Wacker Jumping Jack Bellows Replacement

Wacker Jumping Jack Bellows Replacement - DHS Equipment

Рет қаралды 134,276

10 жыл бұрын

www.DHSEquipment.com shows you step-by-step how to replace the bellows on your Wacker Neuson Jumping Jack rammer.
This video applies to BS45Y, BS52Y, BS60Y, BS62Y, BS65Y, BS105Y, BS500, BS600, BS700, BS50-2, BS60-2, BS60-4, DS70, DS72 and DS720.

Пікірлер: 160

@jackwilliam2226 3 жыл бұрын

This would have to be one of the most comprehensive instructional procedures I have ever seen.!

@davedhs6821 3 жыл бұрын

Thank you. Glad it was helpful !

@projeanant9564 3 жыл бұрын

great video mate, you are a very good instructor, factual whats important and the correct steps ...time to get my hands dirty

@DHSEquipment 3 жыл бұрын

Thanks. Glad you found it helpful.

@VyamDRC1GreenM070 10 жыл бұрын

Helpful video, I just bought a used Wacker jumping jack rammers model BS 60 Y which needs a bellows boot replacement. Without watching your video I'd probably damage something or not be able to do the service. Cheers!!!

@DHSEquipment 10 жыл бұрын

happy to hear it. let us know if you need any further information. Dave

@mattmillz8125 Ай бұрын

Had a job made so much easier because of your explanation! Thanks a lot man!! Cheers!

@DHSEquipment Ай бұрын

Glad we could help!

@irecycleable 8 жыл бұрын

Thank you! Your a gentleman and scholar!

@andyserat1069 7 жыл бұрын

Thanks David for all the info and for your time.

@davedhs6821 7 жыл бұрын

You're welcome. Give us a shout if you need any help or diagrams etc etc. Thank you

@michaelcarter3974 3 жыл бұрын

Excellent video! Great teacher! Thank-you very much.

@davedhs6821 3 жыл бұрын

Thank you

@roccouy 4 жыл бұрын

Thanks for the video!!!! I did it with no trouble.!!!! Great explanation

@davedhs6821 4 жыл бұрын

glad it was helpful.

@natecrx88 4 жыл бұрын

Great video. I had to attach the bottom of the bellow before doing that pop technique.

@DHSEquipment 4 жыл бұрын

Thank you..

@DHSEquipment 8 жыл бұрын

thanks Jose, hope it helped !!

@jimhunter00 10 ай бұрын

Fantastic Video! Thank you so much for your thorough video. Helped me out a ton

@DHSEquipment 9 ай бұрын

Awesome, thanks for watching!

@jerrellstrawn6409 9 жыл бұрын

Thanks; this was a big help.

@willedknight4813 2 жыл бұрын

I JUST WANTED TO THANK YOU MAN YOU HELPED ME ALOT.

@DHSEquipment 2 жыл бұрын

Great, glad to hear that!

@alexaguil6747 6 жыл бұрын

Thanks so much , awesome video.

@davedhs6821 6 жыл бұрын

Glad it was helpful

@emiliobelloescamilla8182 5 жыл бұрын

EXCELLENT CLASS!!!! THANK YOU VERY VERY MUCH!!!!! MUCHAS GRACIAS MANO!!!!

@davedhs6821 5 жыл бұрын

Thank you

@robertomata562 7 жыл бұрын

i have other question y my tamper engine makes louder noise? if can help me plz? thank u so much

@mattobermiller5041 5 жыл бұрын

THANK YOU FOR MAKING THIS VID!!!!!!!!

@davedhs6821 5 жыл бұрын

You're welcome. Need any parts or specs or manuals, just give us a shout. Thanks

@e.b.sarceno8833 8 жыл бұрын

Great video David Schatz

@davedhs6821 8 жыл бұрын

+Elmer Borrayes , Thank you, Hope it comes in handy !!

@robertdelbusto 3 жыл бұрын

Thanks man 👏🏽 god bless you

@DHSEquipment 3 жыл бұрын

Glad it helped !!

@spunkmonkey5000 8 жыл бұрын

My wacker seems to have a slow foot speed, how can I improve this?..

@jd-uo8hc Жыл бұрын

Great informative video. Thanks!

@DHSEquipment Жыл бұрын

Thanks for watching!

@guitar1587 9 жыл бұрын

Thanks so much!!!

@gc47 4 ай бұрын

Very well explained!! Thank you very much..

@DHSEquipment 3 ай бұрын

Thanks for watching!

