How have ya been brother, hope all is well I noticed a bunch of your videos being removed. Love watching your mud vids.
@SomeDamnfoolsAtv7 ай бұрын
Just saw this...didn't have notifications on! Hope all is well with you brother I will be posting more content really soon!
@roughestneck17533 жыл бұрын
420 looks awesome. Also that snorkel looks badass!!! Time to get it dirty!!
@SomeDamnfoolsAtv3 жыл бұрын
Thanks brother!!! I gotta get the top end put it it...then I'm definitely going to get it dirty!!!
@MudmisfitzATV3 жыл бұрын
Can't wait to see it done and in action
@SomeDamnfoolsAtv3 жыл бұрын
Thanks brother I appreciate it!!! Parts for the motor rebuild are already on the way! New stretch should be here this week so I can finish that rear end I'm working on for it!
@daviddavis23213 жыл бұрын
Tim you did a real nice job on the snorkel as always and I know when you finish the other things she will be running like a Honda should.
@SomeDamnfoolsAtv3 жыл бұрын
Thanks brother I really appreciate it!!!
@bbateman343 жыл бұрын
Can’t wait for you to get it ready ready to take a ride with you
@SomeDamnfoolsAtv3 жыл бұрын
It won't be long brother!!!
@johnlocklear28063 жыл бұрын
Expensive hobby my friend I'm right there with you. Gotta 2020 Rubio and 2021 rancher both set up the way I want em. Rode Outback for Easter and bent my tie rod. Waitn on delivery now😟
@SomeDamnfoolsAtv3 жыл бұрын
It is... but haven't found anything more fun!!!
@johnlocklear28063 жыл бұрын
@@SomeDamnfoolsAtv I tell the ol lady all the time it's the most fun u can have with your clothes on. Lmao
@SomeDamnfoolsAtv3 жыл бұрын
@@johnlocklear2806 🤣🤣🤣🤣🤣
@gabenavarre48874 ай бұрын
Were did you get that stretch kit at?
@SomeDamnfoolsAtv4 ай бұрын
Louisiana Don Oglesby on Facebook
@viper2000turbo3 жыл бұрын
Looks good man
@SomeDamnfoolsAtv3 жыл бұрын
Thanks brother I appreciate it!!!👍🤝💪
@kevinmusgrove54313 жыл бұрын
Looking good!
@SomeDamnfoolsAtv3 жыл бұрын
Thanks brother I appreciate it!!!👍💪🤝
@kevinmusgrove54313 жыл бұрын
I have some broken parts on my 650 prairie right now. So I haven’t been able to ride as well.
@SomeDamnfoolsAtv3 жыл бұрын
I hope you get it fixed soon!!!
@dat_boi_jo69413 жыл бұрын
Anyone know how to snorkel a 01 Honda rubicon 500?
@SomeDamnfoolsAtv3 жыл бұрын
If you're in NC I can help you with it
@dat_boi_jo69413 жыл бұрын
@@SomeDamnfoolsAtv yea I’m in nc Close to greensboro but i could take it to you
@SomeDamnfoolsAtv3 жыл бұрын
@@dat_boi_jo6941 give me a couple weeks to get situated and hit me up on instagram messenger@ somedamnfoolsatv
@Twisted-U-Twisted3 жыл бұрын
Nice ride my friend 🇺🇸👊
@SomeDamnfoolsAtv3 жыл бұрын
Thanks brother I appreciate it!!!👍🤝💪
@blazersatving29413 жыл бұрын
2004 f0remen 450 show all best bike ever made
@nolenharper35332 жыл бұрын
Did you stretch it using pipe? On the drive shaft
@SomeDamnfoolsAtv2 жыл бұрын
Brackets and the driveshaft. Don Oglesby on Facebook makes and sells them
@nolenharper35332 жыл бұрын
@@SomeDamnfoolsAtv you don’t know if he used pipe or not?
