W204 C-Class - Complete Front Brake Replacement

Рет қаралды 768,231

8 жыл бұрын

!!!Achtung / Attention!!!
Das oben gezeigte Video dient nur zur Veranschaulichung und befähigt ungeschulte Personen nicht zur Durchführung von Arbeiten an der Bremsanlage. Arbeiten an der Bremsanlage müssen von qualifiziertem Personal durchgeführt werden! Ich übernehme keine Haftung!
The video above ist only for demonstration and gives you not the ability to work on the braking system. Only qualified personal can work on the braking system. I assume no liability!

Пікірлер: 468

@pristaxau 6 жыл бұрын

NO WONDER WHY GERMANS ARE KNOWN TO BE THE BEST ENGINEERS....THE GUYS WORKSHOP AND TOOLS ARE SO CLEAN...AND THE WAY HE WORKS, SO ORGANIZED ...CONGRATULATIONS WAVECEPTOR!!!..

@philippm.1271 5 жыл бұрын

that's something every mechanic learns here first. Sort your tools, use them like they are designed to and after every job clean them and clean your whole working area - then the next job.

@sachellebabbar9005 5 жыл бұрын

LOL at the guy pinning this and the amazement people have with a simple brake job.

@emreas1 5 жыл бұрын

stupid comment

@kevatnorthfield 5 жыл бұрын

@@emreas1 unfortunately a true comment

@mailtoray 5 жыл бұрын

@@zzztubazzz dont bring your fucking cheap shit 79.99 change break pad to a job that has been charged over $300

@GearJonny 8 жыл бұрын

I usually watch car detailing, brake upgrades and similair and you have everything above and in high quality and great editing... im in love 😂

@user-um5lh8hs9t 4 жыл бұрын

Normalerweise lobe ich so so selten aber ich muss sagen ich bin echt begeistert von der gründlichen Arbeit. Alles wurde 100% gemacht. Mit Drehmomentschlüssel, einfetten und Drahtbürste... Und die Schnelligkeit war auch sehr gut! Achja und ein Pluspunkt noch für die Kamera+Ansicht!

@yucellip4497 4 жыл бұрын

Kennst du die Drehmomente ? Wenn ja wäre es nett von dir mir die zu schreiben liebe grüsse

@indenture 5 жыл бұрын

That was impressive. Something to aspire to in my home garage. It's interesting how you can watch the same mundane process (brake replacement) and tell the difference between the pros and amateurs.

@tramlad2 4 жыл бұрын

Great job, the attention to detail, ensuring all surface rust removed, all done to the highest standards, a quality job, done correctly, if only all garages worked to the same high standard

@nasa1985 8 жыл бұрын

You sir are a seriously good mechanic! So much perfection and care in your work. If you where in the uk I'd bring my car to you whenever some work needed doing. Great video absolute pleasure to watch you at work.

@WaveCeptor22 8 жыл бұрын

+NASA 1 Wow, thank you very much :)

@andrewstones2921 4 жыл бұрын

The best video I have seen on W204 front brake change, very nicely made and top quality workmanship too.

@rogerserafin 7 жыл бұрын

Yet, another perfect procedure. Excellent.

@orangerunner88 8 жыл бұрын

Nice job! I'm totally impressive by the work precision and accuracy of the work replacement done by the German. Efficient, accurate, precise and professional.

@WaveCeptor22 8 жыл бұрын

Thank you very much :)

@orangerunner88 8 жыл бұрын

+WaveCeptor: The way you handle the tools, decide and position the tools on the working bench, and calibrate your torque wretch really show your professionalism.

@breadwinneryt 6 жыл бұрын

I agree. The job is so good i'm watching this for entertainment and not to use it as a DIY.

@CRBN74 4 жыл бұрын

Great job! I think this is the first time I see a brake job being done properly from beggining to the end. Cleaneing what is necessary, not using useless greasing, attention to tightening torques, etc. This is in fact a simple job, the importance is in the details. Again, great job. This car was enginnered to deserve this kind of professionalism.

