No video

W163 (1998-2005) Mercedes ML Blend Door Actuator Replacement!

  Рет қаралды 117,417

Helping Hand Auto Repair

Helping Hand Auto Repair

Күн бұрын

GT shine products: gtshine.com/pr...
Coupon Code: HELPINGHAND
-- Check out my NEW channel: / @knownworldwide
--------------- Hey guys! Here today showing you my method of replacing the infamous blend door on the W163 Mercedes ML SUV. This would apply to any 1998-2005 Mercedes ML SUV. These actuators go bad very frequently and can be a nightmare to replace with having to remove the dash. I show you how to replace the part without having to remove the dash! Good luck and have a good day!
If you found this video useful and would like to see more car repair content, please don't forget to hit that subscribe button! Also if this video was helpful to you show you like it by hitting the like button! If you guys would like to see any specific vehicle repair item please feel free to send me a message or simply ask in any comment section on my videos! I am here to help everyone fix their cars so that you guys can save money by NOT going to the mechanic shop.

Пікірлер: 82
@leighdavis5598
@leighdavis5598 5 жыл бұрын
I never really comment on video's but this one is good,not to long and dude is very plain and easy to understand,great job
@HelpingHandAutoRepair
@HelpingHandAutoRepair 5 жыл бұрын
Leigh Davis Thanks! I’m glad you shared that! That is exactly what I’m aiming for. Too many videos are not straight to the point. I don’t like wasting time lol.
@peterroy6801
@peterroy6801 Жыл бұрын
I used to just take the glove box out. At beginning of Summer, and again at beginning of Winter. And stuff a wedge of folded up photocopy paper. To wedge the actuator in the cold position, or alternatively in the heat position. Depending on the season. Simple, takes about 15 minutes. And avoids all of this drama.
@MountainParameters
@MountainParameters 11 ай бұрын
I did that at the beginning of the summer and it worked fine. However, now the actuator seems to be seized and I cannot move the white arms, so looks like this will not work for everyone.
@104609
@104609 5 жыл бұрын
Thanks for posting this video. I followed your advice and now the heat works. Please keep uploading videos of the ML class W163. Thanks
@HelpingHandAutoRepair
@HelpingHandAutoRepair 5 жыл бұрын
Kilvet Thanks for that! Cheers.
@gfinklea
@gfinklea 4 жыл бұрын
Job is done. Thanks for your video. My car is a 1998 so their are some differences but very minor. I slotted the bolt holes for the air bag cover and ran the nuts down as far as I could so I could slide the studs back onto the bracket. I then tightened the nuts. I will glue it down at a later time. I want to make sure it is going to stay working for a while. I am a happy camper.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
Nicely done!
@gobb4o
@gobb4o 5 жыл бұрын
Perfect video! Straight to the point! Great job!
@HelpingHandAutoRepair
@HelpingHandAutoRepair 5 жыл бұрын
gobb4o thanks! Glad you found it helpful.
@alexalexandrakis8205
@alexalexandrakis8205 3 жыл бұрын
This is one of theist video I have seen, good presentation, thank you.
@elmono3939
@elmono3939 3 жыл бұрын
Well explained ! Working on it tomorrow. Thank you for sharing your knowledge with us !
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
No problem
@cyronader
@cyronader 5 жыл бұрын
Thanks!. Airbag part is a pain in the ass. I used a rubber hammer to get the airbag more flush with the dash and used a strip of velcro to hold it down. looks good.
@vicsogreen
@vicsogreen 4 жыл бұрын
Thanks buddy, made my day a whole lot easier
@careystewart1648
@careystewart1648 Жыл бұрын
Thanks for your video. I need to do that repair on my 2000 ML with 185,000 km or 114,885 miles.
@hayamicin
@hayamicin 3 жыл бұрын
Could you please share a flap actuator part number?
@claylynn6391
@claylynn6391 4 жыл бұрын
Thank you for doing a very good on this video and I appreciate very much what you did.
@aklilutesfamariam9414
@aklilutesfamariam9414 2 жыл бұрын
Good job thank you
@Leo70780
@Leo70780 3 ай бұрын
The w163 ml is my favourite Mercedes model 🇦🇺 🦘
@seshachary5580
@seshachary5580 Жыл бұрын
very educative. Thank you regards
@dtn9201
@dtn9201 5 жыл бұрын
I've been putting this off for a year or so. Really didn't want to rip apart the dash, but was going to when the weather got a bit warmer. So glad I came across this video! Very good instructions and simple. Do you think one could just put velcro around the whole air bag dash cover instead of having to bolt the back and velcro just the front? When testing out the motor before; It seemed to move whenever the dial would be set cold or hot, no clicking. Maybe another problem? Maybe the flaps? I left it on ac but needed heat this past winter. Always blew cold. Thanks again for the wonderful video!
@HelpingHandAutoRepair
@HelpingHandAutoRepair 5 жыл бұрын
