Just bought a T4, so, have a sub and I'll be no doubt going through every 1 of your vidz. Happy days.😊
@RedHeadForester3 жыл бұрын
That trick using the allen key to remove the front panel is going to save me a lot of hassle in future. Thank you!
@danw137 Жыл бұрын
Hi Joel, thanks for taking the time to produce your T4 videos, they've become one of my 'go to' guides as I restore my 2001 VW T4 800 special. I took my front wings off last weekend cleaned out inside and installed the drainage kit I bought from eBay, your videos were incredibly helpful. Amazingly the wheel arches and inside the wings were almost rust free even though there was a load of damp T4 special Kompost in there! One thing worth mentioning, my front wings were bonded on (pretty sure this was factory panel sealer) as well as bolted and were a complete pain to get off. I had to cut the panel bond and then pour a couple of kettles worth of boiling water between the wing and inside panel to soften the panel sealer, then pull the wing off. It doesn't look like your wings had this sealer so maybe they'd been off before. Anyway, thought that might help someone else who has to do the same job. Thanks again.
@EntheogenMusic10 ай бұрын
From one 2001 800 special owner to another, thanks for the tip about the panel sealer! Was a great heads up. Boiling water was a nifty trick!
@danw13710 ай бұрын
@@EntheogenMusic no worries, glad my comment was helpful. Usually every job on my T4 takes roughly 3 times as long to complete as the KZfaq video shows and a good helping of swearing...so it's nice to help someone else out in the same situation!
@JoelsStuff4 ай бұрын
Everything on my old banger has been off before. I am the 15th owner! Thanks for the info about sealer 😊
@samwalker97624 жыл бұрын
Perfect timing for the video! Working on my ‘96 T4 today and this was a big help, thanks! 👍
@JoelsStuff4 жыл бұрын
Good luck!
@malvaughan4 жыл бұрын
Really helpful, thanks mate 👍🏻
@deano2160 Жыл бұрын
Had this on the save list for a few years now and just got round to doing it. Thanks you for the video mate, it helped very much. Good to see whats what before doing a task than going blind. 👍
@stevep97394 ай бұрын
Need to change my front cross member this is very helpful, 👍
@johno78084 жыл бұрын
Great video & very helpful thanks! 👍
@howieouterbridge1986 Жыл бұрын
Awesome! Thanks for this. I have to remove my wings to access the VW compost. Wish me luck!
@stephenwalker36793 жыл бұрын
Made me begin ! Well done 👍
@polderfischer85652 жыл бұрын
That is a very useful Film! Thank you!!
@WildPhotoShooter3 жыл бұрын
Brilliant , I learned something else.
@haskyb91844 жыл бұрын
Nice little video. I’m hoping to find some videos on rear arch replacements as I’m hoping to tackle that on my T4 at some point 👍🏻
@JoelsStuff4 жыл бұрын
Thankfully my rear arches seem to be ok. Good luck!
@alexholver25072 жыл бұрын
G'day thanks for the vid. I just did my 99 and that bloody metal tab on the grille was screwed in possibly from a prior accident fix. For this situation take the bumper off first then rhs headlight top bolts, then rhs fender as per vid to get to the screw, then grill comes out etc. I'd collected enough compost for a plant pot! If you park under any sort of conifer you need to clean them out every couple of years.
@adetremontionwhite4 жыл бұрын
Thank you for vid, i was a little unsure if to taxkle this job but younhave made it look easish so im gunna attempt it my self cheers buddy👍👍
@JoelsStuff4 жыл бұрын
It’s as easy as it looks. Good luck!
@poberauer3 жыл бұрын
Thanks, helped me get mine off today. Btw seems simpler to just get the headlights right off and out the way too.
@BAK873 жыл бұрын
Brilliant. Thanks mate.
@buriedintheshed3 жыл бұрын
Great video!
@meatmanifesto4 жыл бұрын
Good video you've saved my wings from rusting our, I had a look behind my wings they were pretty full with dead leafes and stuff.
@JoelsStuff4 жыл бұрын
Yup that happens on these vans!
@freakunit7 ай бұрын
Is there a way of sucking up.the leaves without removing wings etc ?
@leswatson91113 жыл бұрын
Hi Joel, roll on good weather A. Les
@Mads25953 жыл бұрын
Great video👍
@gilly41334 жыл бұрын
Nice, Good to know its just bolted on. Mines has a dent a some rot so I feel if I see a good 2nd hand one its not too bad to swap. Keep em coming Joel :)
@JoelsStuff4 жыл бұрын
Not a bad idea at all. Sadly I looked on ebay and there were none any better than mine
@patrickford53583 жыл бұрын
I love the KISS principle you apply here. Shows you know what you're doing. Excellent video. I have a loose front panel on my 2001 T4 transporter and I 've been told I need some little plastic lugs that fit onto the end pieces of the panel. Do you know what they are called?
@JoelsStuff3 жыл бұрын
Hey, thanks! I’ve no idea what they are called I’m afraid 🙁
@notsosmartmart54023 жыл бұрын
Thank you
@Pepito4994 ай бұрын
To replace the antenna, is it necessary to do this?
@campbellcampbell41572 жыл бұрын
The plastic bracket with the plastic clips are to be loved, just push the centre right through and the plastic bracket unclips with an easy pull. If you lose the centres a plastic golf tee does the job when replacing.