@mschwennes 9 жыл бұрын

Don't suppose you know where I can get a new retaining clip for the pin that joins the crankcase and ramming system....I checked your DHS website but it doesn't show the clip as a part I can order. Wacker part number 2003749 When I removed one of the old clips it went "sproing" into, apparently, another dimension.

@DHSEquipment 9 жыл бұрын

Our pleasure

@robertomata562 7 жыл бұрын

thank you so much

@timothyselna6186 5 жыл бұрын

Hi David, wondering why the lower end 10-w-30 oil can not be installed through the site glass on occasion? I have a crack in the outer aluminum casing and possibly in the boot/ loose clamp as well so need to top off regularly I am thinking to keep from jumping erratically

@davedhs6821 5 жыл бұрын

Hi Tim, you can put the oil in that way also. On some models it is the only way. If your oil level is half way in the sight glass, your engine speed is correct and the engine is running correctly and you are not over compacting or compacting material not suited for a rammer, you should not be jumping erratically. When you changed the oil, did it have any metal particles or plastic particles in the old oil ? Thanks

@chrishare3981 3 жыл бұрын

very helpful

@davedhs6821 3 жыл бұрын

thank you, glad it helped

@timothyselna6186 5 жыл бұрын

Hi David, the BS45 maintenance kit I purchased came with a quart of four stroke oil. Presuming this is for the engine, not the rammer lower end. Thank You

@davedhs6821 5 жыл бұрын

Hi Tim, The BS45Y has a 2 cycle engine and needs no engine oil. That oil is for the lower percussion system. Halfway in the sight glass is what you want. Fill it to the half way mark, run the unit a minute or so then adjust as needed. You will not be using the complete quart on that model. Thank you

@1gkgrandpa Жыл бұрын

Is it possible for the clutch to wear out the clutch hub. What should be distance between 90mm clutch and inside of clutch hub. Love your videos thank you

@DHSEquipment Жыл бұрын

Not sure on the exact clearance measurement, but it should be even all the way around the clutch. Sometimes one side of the clutch will wear prematurely cause it to wear on one side more than the other

@DGM327 3 жыл бұрын

Good old’ KZfaq Cheers for the video 👍🏽

@davedhs6821 3 жыл бұрын

Thank you. Hope it was helpful.

@lauriemahony526 7 жыл бұрын

thanks david i found if the bottom of the bellow doesn't go all the way down a block n light tap from a hammer gets it there without any damage.

@davedhs6821 7 жыл бұрын

Yes, light tap from a mallet or similar will get it seated too. Thanks for mentioning that..

@wildmanargo Жыл бұрын

Good job thank you very much 😊👍

@DHSEquipment Жыл бұрын

Our pleasure! Thanks for watching

@veepsgarage Жыл бұрын

Great video. I’m replacing the boot on my Bs52y. Your trick got the top of the bellow seated but I can’t get the bottom on. Any suggestions?

@DHSEquipment Жыл бұрын

The boot could possibly be upside down. The boot that is used by this machine has very close dimensions but they are slightly different. The top of the boot should measure: OD: 5-1/4" ID: 4-7/8" The bottom of the boot should measure: OD: 4-3/4" ID: 4-1/16"

@1977np Жыл бұрын

Hi thanks for this video. I need to change one on my cheaply bought chinese rammer (HCR90). What oil goes in this? Thanks.

@DHSEquipment Жыл бұрын

Hi Nikhil, not sure what that specific model called for when it was manufactured, but usually it is a SAE10W-30 that goes in the leg.

@bigmotor3845 6 жыл бұрын

Thanks for the help!!!

@davedhs6821 6 жыл бұрын

You bet

@luisespino382 6 жыл бұрын

How to fix my jumping jack on idol still jumps around

@luisespino382 6 жыл бұрын

How to fix my jumping jack and low idle still jumps around

@davedhs6821 6 жыл бұрын

At low idle if it wants to jump you likely have a broken spring or something floating around in there wedging between the clutch shoe and the drum. Can you confirm what rpm this is happening at ?

@paulfoldes921 Жыл бұрын

what kind of oil you using thanks

@ChannelZeroOne 3 жыл бұрын

Are some bomag and wacker boots compatible? I have a BT65. I ask because the Wacker is about 1/3 the price for a similar sized bomag that's $250.

@davedhs6821 3 жыл бұрын

Sorry, but they are not. We do have the BT65 bellows for a little less than that, but I have no other bellows that will work. Thanks stores.dhsequipmentparts.com/bellows-bomag-bt65-bt65g-bt80d-bvt65-part-54210252/

@howardharry1862 8 жыл бұрын

do I need spical tool ?