Derrick Niide This actuator I am replacing here controls air temperature. So it will control cold or hot air. Even if it doesn’t click the gears could be stripped which would give you no audible clicking. I don’t see why you couldn’t use Velcro around the airbag flap. Good luck.
@cooper8318
@cooper8318 4 жыл бұрын
DONT use velcro around the whole airbag cover! If it ever blows that cover could kill someone! Its BOLTED on back for that very reason. Velcro toward the seat is fine, velcro by windshield is BAD!
@kirillalder2961
@kirillalder2961 4 жыл бұрын
Excellent vid, thanks. Need to do this soon on my 2000 ML320 as my air is stuck on cold and we have winter. I removed glove box and seen that there is no movement on blend door motor. One weird thing I noticed while playing with dials is that when I activate recirculated air, the flap on the ventilation enclosure is opening up and when I disable it it closes. Is this normal? Should not it be another way around?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
Kirill Alder It should be flipping up towards the windshield area when activating recirculation.
@kevinbowers3917
@kevinbowers3917 5 жыл бұрын
Great video. The lower 'stays' attached to the airbag cover are available, I believe, but must drill and rivet if I remember correctly, then snap cover in place, ed.
@jorgeluisparra8163
@jorgeluisparra8163 5 жыл бұрын
The best video on this subject. Years ago I tried to remove the air bag but couldn't get the right rear bolt off. Didn't know how to pull the lower portion of the dash off to get to that bolt so I gave up. However, I will get back to that task since you clearly showed us how to loosen that part. Thanks for your easy instructions.
@gfinklea
@gfinklea 4 жыл бұрын
How do you pull the airbag cover up? Does it take much force to break the 2 clips that hold it down?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
gfinklea Just use a razor blade in between the bottom of the cover and the top of the glove box area. Then the door will lift up easily aside from having to undo the three 10mm nuts on the underside of the cover
@gfinklea
@gfinklea 4 жыл бұрын
@@HelpingHandAutoRepair Thanks so much. I am going to take on this job as soon as my parts arrive. Very good video.
@norcomsac5766
@norcomsac5766 4 жыл бұрын
I don't have the key, it's lost. I can't open the door or start the car. If I make the door key, with that same key can I start the car if I already have the transponder programmed? Will we have to add a few more slots to the door key to start the car ?. Thank you.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
If you have a key made AND programmed, it will open the doors and start the car.
@luvpoems4u
@luvpoems4u Жыл бұрын
Excellent!!!
@fabianoliver3939
@fabianoliver3939 5 жыл бұрын
very good video, make me understand, maybe, why a ML that i saw yesterday has had a glued airback cober, with wite siliconw! thanks, and keep shooting
@bernardnguyen3167
@bernardnguyen3167 5 жыл бұрын
Great. Good video, good presentation.
@jessecoleman9475
@jessecoleman9475 3 жыл бұрын
Thankyou there buskis! Got my shit fixed! 🔧🔧🔧
@macedonioreyna1583
@macedonioreyna1583 4 жыл бұрын
Mines dosent make that noise but would fixing that make my ac work agian? Bought a new compressor and still no ac got a mercedes benz ml350 2003
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
I assume you had the system recharged after the new compressor was installed?
@adobejuan2160
@adobejuan2160 3 жыл бұрын
Good vid thx
@LOCKBROWN1
@LOCKBROWN1 4 жыл бұрын
Very good. Show
@kenpowell8600
@kenpowell8600 Жыл бұрын
How were you sure it wasn’t the switch?
@HelpingHandAutoRepair
@HelpingHandAutoRepair Жыл бұрын
Switches don’t make a clicking noise like the one shown in the video.
@mikimiki195
@mikimiki195 Жыл бұрын
Will this issue cause low heat almost no heat? Thanks
@HelpingHandAutoRepair
@HelpingHandAutoRepair Жыл бұрын
It’s possible if everything else is working.
@user-nw5pe4fv8r
@user-nw5pe4fv8r Жыл бұрын
What is the white plastic part called? It is being held at about 16 minutes into video. It is the part that you remove from the old actuator and put on the new actuator. If anyone can tell me please, that's the part I need to replace.
@brandonw33zfy1184
@brandonw33zfy1184 2 жыл бұрын
I have a 2002 ML320. Does the blend door going bad also cause air to sometimes come through the vents when the controls aren’t on?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 2 жыл бұрын
It doesn’t. That would be a mode door issue
@juandr242424
@juandr242424 5 жыл бұрын
Thank you!
@tpdtopcop2010
@tpdtopcop2010 Жыл бұрын
Quick ? What would problem be if the blower blows out vents and won't blow to floor or window when moving dial?
@HelpingHandAutoRepair
@HelpingHandAutoRepair Жыл бұрын
Your mode door actuator is bad.
@janisbrants2381
@janisbrants2381 4 жыл бұрын
Hi great video !s ml 270 2002 very same?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
This I assume is the CDi model? If so then yes this should be the exact same procedure.
@janisbrants2381
@janisbrants2381 4 жыл бұрын