@plechovkat11 ай бұрын
now i know why they called it in my country a nest for hamster :D
@stephenfoxall96553 жыл бұрын
Thank you for the excellent video. On another video that I now can't find I know you fitted drain pipes from the holes just below the window screen. Where can I buy them with the little metal bits for the holes please?
@JoelsStuff3 жыл бұрын
Hi there. If you just search ebay for “t4 komposter set” you should find the same kit for about £28 that I used (highly recommended). Good luck!
@stephenfoxall96553 жыл бұрын
Joel's Stuff yes found these on eBay @££31. Extortionate and as they come from Austria with £8+ fright and probably Brexit import problems I am going to try another route
@stephenfoxall96553 жыл бұрын
Will try dinghy transom drains to go through metal then just buy plastic tube locally and rest from stock.
@EntheogenMusic3 жыл бұрын
Great video mate. Do you know if this is the same process for the later T4 models?
@JoelsStuff3 жыл бұрын
Great question, and I’m not 100% sure I’m afraid
@EntheogenMusic3 жыл бұрын
Joel's Stuff No problem mate, thanks for replying. Love your channel by the way. Just bought a T4, will be using your videos for a lot of DIY! Keep em coming 😁
@mcjjordan2 жыл бұрын
Were you wings not sealed on?
@R0ger0072 жыл бұрын
Is there any sealant between the removed wing and inner wheel arch that needs reapplying when refitting the wing?
@JoelsStuff2 жыл бұрын
I don’t think so. There is a gap but I think it’s ok to just leave that for drainage
@jeromeportable11413 жыл бұрын
Do you know how i can remove for thé first t4? I have not got screw....
@carl_hall3 жыл бұрын
The wings on early T4's (before1996 I believe) are welded on instead of bolted, unfortunately.
@charliesnell1426 Жыл бұрын
I have a question. Doesn’t the pipes just get blocked with all the crap???
@JoelsStuff Жыл бұрын
Hey! Thanks for the question. Surprisingly my pipes have not become blocked. However, the debris still builds up behind the fender, so I’m not sure how effective the kit is overall
@leswatson91113 жыл бұрын
Hi JOEL just saw your video did that water drainage kit you used work, as I am going to order one. cheers. Les
@JoelsStuff3 жыл бұрын
Hi Les. It’s funny you should ask because just yesterday I removed the wing to have a look at it. Sadly it looks like the leaves are still finding their way behind the wing - they must get down the gap near the door. The drainage kit still works perfectly well to drain water, but if you buy one similar to mine it will not stop the leaf build up 🙁
@leswatson91113 жыл бұрын
@@JoelsStuff thank's Joel, I will do the water drain, not to bothered about build up of debris, just want to stop water getting in cant findwhere,no sign anywhere just wet on wheelarches, new screen going in Tues 2/2 /20 . Les
@JoelsStuff3 жыл бұрын
Do you have water leaking into the interior of the van? If so it could be the windscreen - i’ve been dealing with this issue myself and have managed to stop the leak with a bit of tiger seal in a few places
@leswatson91113 жыл бұрын
@@JoelsStuff Hi Joel, yes driving me mad, had all rubber mat up, no sign of any leak's, all clean paintwork, the wheel arches always seem wet after rain, so having new screen put in Tues 2/2 have also purchased one of them kits. It'll probably stop raining when new screen goes in. Les
@JoelsStuff3 жыл бұрын
A new screen will hopefully sort it! Best of luck.
@kaskader51782 жыл бұрын
Ok. But i'm my car the fender is stuck so mach that i can't remove them
@citroeno Жыл бұрын
you dont need to all that to remove fing just pull down sides of bumer to get to bolts
@tamariderr3 жыл бұрын
At the end when the panel is off and you're scraping out the leaves.. where is the water supposed to drain out?
@JoelsStuff3 жыл бұрын
Hi jack, I have a video on my channel posted shortly after this one where I go into this in detail
@tamariderr3 жыл бұрын
@@JoelsStuff that's great thanks. On your break video you comment that you can't get the disks off or you would have replaced them too.. did you ever manage to get them off? Was it the single bolt that was stuck?
@poejalmer81084 жыл бұрын
I'm not sure but the plastic fixings you pulled out look a bit like the T4/caravelle interior moulding screw clips (look them up on eBay). If they are, the small hole in the middle is for an allen key, which draws out a threaded plastic bolt that has widened two tabs out to secure it. I might be wrong but will be doing this before lockdown ends, so will see. Thanks for a great video!
@JoelsStuff4 жыл бұрын
That sounds like the ones!
@poejalmer81083 жыл бұрын
I've now just done mine. Mine had metal studs which had badly rusted heads. I managed to lever them out with a flat head, enough to grab with pliers and then pulled hard to remove them. I replaced them with the plastic trim clips you seemed to have on yours, which works well.
@craigthomas79213 жыл бұрын
@@poejalmer8108 i have one video on my channel which shows an easy way to get these plastic clips off with no damage (they're the same ones used inside and out)
@poejalmer81083 жыл бұрын
@@craigthomas7921 Nice, I'll be carpeting the ceiling one day, so that will come in handy!
@dampcurtain3 жыл бұрын
So I have none of the bolts shown in your video. I'm guessing that I cant take my wing off. 😫
@JoelsStuff3 жыл бұрын
None of them? It is a T4??
@dampcurtain3 жыл бұрын
@@JoelsStuff yeah mine are factory welded. I've got a 94 vw t4 transporter.
@davidfirth65354 жыл бұрын
Any wonder they rot, shite design, regards, David.