@jamesmcparland6778 8 жыл бұрын

Only said tongue in cheek. Very much appreciate your excellent and clear work. Thank you

@malasyu 3 жыл бұрын

Very organised just like a surgeon. Hope all garages do this. I wish I can take my car to this garage. a pleasure to watch this guy.

@rafiwa8573 7 жыл бұрын

Wow so well done. I wish I had more videos like this so I could do more things myself on my Mercedes rather than let the dealer rip me off. Excellent quality and professionalism. Please more videos.

@TheSanderPander 7 жыл бұрын

Love the end with brakefluid (Y). Nice work !

@gbonze1783 5 жыл бұрын

Yes, being organized is always first. Great job man 👍

@WaveCeptor22 5 жыл бұрын

Thanks, man :)

@zorkman111 5 жыл бұрын

Wow, this is probably the most excellent quality brake job that I've ever seen. Is this how services are performed at Mercedes dealerships? If so then the cost is much more justified if this quality and attention to detail is consistently enforced.

@shishuali4821 5 жыл бұрын

excellant job, it was a pleasure to watch, thank you

@Momo-vy4xw Жыл бұрын

I did my oil change and brakes myself thanks to WaceCeptor's videos, the only thing that would make them perfect would be to display the torque specs. Other than that, thank you !!

@ibanezrg233 6 жыл бұрын

Ja, Deutsche Gründlichkeit und Ordnung. Super 👍

@kornelislamain4806 5 жыл бұрын

Deze monteur is voor mij de “ echte “ monteur heel goed gedaan 👌👌👌

@lkitover 3 жыл бұрын

nastia

@jperson03 5 жыл бұрын

look how clean the floor is...this is art

@Alps6408 5 жыл бұрын

Takes this guy 20 minutes, would take me half a day haha. I can watch this stuff for hours, and be more confident with my abilities. Infact I have.

@japanluv 5 жыл бұрын

Thats ok. Replaced my discs and break pads to the rear a while ago. It did take me more than probably in a garage but I prefere buying the tools instead of the labour for it then doing myself as much as I can and keep the tools for future similar jobs:D Dont give up. I wish all mechanics were like him. Its hard to find good quality and tidy mechanics.

@12taskforce 4 жыл бұрын

I do this all on jack stands and it takes me around 45 to do them in my car.I try not to get discouraged when I see videos like this as they have lifts and every tool imaginable

@blackjack444.... 4 жыл бұрын

Time is money

@rontruocchio5744 Жыл бұрын

different world when you have the benefit of a lift

@SuperKhaledmostafa 8 жыл бұрын

I love ur videos man like the way you work on car wish ur shop was here in Canada keep it up

@WaveCeptor22 8 жыл бұрын

+skm gaming hd Thanks, man :)

@magbenz3457 3 жыл бұрын

Excellant job Thank you for your videos👍

@lourencovalle8621 4 жыл бұрын

BOA NOITE. (GRANDE SIRURGIAO ) COMO SEMPRE PERFEITO O RESULTADO. DETALHE AS RODAS LIMPAS (ISSO NÃO TEM PREÇO ) FOI PERFEITO PARABÉNS PELO TRABALHO APRESENTADO

@Jackfromstatefarm 4 жыл бұрын

that slow mo, sold it for me, i love you lmao

@johnwet5798 5 жыл бұрын

Professional tools which I have ever seen.

@andyhuang7526 5 ай бұрын

At 100000 miles, I just replaced all the brake pads! This time around, I am going to replace all including the rotors but I will take the rotors out for service and then put them back ! Rotors are very expensive nowadays ! 😊

@TheKebabCompany 7 жыл бұрын

Did I just read BMW Group on that brakefluid container? :) hahaha

@WaveCeptor22 7 жыл бұрын

Yes xD

@jasonshalt3925 5 жыл бұрын

ow yeah! you did! :D

@deltaline8784 2 жыл бұрын

Sensationell gute saubere Arbeit! Da würde ich meinen Sternwagen auch gerne hinbringen!

@unikatil405 6 жыл бұрын

Whau! Sauber gearbeitet bin überwältigt!!!