Thanks very much 👍👍👍
@ayatesemitchell3224
@ayatesemitchell3224 3 жыл бұрын
My cla 250 heat isn't working not running hot had a mechanic look at it say its blend door actuator. But I have no ticking noise
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
You would have to inspect the blend door for proper operation while you change the temperature
@ayatesemitchell3224
@ayatesemitchell3224 3 жыл бұрын
@@HelpingHandAutoRepair how do I inspect it
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
Well the only blend door I can see on your system is behind the glove box. If that is the problem you would need to remove the box and inspect it. I am leaning more towards the heater control valve.
@justinbrowning2079
@justinbrowning2079 3 жыл бұрын
What are the symptoms that this needs replaced?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
Clicking noise when turning the knob between hot and cold. Or turning the temp knob and you don’t get heat or cold
@EH1904
@EH1904 2 жыл бұрын
Thanks for the video! Do you have the part number of the blend door actuator that you used? I will be doing the same to my 2000 ML320.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 2 жыл бұрын
I don’t sorry. This was awhile ago. It can be found online or at the parts store.
@norcomsac5766
@norcomsac5766 4 жыл бұрын
Hi, thanks for the video. In that same ML320, 1998. How can I remove the key drum from the door without having the key because it was lost. Also, you have to add some slots to the door key to start the car, or it is the same key with the same number of slots. Thank you.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
I’m sorry what are you trying to do? Open the door?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 4 жыл бұрын
I’m sorry what are you trying to do? Open the door?
@babydollvee
@babydollvee Жыл бұрын
What does it mean if it isn’t making the clicking noise? But it’s still stuck on heat. And i recharged the ac
@HelpingHandAutoRepair
@HelpingHandAutoRepair Жыл бұрын
It could very well just be completely dead.
@HelpingHandAutoRepair
@HelpingHandAutoRepair Жыл бұрын
The actuator that is.
@jpmartinez7853
@jpmartinez7853 2 жыл бұрын
What does the blend door actuator do?
@HelpingHandAutoRepair
@HelpingHandAutoRepair 2 жыл бұрын
Controls the temperature of the air from hot to cold
@Seriousdrew
@Seriousdrew 3 жыл бұрын
Why is velcro needed
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
If you take this shortcut like I am you need to be able to hold down the airbag cover.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
The proper way to do this repair would be to remove the entire dash. However I don’t want to do that.
@kenpowell8600
@kenpowell8600 Жыл бұрын
Mine doesn’t click so maybe it’s my switch?
@Lani-Grace
@Lani-Grace 3 жыл бұрын
I have a 2002 ml20 the mechanics telling me that there's some kind of compressor switch or something that needs to be replaced I'm not really sure but all he's trying to charge me $853 for this
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
Not sure what he is talking about. I assume your AC doesn’t work? It could be many things. This video just shows a bad actuator. If your car clicks like shown in the video when switching between cold and hot on the temperature dial, then you have a bad actuator as shown in the video. If your temperature changes without clicking then your actuator is fine.
@aaronbrooks7132
@aaronbrooks7132 Жыл бұрын
Mines stuck on warm I had changed the whole ac.... it was uneeded to find out this is the problem.. have yet to do the iob..
@petermac1760
@petermac1760 2 жыл бұрын
Word of advice.Take the top part of the dash off,not that difficult.Went to junkyard and pryed the air bag cover off just to see.You’ll never get it back on right.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 2 жыл бұрын
I specifically stated in the beginning of the video that this way isn’t the correct way.
@slpip4365
@slpip4365 3 жыл бұрын
MB is a piece of junk and trash. My ML and C300 are junks. It carries no resale value.
@HelpingHandAutoRepair
@HelpingHandAutoRepair 3 жыл бұрын
I could have told you that a long time ago. No modern European car will be worth anything.
Mercedes ML320 No Heat or Air Conditioner
21:27
OG's Garage
Рет қаралды 93 М.
2015-2020 Hyundai Elantra starter replacement
24:09
Helping Hand Auto Repair
Рет қаралды 10 М.
If Barbie came to life! 💝
00:37
Meow-some! Reacts
Рет қаралды 52 МЛН
Magic trick 🪄😁
00:13
Andrey Grechka
Рет қаралды 34 МЛН
OMG what happened??😳 filaretiki family✨ #social
01:00
Filaretiki
Рет қаралды 8 МЛН
Опыт владения Mercedes-Benz W 163
26:00
Wolf Auto
Рет қаралды 25 М.
1999 ML320 blend door actuator location
10:31
Jim Robinson
Рет қаралды 9 М.
Mercedes W163 2003 ML350 Blend Door Actuator replacement
31:45
HOW TO FIX BROKEN DOOR LOCKS - ML55 AMG W163
17:58
ANDERZÉN
Рет қаралды 6 М.
MERCEDES ML-Calss W163 How to Remove Replace Overhead Console
2:32
If Barbie came to life! 💝
00:37
Meow-some! Reacts
Рет қаралды 52 МЛН