Thanks! Watched multiple vids for the part around 15min!
@AussieJarred7 күн бұрын
Thanks glad it helped
@opanakeopanake13382 жыл бұрын
Brilliant, you helped out today when I changed mine. Best instructional video, you're a natural born teacher, well done. RE the vacuum I have a mityvac where would I plug it in?
@AussieJarred2 жыл бұрын
Hi mate not a worry! Thanks for the kind words! Glad it helped! If you’re referring to the coolant vacuum, you buy the tool from ebay, it’s a specific tool that’s hooked up to an air compressor. I didn’t buy one in the end and it was okay, but lots of squeezing of the coolant lines and not sure if there was a bubble. But it was fine and has been ever since.
@ventsislavpendjurov55637 ай бұрын
Thank you very much for this DIY , especially for the torques . This is essential. !!!
@AussieJarred7 ай бұрын
Great stuff thanks for the kind comment !
@neveshappy6790 Жыл бұрын
South Africa 🌍 . tanx helped me alot. Removed battery for better access, The pipe clamps were a bit difficult but job done 189 000km.
@AussieJarred Жыл бұрын
Great news glad it helped
@reimundlorenz77933 жыл бұрын
Top Video, i have changed it these Weekend.the Video was a good Help. Viele Grüsse from Germany
@AussieJarred3 жыл бұрын
Hi reimund, Thankyou for the kind worlds glad it helped!
@philip.aocallaghan46023 жыл бұрын
Hi from Ireland...great video and explanation..keep them comming
@AussieJarred3 жыл бұрын
Hi mate thanks kindly I hope the video helps 🙏🏻
@CKarhu853 жыл бұрын
Thanks for a great DIY explanation! 👍🏻
@AussieJarred3 жыл бұрын
Thanks for the kind words hope it helped
@cyclonicleo5 ай бұрын
Jeez, what a faff around just to change the pump. I'm nowhere near skilled to do this myself, so off to my mechanic I go.
@AussieJarred7 күн бұрын
Anything is possible
@Rabeea0910 ай бұрын
Cool guy , well done 👍🏻
@gazeema5 ай бұрын
Great video mate! I know it’s been a while but where did you get the pump from??
@AussieJarred5 ай бұрын
Thanks mate, I got it from run auto parts from memory. been a while as you say 🤙🏻
@bassnaticsteam6238 Жыл бұрын
Thanks alot for this video.... Helped
@AussieJarred Жыл бұрын
Great glad to hear! All the best
@michaelhou879210 ай бұрын
Absolute legend 🤝
@AussieJarred10 ай бұрын
Thanks mate hope it helped 🤙🏻
@bebo1042 жыл бұрын
Thanks. Great help to replace mine. Perfect.
@AussieJarred2 жыл бұрын
Thanks mate! Glad it helped
@xtremeprojects_68502 жыл бұрын
Good job! Thank you 👏🏻. Only a question, is the pump synchronised with the camshaft? I don’t under everything you say about the cylinder no.1. Thank you!
@AussieJarred2 жыл бұрын
Hi Thankyou! No it doesn’t matter, the procedure says it does but it doesn’t.
@sopcntuli59852 жыл бұрын
Great video, just used to replace pump. Could you send something on replacing the Polo 6 1.2 Tsi intercooler
@AussieJarred2 жыл бұрын
Hi mate I reckon it would be easy enough to do yourself, you would just have to take the bumper off, I think there would be a fair few videos on this! Good luck
@mrsdoubtfire53410 ай бұрын
My car only has 70 000km on it. And the pump is leaking. Last month it was the fuel sensor in the tank! What happened to German "quality"!?
@thabomkhwebane19342 жыл бұрын
Awesome video, the last part though haha "I believe in ya". One question man, after applying torque to the water pump, how tight should the belt be? Should it still move a bit or it should be super tight with no slack and movements on the gear? Thank you
@AussieJarred2 жыл бұрын
Haha thanks mate. I think I spoke about it, it’s hard if you don’t have experience but have you ever tightened a motorcycle chain? Kinda like that. Not heaps tight but definitely no slack if you feel?
@thabomkhwebane19342 жыл бұрын
@@AussieJarred thank you Jarred. Do not have much experience with motorcycles but saw a vid on how the tension on the chain is adjusted and measured, I do have a rough idea now. Appreciate the work you did mate.
@pimpalation53922 жыл бұрын
Por que te abra fallado por usar otro anticongelante que no fuera g13 o por uso
@adavey3150 Жыл бұрын
Awesome video - thanks heaps
@AussieJarred Жыл бұрын
Glad you enjoyed it!
@abuasfur73342 жыл бұрын
Hello I have a 2013 1.4 tsi. No overheating or leaks but car runs just a little cold - a tad under 90c This is indicative of a bad thermostat right? How do I change the thermostat only? Cannot find any useful vids for my car.
@AussieJarred2 жыл бұрын
Hi I would say correct
@abuasfur73342 жыл бұрын
@@AussieJarred Okay thanks - any idea who to replace it? I can't find any guides online
@piccions93912 жыл бұрын
Hi man, great video! Can you tell me how many coolant liters you buyed?
@AussieJarred2 жыл бұрын
Hi I’m sorry I’ve forgotten please Google, it may be 4 or 5 litres from memory
@sidhuzharry2 жыл бұрын
Hi mate, thanks for video, just after replacing pump, when i turned on my ignition it said SERVO BRAKE FAILURE. is it because of removing that hose or i did something bad ? I never had that error before
@peterdixon20352 жыл бұрын
Check the plug on the vacuum hose running parallel with the top inter ooler pipe or maybe the vacuum hose broke? It is for the brake booster
@esierisa10 ай бұрын
How many tension you put in the belt?
@AussieJarred10 ай бұрын
Just a good amount, nothing crazy
@esierisa9 ай бұрын
@@AussieJarred thank you
@user-tk7ho2lx9n5 ай бұрын
Hay 04e121600bl not AL is it gonna fit?
@AussieJarred5 ай бұрын
Unsure sorry it’s been a long time since making the video
@bokzader3 жыл бұрын
Hello, Do you have the part number ? Did you order the small belt apart or it comes with the waterpump? Thank you.
@AussieJarred3 жыл бұрын
hi water pump part number: Geba Water Pump 10635 pulley belt: 04E121605L
@AussieJarred3 жыл бұрын
04E121600A i believe was the actual pump number but you should see it in the video
If the belt tension not kept means what will be happen bro
@AussieJarred Жыл бұрын
Hey mate, your water pump won’t work if the belt slips :(
@Kal-pw9vl2 жыл бұрын
Hi mate, I've got the same ea211 engine in my leon. It's due a timing belt change, is it worth me changing the water pump at the same time as its driven by its own belt? Thank you
@AussieJarred2 жыл бұрын
Hi mate, totally up to you ! I would definitely if they are the same age……
@Kal-pw9vl2 жыл бұрын
@@AussieJarred If I choose not to change the pump as it has its own mini belt, and is on the opposite side of the engine from the cambelt. Would a failed pump throw the timing belt off?? A VW tech told me there's no need to chnage the water pump with the belt on these engines
@sadesony3 жыл бұрын
Hi. My car have like this engine Did this engine have pcv and where i can find It in what min and scond in this video. Thanks