@eduardofalcao323 5 жыл бұрын

Congrats warrior! Perfect conduction ;-)

@wickedmv 7 жыл бұрын

Everything is spot on with a proper way to service brakes. However I usually open the bleeder screw to avoid dirty fluid back into the reservoir while returning the caliper piston. Especially with ABS vehicles.

@iisectionn 7 жыл бұрын

Nice job looks great!

@Rover620TiVitesse 5 жыл бұрын

Opening the bleeding valve when pressing brake cylinder to the caliper helps to remove overheated and worn brake fluid and will prevent from pushing back to the system .

@katiamir4150 4 жыл бұрын

Top Arbeit sehr gute video

@abhu1420 4 жыл бұрын

Very good job 👍🏼

@dies_das_allerlei 6 жыл бұрын

Gute Arbeit. Alles nach Hersteller-Vorgabe mit Drehmoment und ordentlich gereinigt. Leider viel zu selten der Fall :-/

@plus-tom 4 жыл бұрын

Und bei 8:06 ? Bestimmt nicht nach Herstellerangaben.

@PhillipJ110 4 жыл бұрын

Und da fragen sich die Leute wieso es bei Mercedes soviel kostet

@plus-tom 4 жыл бұрын

@@PhillipJ110 Genau. Warum es Mercedes soviel kostet? Es liegt vermutlich daran, dass bei Minute 8 der Kolben verkantet zurückgedrückt wird und dabei innen die Flächen zerstört werden. Daher wird es später eine erneute Reparatur geben.

@Ljet600 7 жыл бұрын

Danke!!! Super job!

@TheChrisco1969 3 жыл бұрын

Amazing work

@nelio59000 8 жыл бұрын

The mecanicle is very Easy for the Mercedes good job man !

@patrik2259 8 жыл бұрын

Are Mercedes-Benz OE Brake pads ATE or TRW? I ordered pads online for E-Klasse and got TRW in MB label box, but pads only labeled TRW.

@aligame677 6 жыл бұрын

Super video und was ist noch sehr gut von dir finde. Du antwortest auf fast fragen. Weiter so. Ich habe dich sofort aboniert :)

@WaveCeptor22 6 жыл бұрын

Danke :) Der Sattelhalter wird mit 115 Nm festgezogen der Sattel mit 34 Nm.

@aligame677 6 жыл бұрын

WaveCeptor danke für die super schnelle antwort

@rafsab8 4 жыл бұрын

at the beginning do u have to take some brake fluid out in case when calliper pistons pushed back causes it to overflow ?

@Liberaltedjo 5 жыл бұрын

nice video ! my c230 got DTC 0521 : the charge movement flap (cyl 1) has malfunction, what happened with my engine ?

@soundmiami 5 жыл бұрын

Fascinating. like watching a ballet I've seen a hundred times perform faultlessly.. However I'm shocked there is not an official Mercedes Brake Caliper Hose Tension Release Support Tool. (I too use a heavy wire hanger) and what do have you guys have against brake cleaner? Some environmental thing?

@michaelbierbaum2201 5 жыл бұрын

Einfach super gemacht

@jeffroh8444 2 жыл бұрын

It looks like art. amazing. It's impossible to do by DIY.

@eddielam9750 7 жыл бұрын

hi I have A question want to ask ?? if my car is Mercedes Benz C 350 I want to ask you I want to do a brake job for myself but I didn't know how many foot pound to tight for brake clipper and clipper mount too , So would you mind to tell me?? Thank you

@Matteo-mz7op 5 жыл бұрын

Congratulations! Very professional. I have a question: do you think is it dangerous to retract the caliper piston with old brake fluid? Is it safe enough to change the brake fluid before retracting it, or is it better to retract it with the bleeding valve opened so that fluid doesn't go back to the ABS unit? Thank you very much

@christiancoates 4 жыл бұрын

Great video

@ademc8872 5 жыл бұрын

What's your expierence with ATE? Personally i've always used ATE and been very satisfied with the performance.

