Wall Frames - How To Get Straight For Plaster Sheeting

Рет қаралды 109,142

8 жыл бұрын

CHECK OUT - www.renovationjunkies.com.au/ For DIY & Renovation Tips.
TOOLS FOR THIS PROJECT - electric plane - amzn.to/1jBi7Wx
Hammer - amzn.to/1QXfwbf
Tape Measure - amzn.to/1NIY2sY
Level - amzn.to/1wTqg0N
Ladder - amzn.to/13EEvey
FOR MORE DIY, Tool Reviews, Renovation Tips and More, Visit -
/ 501183953335817
/ ourbuild
www.renovationjunkies.com.au/
renojunkies/...
/ reno_junkies

Пікірлер: 50

@yechihast 4 жыл бұрын

The only video I could find that actually shows all practical methods. Thank you.

@OurBuild 4 жыл бұрын

Thanks Mas, glad you found it helpful 👍

@cavnz 2 жыл бұрын

This is brilliant - all the other videos on straightening walls are demonstrated on walls that are accessible from both sides. This video is great because it shows how to do it when only one side of the framing is accessible. Answers a lot of my questions so thanks for taking the time to put this together.

@OurBuild 2 жыл бұрын

Your welcome mate 👍

@falsealarmno Жыл бұрын

@@OurBuild I thought that you was gonna show how to keep the walls in a straight line so you won't have to shave them in the first place.

@glasseyi 8 жыл бұрын

Good seeing you James, always working hard mate! Good tips. Thanks, have a good day. Talk to you.

@OurBuild 8 жыл бұрын

+J Glassey (Glasseyi) Thanks John, I think u have me mistaken for someone else, what is this hard work you speak of :) Take it easy mate, see u on the scopes!

@78wesley 8 жыл бұрын

good job as always mate....all the best...

@randyrey4826 3 жыл бұрын

You make it so simple. This is just what I needed. My home is 105 years old and no walls are straight. I have a planer and a level, so wish me luck.

@palmerr44 Жыл бұрын

Just curious. How did you go planing your walls?

@perf59 8 жыл бұрын

Great advice James, good tips as always, there are always different ways to achieve the same result and your way is excellent, I normally do the short plane strokes first then the last one right across the affected area, that way its all left smooth. keep up the good work buddy, cheers.

@OurBuild 8 жыл бұрын

+perf59 Cheers mate, yeah there is usually a few ways to skin a cat :) Thanks for watching, take care mate!

@alexanderchuyko4889 4 жыл бұрын

That`s perfect! I have exactly the same problem. But the difference is- the wall you have fixed in your video in our situation a common for two bathrooms A couple of new studs are slightly bent. I can fix it like you did from this side, but what do I have to do from the opposite side where we have relatively dents? Thank you

@wheelbuddy2789 Жыл бұрын

thank you for this

@rainwatercold1507 8 жыл бұрын

I would like to try a cordless version first for a day or two first. I'm just like that for some reason?

@ngocluufamily6268 2 жыл бұрын

What kind of saw do you use, we really need this information thank you

@bradn6805 8 жыл бұрын

Oh look its a tool in action lol! You know what you're talking about man, good stuff #tiacrew

@OurBuild 8 жыл бұрын

+Brad N Cheers mate, thanks for watching!

@valm8090 5 жыл бұрын

first thing to do is make absolutely sure there are no nails or screws before you take the planner to those studs :)

@Hew.Jarsol 4 ай бұрын

Nice. Can you lay the boards horizontally if you've got an old fked up lath and plaster Stud wall where all the studs are wonky and bent!? They also have cross braces too. The boards won't fall on the studs when laid vertically? Or should I attach them vertically and cut to size (stud)? Thanks

@tonylandin4845 8 жыл бұрын

Great video James and great tips keep up the good work mate #TIACREW

@OurBuild 8 жыл бұрын

+Tony Landin Thanks Tony!

