жыл бұрын

Cool, should last many thousands more miles after 👍🏻

@uniqule 2 жыл бұрын

Grate job mate, good luck with the project, I just can't wait to see it on the road. ❤️ GG WP

@Noname-ce8vp 6 ай бұрын

Hello, how did you remove the crankshaft pulley? 11:49

@jessgone Жыл бұрын

Salut, ti-ai dat si tu de lucru! As avea nevoie de cateva informatii, am acelasi motor, montat pe un T2 din '76, si daca ai putea sa ma sfatuiesti cu cateva chestii tehnice ti-as fi recunoascator. Cum pot lua legatura cu tine? Multumesc!

@Blacknight-vu1po Ай бұрын

What socket did you use to losen the cylinder head bolts

@khester7397 Жыл бұрын

Very cool. Thank you.

@arifteta3645 Жыл бұрын

Brother, please, do you have a video of how you put the engine in phase

@MoherPower92 Жыл бұрын

In Poland we had similar law about engine codes in documents I think until approx half of 2000s. But today even if u still have engine code in your paperwork no one cares, that doesnt matter even on technical inspections - you can change engine if you want, no one is reading and inspecting it anymore. Before that Ive heard that changing an engine was really painful experience (especially in communist times) - you even need to have documents where you have bought "new" used engine... Good luck with build!

@upcyclethepastutp9901 Жыл бұрын

Romania is a special kind of stupid in the EU block xD

@fanespoitoru9790 Жыл бұрын

De unde ești, omule bun?

@luismontero2866 Жыл бұрын

hello. Do you have a workshop manual for this engine? Can you provide me with that information? or where can i get it

@benjaminoh20 Жыл бұрын

Great video indeed...please help me on MK2 project if you do not mind please. I am a VW enthusiast from #Kenya #Thanks

@abderrahimmark Жыл бұрын

Without music would be nice. Keep ot natural.

@alexs8495 2 жыл бұрын

Totally sad for what you have done to the nature. Ecological disaster!

@upcyclethepastutp9901 2 жыл бұрын

Hey man :), I have no other option for washing big parts like this. Only in front of the barn. Still better than letting the dirt and chemicals into the public sewage. I did this couple of times and my grass grew back after two weeks :). Thank you for the input !