@BaldurM 8 жыл бұрын

Sehr schön, Danke!

@1224ALEXIS 8 жыл бұрын

amazing video

@Jopakilo 5 жыл бұрын

nice job. But I have few questions hope guys can answer 1. no anti-seize required on the both edge of brake pad? 2. can the wheel be over torque? The wheel was already torqued with spec with impact air gun then torque again with torque wrench.

@Sherifo 8 жыл бұрын

Nimmst du am Anfang Bremsflüssigkeit aus dem Behälter raus, oder fügst du etwas ein? Würdest Du an meinem W204 auch die Bremsscheiben/Beläge wechseln? In welcher PLZ würde das dann stattfinden?

@Noise400 8 жыл бұрын

Man nimmt etwas raus weil beim zurückstellen des Bremskolbens geht Bremsflüssigkeit zurück in den Behälter.

@johnnyk6906 4 жыл бұрын

high quality work which is not common in typical repair shop. with that note, how come you don't recommend/suggest brake fluid flush with each brake pad replacement? I do mine at home and add extra 5 mins on each brake to flush the old fluid out.

@lorenzherrmann5524 7 жыл бұрын

Was sind die beiden Anzugsmomente der beiden Schrauben die im Video mit dem Drehmomentschlüssel angezogen werden?Danke

@leonandric1197 5 жыл бұрын

Nehme an 110-120nm

@iulianaugustin9371 4 жыл бұрын

Good Job,Nice work.Top Top Top¡

@tedkabg 2 жыл бұрын

What is the force applied on those bolts holding brake bracket - 12/16 J? It appears you use dynamometric key.

@ureshwijayasinghe1135 3 жыл бұрын

Can you please tell me the torque specs for those bolts.

@SuperGlenn1966 4 жыл бұрын

Hello. What year is this car? My 2010 C300 has drilled front rotors and solid rotors on the rear.

@christophevillers5585 8 жыл бұрын

Felicitation...continuer....merci

@guyroland4088 5 жыл бұрын

it"s very good work :)

@vv6816 3 жыл бұрын

hello can you tell me please what kind of grease u have at 9.06 on the video ?

@martynasvalancius4916 5 жыл бұрын

thumbs up for the matte grey paint sprayed brake discs :D

@AlexGreenwoodUkulele 4 жыл бұрын

Yeah, coated discs are awesome, bed in nicely too.

@motofan16 5 жыл бұрын

Great video! is it not necessary to lubricate the brake pad sliding surface? Thanks.

@WaveCeptor22 5 жыл бұрын

Mercedes don't allow that on this brake system.

@rolzermen1 4 жыл бұрын

neat job, wish we had that kind of shop in Mexico..

@gabifilip9976 6 жыл бұрын

Nice job!

@Trades46 7 жыл бұрын

Lots of care and detail put into your work, thank-you for posting. I have question: I heard Mercedes design their OEM pads to wear uneven so pads & rotors have to be replaced together, is that true? Car is C350 and has 50,000km, can I just replace pads or must do entire brake replacement?

@WaveCeptor22 7 жыл бұрын

Thank you :) Normaly the rotors have twice the durability of the brake pads. To play safe you can measure the thinkness of the rotors. The wear measurement have to be engraved on the rotor itself.

@StopDropandLOL 8 жыл бұрын

Always a good quality video from you. I've seen this car before is it yours as well? :)

@WaveCeptor22 8 жыл бұрын

+StopDropandLOL Yes it is :)

@joaopaz3263 2 жыл бұрын

Very nice

@eddielam9750 3 жыл бұрын

I have same C CLASS can you tell me how much foot pounds to tight caliper bolt ? And caliper bracket too ?

@hossamosman409 4 жыл бұрын

Very good and fun 💐

@zathan796 4 жыл бұрын

Hey gutes Video..hab ein w204 c350 baujahr 2007. Ist das die gleiche vorgehensweise? Ich habe bei einer Bremsbacke so eine art Führung. Das wirs wahrscheiblich in den Kolben gesteckt.oder?