@joseaparecido5747 3 жыл бұрын

Bastante criativos o vidios ja me inscrevi

@DHSEquipment 3 жыл бұрын

Thank you. Glad it helped

@droguinix 5 жыл бұрын

Gracias por la ayuda

@davedhs6821 5 жыл бұрын

DE NADA, ME ALEGRO PODER AYUDARLO

@dillanwaters6125 5 жыл бұрын

Dave, I'm about to change the bellows on my bs50-2. What kind of oil do you suggest? Also should I use blue or red loktite? Any chance you can give me the torque specs?

@davedhs6821 5 жыл бұрын

Hi Dillan, 10w30 for the ramming system oil. 1/2 - 3/4 in the view. the sight glass should be tightened to 6 ft lbs. The drain plug is 40 ft lbs. the drain plug could use a little blue threadlock on it. Good luck

@dillanwaters6125 5 жыл бұрын

@@davedhs6821 sorry Dave I think I may not have been specific enough. I could use the torque specs on the 4 main bolts at the mid section where you remove the pin and also the clamps. Thanks for the quick reply.

@davedhs6821 5 жыл бұрын

@@dillanwaters6125 , sorry about that, I missed the bellows part and thought you were doing an oil service only. 4 bolts get blue thread lock and 32 ft lbs, the clamps get 10 ft lbs. Thanks

@dillanwaters6125 5 жыл бұрын

@@davedhs6821 your the man!!!

@alanloader8291 9 жыл бұрын

Hi David, Thanks for a very informative video. This is the first time I have needed to work on a rammer and it helped me understand the tool better. One thing I would like to ask. 1 of the machines I am working on has a fault. The foot is not locked into place. It wacks ok but when machine off I can twist the foot around. I presume this is not supposed to happen. I cant take bottom plate off due to not having the tool to compress spring. Can you tell me what is broken? I am in the UK and cant find much info here. Thanks Alan

@DHSEquipment 9 жыл бұрын

Hi Alan, If everything is working ok, but the foot can rotate, it is most likely a loose bellow clamp. The clamps are the only thing maintaining the foot alignment. Go to the video near the end. It show the rotating foot. Good luck and email us if you need anything. Thanks Dave

@DHSEquipment 9 жыл бұрын

Glad to hear it.

@JlhIncExcavation 6 жыл бұрын

Thanks

@davedhs6821 6 жыл бұрын

hope it helped !

@howardharry1862 8 жыл бұрын

bs700 when u ram up engine it won't jump and when it starts jumping it well skip high a jump ?

@bushratbeachbum 3 ай бұрын

Hahahahahahahahahaha. Why could there POSSIBLY be zero replies to this comment?! Fekkin hell.

@joseaparecido5747 3 жыл бұрын

Parabéns

@DHSEquipment 3 жыл бұрын

Thank you

@robertomata562 7 жыл бұрын

i will thank u

@gustavodelgado7906 8 жыл бұрын

Hi!! DavidI have great problema with the Dynamac compaction equiment LT6000This pass gasolina to motor oil, I would like you or any body can help to me or give a clue for soluttion . I will be tanks. I live in Mexico In Morelia City state Mich. the best regard

@davedhs6821 8 жыл бұрын

+Gustavo Delgado Your carburetor is leaking in to the crankcase. Maybe a stuck float needle or damage inlet seat. That's where I would start. Good luck

@peterdyer9640 2 жыл бұрын

Hi David i am having problem with the carb and having problems with spares can i chance the carb Thanks

@DHSEquipment 2 жыл бұрын

Hi Peter, If you are having trouble with your machine, please give us a call with your model and serial number. We can then provide you with the carburetor you are looking for. ‭(866) 611-9369‬

@whatthehell2592 3 жыл бұрын

Great video, will help me a lot when taking mine apart! I'm thinking the 31 down votes were soy boys thinking it was something else or thought it would be like changing a light bulb!

@DHSEquipment 3 жыл бұрын

Haha, You never know .. Any questions give us a shout. 866-611-9369 Glad you liked it.

@whatthehell2592 3 жыл бұрын

@@DHSEquipment Thanks, replaced the bellows yesterday. Definitely made it easier to lift the top off with a chain hoist. Now as for snapping the bellows in place....not so much...that was a struggle. Not sure if it was my age and my subsequent weakness due to age or the bellows. I'm guessing my age and weakness. Now onto an engine tuneup. Thanks again for the video!

@DHSEquipment 3 жыл бұрын

@@whatthehell2592 glad it worked out for you..good luck on the engine.