@asphaltwarriors2183 8 жыл бұрын

This is ProToolNut from the @TIACREW, I wanted to stop by and let you know that I subscribed because I think your channel is awesome. :)

@OurBuild 8 жыл бұрын

+Asphalt Warriors ProToolNut!! How are you mate? Thanks for checking out the video and subscribing. Yeah I go by James10million in the forum if you have not already worked it out. Take care mate.

@asphaltwarriors2183 8 жыл бұрын

I am doing well, and since somebody else helped me to work that out, I do know you are James from the forum lol. I think you have good video's and I'd like to spend more time watching them. Keep being awesome man, and life will reward you. :)

@OurBuild 8 жыл бұрын

+Asphalt Warriors Cheers mate, likewise!

@gasousman 7 жыл бұрын

Thanks for the tips. How do you fix the corners if they're out?

@hpicknell1947 6 жыл бұрын

How do you reposition the bottom framing of an existing wall?

@OllyParryJones 8 жыл бұрын

Great tips, James! What would you do if that same stud was concave and left you with too much of a hollow?

@OurBuild 8 жыл бұрын

+Olly Parry-Jones Thank's Olly, I would normally make a cut halfway up the stud about 3/4 into the depth of it and then pull it out and splice a new piece of timber over the cut. We call the technique crippling a stud.

@wild_away 3 жыл бұрын

Hi James Thanks for the knowledge! Do you generally straighten alll the walls inside? Or just bathroom for tiles.

@OurBuild 3 жыл бұрын

Thanks Yushin Kim, yes all walls on the house would get straightened, especially down long hallways where it is easy to see imperfections.

@rainwatercold1507 8 жыл бұрын

you would still have to plane the fire blocking

@steventanis8732 Жыл бұрын

Hi mate , that's how I do my walls too Question? On door openings I found if I through packers and have square set door jambs for my doors is changing my revels,what you do ?

@OurBuild Жыл бұрын

Hey Steve, sorry I didn't quite understand the question?

@steventanis8732 Жыл бұрын

I make the question simple Do you pack with Packers the jambs studs in doors openings ? If they not straight? I found if I do and is not architraves in the door jambs put square set is change the reveals of the square set

@conellisgreatadventure8864 3 жыл бұрын

G’day James, what size spirit level we’re you using?

@OurBuild 3 жыл бұрын

Hey Jason, sorry for the late reply, it was a 2.1mtr level. You can pick up aluminium straight edges that are also handy for straightening frames as well.

@vzgsxr 6 жыл бұрын

It would have taken half the time and none of the mess to cripple the stud instead. 👍

@rainwatercold1507 8 жыл бұрын

some times you can cut across a stud with a saw. then drive a wedge in the cut. it's hard to explain things on here. lol. I don't know if you can understand my jibber jabber or not.

@OurBuild 8 жыл бұрын

+Zach Miller Hey Zach! Yeah we call it crippling the studs, I made a quick mention of it, but could not demonstrate on this one as the plaster was on the other side of the wall. How's business in the States, plenty on?

@rainwatercold1507 8 жыл бұрын

+Our Build business is real good here. looks like it's going good there as well. yea you don't want to do that with sheetrock on the other side. must have missed that. I love my Makita planner. it's a life saver.

@OurBuild 8 жыл бұрын

Yeah the old faithful has earned its keep, time for a cordless model next I think.

@THEMMASOYRU 4 жыл бұрын

damn where's the ear protection?

@OurBuild 4 жыл бұрын

Good question 🤔😁

@simonpathomas4421 3 жыл бұрын

Should have sorted out the studs before you nogged it and batted The Wall that's how it's done in Aotearoa New Zealand mate kiaora 🔨🤪🇳🇿

@Kobe29261 3 жыл бұрын

Not a dig at your vide but its atrocious the size I see for bathrooms in modern homes; we seem to forget that when you put a house-footprint down thats crippled soil; especially slab on grade. Wish we were more considerate of land resources.