@jordanian4988 5 жыл бұрын

كل هذا الوقت ، فقط لتغيير إطار الفرامل واحد فقط ، عمل رائع

@johnpeterson7542 6 жыл бұрын

great mercedes technician certainly not a greasy mechanic

@TheDarkkus 5 жыл бұрын

Top Arbeit! Aber warum kein Plastilube zb. auf die Bremsbeläge- Köpfen bzw. den Edelstahl Führungsschienen? Gruß

@haydouramhamad7865 5 жыл бұрын

Thank you so much ur perfect

@gregorydeleeuw 5 жыл бұрын

Hi man, thanks for your videos in general, they are so satisfying to watch :) I wonder, do you plan on doing video about Smart Car, just in case because it's stil Mercedes isn't it?

@WaveCeptor22 5 жыл бұрын

Thanks :) Yes, later that year i will try to do some videos of our Smart W453.

@isaiasuribe4014 4 жыл бұрын

NO ENTIENDO DE MECANICA PERO ES ENTRENIDO VER ESTE TIPO DE TRABAJO EN ESTE TIEMPO DE CUSRENTENA SALUDOS.

@manfredjess5329 7 жыл бұрын

Was für Fett benutzt Du für die Führungsbolzen?

@DjComets 3 жыл бұрын

Great Job

@kevinbaird7277 4 жыл бұрын

Great job, very professional, only thought, when topping up the brake fluid, why was it necessary to remove the filter, surely it's job is to catch contaminants from the bottle used for topping up.

@WaveCeptor22 4 жыл бұрын

Its not necessary to remove the filter. My fault.

@MotoBugalter 7 жыл бұрын

awesome work

@Nevem13 8 жыл бұрын

Could you advice pls.1.6 cgi fault code p06DA00Actuation of the valve of the oil pump in combustion engine has an electrical fault or open circuit....

@WaveCeptor22 8 жыл бұрын

sorry, i have no idea :(

@cristidughir1728 2 жыл бұрын

SUPER! DANKE!

@tm40fly 8 жыл бұрын

Hello :) Tell me please for each screw what kind of NEWTON force you use? Thank you, Andrei

@WaveCeptor22 8 жыл бұрын

+Dumitrascu Andrei Screw at 10:52 for the brake disc: 10 Nm, two srews at 11:55 120 Nm and the two srews at 15:00 30 Nm.

@tm40fly 8 жыл бұрын

+WaveCeptor Hello, thank you so much :)

@MrNanah38 Жыл бұрын

Where do you buy the parts from?

@mariowoodsN5 2 жыл бұрын

Nice job, all those awesome tools but no blow gun to remove dust?

@berkeekurtt 4 жыл бұрын

hi friend my heater 1500 meter over not working.what do to work?

@robinbasulto9313 5 жыл бұрын

Where you using impact sockets?

@D.4N13L 5 жыл бұрын

Job done by the book,I guess all the 81 dislikes are from Bmw owners 😄

@murimuri6595 7 жыл бұрын

Sehr professionelles Arbeiten was mich interessiert sind die Drehmomente

@WaveCeptor22 7 жыл бұрын

Sicherungsschraube für die Bremsscheibe: 10 Nm Schraube Bremsträger an Achsschenkel: 115 Nm Schraube Bremssattel an Bremsträger: 34 Nm

@murimuri6595 7 жыл бұрын

WaveCeptor danke

@necoelpablo2922 4 жыл бұрын

Würde gerne bei mir die bremssatteln wechseln. Habe die kleinen drauf, c klasse w 205. Würde gerne größere rein machen. Was muss ich da alles wechseln?

@amjadkhan-jv6xj 4 жыл бұрын

Great video, only wished you could give out the torque setting for nuts.

@TheVicOlive 3 жыл бұрын

Would have been very useful if you had shown a closeup shot of the the torque wrench settings !

@Vherok 4 жыл бұрын

Forgot to put the new bolts in with new thread lock on them? oops. I assume you took out the used ones out, and put the new ones in, off camera (because you looked right at them on the lift lol) Thanks for the video!