@DHSEquipment 10 жыл бұрын

The engine is off the machine to be used in a future video. It does not have to come off for this bellows replacement..

@DanielHernandez-qm2iw 5 жыл бұрын

Hey David very helpful videos,but I can't find your diesel engine repair video.

@jesuspatino4231 3 жыл бұрын

I have a old wacker 08 wm 80 I need replace the green plastic boot Someone know where I can ge it please i check on amazon but i can't find any

@davedhs6821 3 жыл бұрын

That is the engine. We would need to know the model of the machine itself. bs45y, bs60' bs600 etc. any info from your data tag will be helpful. thank you

@jesuspatino4231 3 жыл бұрын

@@davedhs6821 i take a look Thank you so much for responding me

@reiswich 4 жыл бұрын

Hello, can you also record in German? Thanks in advance!

@Hazardflag02 9 жыл бұрын

I guessed this exact way. But for the love of god I can't get the bellow back on. The top snapped right in the bottom no. can't get past the bevel grrr

@DHSEquipment 9 жыл бұрын

Little bit of great at the bevel and make sure it's even all around. If that doesn't work, set the bottom of the bellows in hot water for a couple of minutes. That will soften it up a little. Get a clamp on it quickly when it goes on so when it cools, it will cool to the correct size and shape. GOOD LUCK

@Maxima18001 7 жыл бұрын

hi sr. we have to necessarily remove the engine?

@DHSEquipment 7 жыл бұрын

Hi, You do NOT have to remove the engine. Our engine needed to be rebuilt and it was easier for the video to show the procedure. Thank you

@Maxima18001 7 жыл бұрын

David Schatz thanks for answer sr. I have another question: after to replace they fueller what kind of oil can i use? and finally do you have another vídeo about how clean the carburator?.

@davedhs6821 7 жыл бұрын

Hi, 10w30 motor oil for the lower unit. I do not have any carb rebuild videos at this time. There are likely many videos out there already. These carbs are not specific to Wacker so you can search for Tillotson or Walbro rebuild videos. Hope that helps..

@ronhollifield483 7 жыл бұрын

my mt-65h starts jumping as soon as you start it. why is this happening?

@DHSEquipment 7 жыл бұрын

Sounds like a broken clutch spring or similar. If as you pull the engine over as to start it, the machine starts to move up or down with it, pull the engine and check the clutch area. Thanks

@juanarceolivares3976 7 жыл бұрын

mister excelente video por favor traducir al español

@davedhs6821 7 жыл бұрын

Hello & thank you. I can't translate that to spanish for you, but we have people here that can help you in spanish. Call us at 866-611-9369 or 954-532-2142 Thank you

@AutumnsVeiling 6 жыл бұрын

Just curious what type of oil? Thanks

@davedhs6821 6 жыл бұрын

regular 10w30 motor oil. Thanks

@jesuspatino4231 3 жыл бұрын

@@davedhs6821 hi dave I have a old wacker 08 wm 80 I need the green plastic replace it I can't find it I try amazon and nothing

@davedhs6821 3 жыл бұрын

@@jesuspatino4231 That is the engine. We would need to know the model of the machine itself. bs45y, bs60' bs600 etc. any info from your data tag will be helpful. thank you

@anthonyanna7595 4 ай бұрын

Can you run then without the bellows ?

@DHSEquipment 3 ай бұрын

No, the bellow keeps the oil contained in the lower leg of the unit

@yaseeniqbal4623 3 жыл бұрын

Only wacker.? Is that some subsidiary of wacker neuson or chinese copy?

@davedhs6821 3 жыл бұрын

Years ago Wacker Neuson was only Wacker so they are the same.

@yaseeniqbal4623 3 жыл бұрын

@@davedhs6821 oh.. Thanks for the info :-)

@joelramos3270 9 ай бұрын

Great presentation David! Where is your shop located!

@DHSEquipment 7 ай бұрын

Thanks Joel! We're in Pompano Beach, FL (4100 N Powerline Rd, Suite G3)

@joelramos3270 6 ай бұрын

@@DHSEquipment How much for the kit? I’m in California

@DHSEquipment 6 ай бұрын

@@joelramos3270 Hi Joel, it depends on which model you have, but we have most available on our website: stores.dhsequipmentparts.com/search.php?search_query=wacker%20bellows%20kit

@DHSEquipment 6 ай бұрын

Or feel free to Call us at 866-611-9369

@user-lt7si5no1t 4 жыл бұрын

Мужик ти молодець!Зроби пожалуйста Рускоязичною версию своих видео!!!!

