Vz-Printhead - timelapse
Рет қаралды 2,568
![Klaus-Michael [KMS]](http://yt3.ggpht.com/ytc/AIdro_mkUjDoeaHdWU0tyH0kzO7fdOj0faGkvQMcpsiucZWYFA=s48-c-k-c0x00ffffff-no-rj)
Жыл бұрынRunning at 1600% Speed
Used tools:
50mm Face Mill: DOC:0,5mm/0,1mm WOC:40mm RPM:6000 Feed:1500mm/min
2mm VHM two flute: DOC:1mm WOC:2mm RPM:24000 Feed:700mm/min
3mm Chamfer Endmill: Chamfer width: 0,1mm RPM:24000 Feed:1000mm/min
6mm VHM two flute: DOC:2mm WOC:1mm RPM:20000 Feed:2400mm/min
2.5mm Drill: RPM: 24000 Plunge Feedrate: 800mm/min
M3 Thread Mill: DRPM:18000 Feed:100mm/min
Daten zur Fräse:
20er CPC Schienen mit hoher Vorspannung, 100x70x40cm
Dakai Dual Nut Kugelumlaufspindeln Y 2005, X & Z 1605
90x90 Alu Profile Schwer für den Tisch
160x80 Alu Profile Schwer fürs Portal
Portalwangen aus S235JR Stahl
Kreuzplatte und Z-Achse aus 5083 Alu
RATTM 4.5KW ATC BT30 Spindel + 5.5KW Fuling VFD
PlanetCNC TNGv2
Daten zur Drehe:
Paulimot SIEG SC4
Z-Achse: 2005 KUS + JMC CL 3NM
X-Achse: 1204er KUS + JMC CL 3NM
Steuerung: PlanetCNC TNGv2
@Vez3D Жыл бұрын
Soooo awesom❤
@KlausMichaelKMS Жыл бұрын
Thank you
@xyzspec82 Жыл бұрын
Amazing parts. Weel done 👌🏻
@DizzyWood_shop Жыл бұрын
Cool. Actualy I just made these parts last week for a client a couple of sets. Nice to see ur spin on it. Great work!!
@KlausMichaelKMS Жыл бұрын
Nice. I always like to see how other people are approaching those things. Unfortunately only very few people are sharing this kind of stuff.
@user-jm2yg5ky8w Жыл бұрын
Moin, danke fürs Teilen. Hast du das CAD Modell aus den Druck SLTs übertragen? Danke für die Antwort
@KlausMichaelKMS Жыл бұрын
Habe das basierend auf dem Druck Modell und dem verfügbaren Material zum cnc Modell nach gezeichnet
@user-jm2yg5ky8w Жыл бұрын
Hammer! Super Job
@timogross8191 Жыл бұрын
Why do we need to use the tape? (did not work out, tape was getting washed away by the coolant ) Gluing parts direktly was better, but have to be very careful. 1:39 is the baby z-height because of the tape? I would have thought you can go much deeper and do not need to cut several times. 🙂
@KlausMichaelKMS Жыл бұрын
I use the tape because it's easy to remove afterwards. No need to clean anything up. Yes the baby steps are due to the tape. The machine could push much more but then the parts start flying 😉
@carbonkid888 Жыл бұрын
Könntest du noch paar Fräsparameter verraten ;-)
@KlausMichaelKMS Жыл бұрын
Habe sie mal mit in die Beschreibung gepackt.
@carbonkid888 Жыл бұрын
@@KlausMichaelKMS Dank dir! Muss mal bissl vergleichen ;-) Bin mit meiner letztens nicht so zufrieden gewesen...
@Championheli Жыл бұрын
Mit BlueTape und Sekundenkleber "gespannt"?
@KlausMichaelKMS Жыл бұрын
Ja
@MBCNC Жыл бұрын
You glue the alu to the blue tape?
@KlausMichaelKMS Жыл бұрын
No. You put Bluetape on both surfaces und glue the blue tape together
@MBCNC Жыл бұрын
@@KlausMichaelKMS thanks, awesome job
@christianroser6500 Жыл бұрын
Würdest du welche gegen Aufwand Entschädigung herstellen?
@KlausMichaelKMS Жыл бұрын
Macht mehr Sinn wenn du die direkt bei f3d racing bestellst.
KiKiDo
Рет қаралды 4,1 МЛН
TITANS of CNC MACHINING
Рет қаралды 156 М.
TMDesign
Рет қаралды 765
Haas Automation, Inc.
Рет қаралды 558 М.
GLAZOV
Рет қаралды 57 М.
ГЛАЗУРЬ СТЕКЛО для iPhone и аксессуары OTU
Рет қаралды 6 МЛН