@SomeDamnfoolsAtv2 жыл бұрын
@@nolenharper3533 no he didn't use pipe. He makes plates to extend the swingarm...and extended the driveshaft...now that has a piece of pipe welded in to stretch the driveshaft
@nolenharper35332 жыл бұрын
@@SomeDamnfoolsAtv yessir that you finally someone who could answer my question
@FzjClay3 жыл бұрын
Love the videos buddy! bad ass setup man. I got a snorkeled 300 and was curious if you ever got your 300’s leak fixed. Mine cut off with the bars under yesterday and I can’t figure out why the carb got water in. Fuel injection is the way to go
@SomeDamnfoolsAtv3 жыл бұрын
It definitely took some trial and error to get the 300 straight! I think I ended up running the carb drain to a vent line... and everything connected to the carb ... everything. And thank you for the compliment brother I appreciate it!!!
@FzjClay3 жыл бұрын
@@SomeDamnfoolsAtv Absolutely buddy! Take it easy man
@milesfox_17172 жыл бұрын
Question for you. I have Don’s 2 inch lift and 3 inch stretch for my 2012 420, do you think 32 Aztecs would fit without removing headlights and cutting stuff up?
@SomeDamnfoolsAtv2 жыл бұрын
Yessir!!!
@michaelliles33282 жыл бұрын
Curious as to where you got the swing arm stretch kit? I have a 2012 Rancher 420 I want to stretch a few inches but can not locate a stretch kit anywhere.
@SomeDamnfoolsAtv2 жыл бұрын
Don Oglesby on Facebook is the guy I get mine from...thanks for watching!!
@420_Tha_Gang2 жыл бұрын
Where can I get that 02 delete at?
@user-jd7ev1hm6r5 ай бұрын
Where did you get your stretch from
@SomeDamnfoolsAtv5 ай бұрын
Louisiana Don on Facebook
@seths91162 жыл бұрын
Can someone please find me the 2.5 inch lift or did he use shock spacers?
@SomeDamnfoolsAtv2 жыл бұрын
Spacers...but I measured it and it only gave me about 1/2 " of lift
@nickruisoutdoors3 жыл бұрын
Did you move?
@SomeDamnfoolsAtv3 жыл бұрын
Yessir
@nickruisoutdoors3 жыл бұрын
@@SomeDamnfoolsAtv what ya do that for I thought you loved that place. Did all that work.
@SomeDamnfoolsAtv3 жыл бұрын
Situation changed.
@coltstell3 жыл бұрын
Do you need vent lines for a Honda because if you do I don’t know how to do it
@SomeDamnfoolsAtv3 жыл бұрын
Yessir you do!
@hunterrains66293 жыл бұрын
How did you do your stretch I have a 2011 Honda rancher 420 and I found a “stretch kit” on eBay but idk if I trust it
@SomeDamnfoolsAtv3 жыл бұрын
Check with Don Oglesby on facebook... he makes them
@philipcopeland68523 жыл бұрын
How do yo clear 32.5 on the front i just do clear my 31,s
@SomeDamnfoolsAtv3 жыл бұрын
Took the support bars out and still scrub a little
@jacobgressett14983 жыл бұрын
Where did you get that light bar?
@SomeDamnfoolsAtv3 жыл бұрын
Ebay. It's a single row slim lightbar
@christianjahn41413 жыл бұрын
Does it feel like the gear reduction has to engage ? Like a stall
@liamvanschaick89573 жыл бұрын
Where can I get a stretch like that for my 08 rancher
@SomeDamnfoolsAtv3 жыл бұрын
Get with Don Oglesby on facebook... he makes them
@JamesSimpson284483 жыл бұрын
32.5s for the polaris? 🤔 What ya think Tim? 🤣🤘🏾
@SomeDamnfoolsAtv3 жыл бұрын
Hell yeah 😎
@reesespeices5163 жыл бұрын
You going to mudbash? Love to ride with you for a little while man!
@SomeDamnfoolsAtv3 жыл бұрын
I wish! I don't think I will be ready in time!😭
@reesespeices5163 жыл бұрын
@@SomeDamnfoolsAtv well if you ever go out to busco put a video up man! I’ll meet you out there for sure!