@davedhs6821 4 жыл бұрын

Дякую, мій друг, на жаль, у мене немає можливості це зробити для відео. Я покладаюсь на текст GOOGLE TRANSLATE для тексту. Вибач за те.

@user-lt7si5no1t 4 жыл бұрын

@@davedhs6821 дикую!

@reiswich 4 жыл бұрын

Hallo, können Sie auch auf deutsch aufnehmen? Vielen Dank im Voraus!

@davedhs6821 4 жыл бұрын

Hallo, Entschuldigung, das kann ich nicht. Ich wünschte, ich könnte, sorry. Wenn Sie eine bestimmte Frage haben, kann ich versuchen, sie zu beantworten. Danke

@reiswich 4 жыл бұрын

@@davedhs6821 Ich schon gut.Sie haben mir schon per eMail geantwortet.Muss nur noch eine Antwort von Sie bekommen.Wieviel $ oder € wird es komplett(Ware + Versandkosten ) kosten...? Vielen Dank im Voraus! Und Viele liebe Grüße!

@davedhs6821 4 жыл бұрын

@@reiswich ok, ich habe gerade auf die E-Mail geantwortet. Dankeschön

@reiswich 4 жыл бұрын

@@davedhs6821 Hi, I prefer for $ 71.75. Please send me the amount via PayPal to pay. I will pay it immediately. Thanks in advance!!! Hallo, ich bevorzuge für 71,75$. Senden Sie mir bitte den Betrag per PayPal zum bezahlen.Ich werde es sofort bezahlen. Vielen Dank im Voraus!!!

@felyantiare7719 5 жыл бұрын

Muy bueno el video pero podian traducirlo al español

@memoherdez3596 5 жыл бұрын

what kind of oil do you used

@davedhs6821 5 жыл бұрын

regular motor oil, 10w 30. thnks

@memoherdez3596 5 жыл бұрын

@@davedhs6821 no thanks to you man you where yesterdays mvp

@davedhs6821 5 жыл бұрын

memo herdez , thank you, much appreciated !!

@sreckomecilovsek8278 Жыл бұрын

Which oil goes inside?

@DHSEquipment Жыл бұрын

10W-30 oil, which is a standard motor oil. The oil fill level varies for each unit, but it is recommended to fill the oil until it reaches the center of the dot in the sight glass. Subsequently, the tamper should be operated at a low rate before shutting down the machine for a recheck of the oil level. If necessary, the oil should be refilled accordingly.

@howardharry1862 8 жыл бұрын

how to change a clutch ?

@davedhs6821 8 жыл бұрын

+Howardharry Harry , what model machine do you have?

@vincenzofoscolo8324 2 жыл бұрын

Ho David che olio monta la bs600

@DHSEquipment 2 жыл бұрын

The oil in the ramming leg should be changed every 3 months or 300 hours. The oil is a SAE 10W-30, and it takes approximately 30oz of oil. You should fill your machine's oil reservoir to the center of the sight glass located on the front leg of the machine. Then run the machine on a low tamp, let the machine rest and the oil settle in the leg. Check your oil level, it should be in the center or a little above the red dot indicator on the sight glass. Then adjust accordingly.

@gruobn7482 2 жыл бұрын

I don't know what the heck the camera operator was doing. Why did it sound like they were on an old wooden ship in high seas. Were they using some kind of crank up camera? Was the camera operator the tin man and you were saving all the oil for the jumping jack? Maybe they were in a leather gimp suit and it was binding up really bad? Nobody knows.

@Dirtbug473 7 жыл бұрын

Thank you so much!!! I bought the dreaded "Chinese" rammer for my excavation business. It lasted 3 months (20 hrs) and the boot ripped just about in half...made out of a hard rubber/plastic. I had a chance to to buy a 6 yr old Wacker for $1900.00 or a new Chinese...I lost. Do not buy Chinese import...extremely shoddy work...never again. I will buy a good used Wacker. I have a used Wacker w/ no engine but boot is in good shape. Measurements appear to be same...Ill find out. Thanks.

@davedhs6821 7 жыл бұрын

Best of luck !!

@floridagirl386 7 ай бұрын

Was it?

@juanandresachicanoyrojas7887 5 жыл бұрын

Hola

@davedhs6821 5 жыл бұрын

@juanandresachicanoyrojas7887 5 жыл бұрын

Traducirlo a español

@davedhs6821 5 жыл бұрын

Sorry, I am not able to translate the video to spanish. If you have questions, please call, we have someone here that speaks spanish and can help you out. Thanks.

@juanandresachicanoyrojas7887 5 жыл бұрын

Hola como es tu face