W126 Mercedes-Benz S-Class Coolant Flush.

Рет қаралды 2,941

Жыл бұрын

How to do a complete coolant flush without removal of engine block drain plugs.
on a W126 (S Class) Mercedes-Benz. Remove all old coolant/antifreeze and replacing it with phosphate free formula.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Dain Plug part number 000-501-01-71 (Optional)
Coolant/Antifreeze Zerex G05
Distilled Water
Radiator Flush Cleaner (Optional)
----------------------------------------------------------------------------------------------------------------------------------------------------------
View my Channel / @ka-benz
-----------------------------------------------------------------------------------------------------------------------------------------------------------
#w126 #v126 #mercedes_benz

Пікірлер: 13

@ahmadalenezi2498 7 ай бұрын

Good job

@grantbellinger7403 7 ай бұрын

Matey so glad I found you!

@ka-benz 7 ай бұрын

Thank You.

@westhavenor9513 Жыл бұрын

Great job! I done this before, the same way, and it does take a long time to get all the coolant flushed out. Surprised you stuck with it so long, but that's what it takes. Beautiful W126, btw!

@ka-benz Жыл бұрын

Thank You.

@richardtaylor5948 Жыл бұрын

Great upload

@ka-benz Жыл бұрын

Thanks.

@Aaronhouston33 11 ай бұрын

I’m At 11 drains and it’s still colorful

@ka-benz 11 ай бұрын

Make sure your heater and fan are on all the way. It should turn clear at some point.

@charlestimmis273 7 ай бұрын

@@ka-benz Yap. Did that last year tool about 25 Gallons to get it cleared. Filled rad, took car for a ride, turn heat to full and drain. wait for it to get cold and repeat... Beats opening those engine bolts.. Thanks for the great tip

@SuperStrle Жыл бұрын

How you know if all water is out before you add Zerex ? Can you add Prediluted instead.

@ka-benz Жыл бұрын

There is still a lot of water in the system and if you use a 50/50 mix you will have to check the temperature range with a anti-freeze gauge for your local protection. I need -35+ so I used concentrated.

@SuperStrle Жыл бұрын

@@ka-benz perfect tank you much appreciated. Seems like that will not be option since in my area gets up to -63 F, I guess best bet will be full flush, or mix with current coleant.