WALL MOUNTED CUSTOM (BUDGET) PRESSURE WASHER SETUP FOR A CAR DETAILING

Рет қаралды 16,757

10 ай бұрын

WALL MOUNTED CUSTOM (ON BUDGET) PRESSURE WASHER SETUP FOR A CAR DETAILING
Links:
Pressure Washer: amzn.to/3sjouei
MTM Hose: amzn.to/3qxMry6
MTM Gun: amzn.to/3OCofTk
Jumper Hose: amzn.to/3sgjA21
Stainless Steel Shelf: amzn.to/47Bkp5t
Coxel Reel: amzn.to/3DX8gKq
DI Filter car wash: amzn.to/3OBYouz
Sharbite Valves: amzn.to/3KL6qjL
Sharbite Ts: amzn.to/3E2kUYR
Sharbite Connection: amzn.to/3qvS9AH
Water heater Hose: amzn.to/44fb3t8
Nozel: amzn.to/44iuHEB
#pressurewashing #custompressurewasher #garage

Пікірлер: 52

@Matty.Garage 10 ай бұрын

Let me know what you guys think! Also, all the links are in the description below! 👍🏻

@26-CJ 2 ай бұрын

Hello. Thanks for sharing your install. Question. Do you have a link for the spigot. I assume it’s a quarter turn valve. What length is your stainless steel bucket filler hose and your stainless steel hose that connects to your pressure washer.

@Zionfarm 2 ай бұрын

Loved your setup and the use Lowe’s parts. Major price decrease by sourcing your own parts.

@adipierwszy1730 13 күн бұрын

Piękna koszulka. Biało Czerwoni do Boju🇵🇱🇵🇱🇵🇱🇵🇱💪

@redsoxz1259 10 ай бұрын

Man that is a clean well thought out setup. I will have to save this video for when I do mine for inspiration 👍

@Matty.Garage 10 ай бұрын

Go for it! Thank you for the support!

@tiagoricardotolentino 10 ай бұрын

Great job dude!!!! 🔥

@Matty.Garage 10 ай бұрын

Thanks 🔥

@garymay3072 10 ай бұрын

I LIKE THE RED ONE!!!! LOL/ Great Vid as always Bro!

@PLLuxuryReviews 4 ай бұрын

Great video

@CUTS67 9 ай бұрын

Great job man thanks for video

@Matty.Garage Ай бұрын

Thank tou

@santirockford4530 10 ай бұрын

Great job amigo! Good layout.

@Matty.Garage 10 ай бұрын

Glad you like it!

@chadgardnerdds3197 6 ай бұрын

Looks nice. A suggestion would be to use buffer tanks of pre-filtered water to feed your DI system so it will last longer if you have room. I got a couple smaller IBC totes from Facebook marketplace for $150. Clean them REALLY well with multiple cleaners and finally IPA. Bought 6 cheap ceramic filters from Amazon. The regular water goes into the first 50 gallon tank with a float valve shut off to keep it full. The water gravity filters very slowly through the ceramic filters into a 350 gallon holding tank when I’m not washing anything. Whan it’s full, another float valve shuts off all water coming into the system. The 350 gallon tank has a 9 GPM pump pushing the water through the DI filters, into pressure washer, etc. Also used 3/4” PEX. TDS after the ceramic filters dropped from 300-400ppm to about 40-80ppm. My current DI filters are now giving me 0ppm water after 14 months and hundreds of washes. Plus I’m washing with near-DI water which seems to help a little. It takes a good bit of space and a battery to power the 9 GPM pump, but it cost $400 max to build. I want to add a tankless water heater but don’t have room in my breaker box for the big breaker

@isaacrobles846 27 күн бұрын

Nice man, super informative. Thanks for sharing!

@dannytaino9116 10 ай бұрын

Nice job Matt 👏

@Matty.Garage 10 ай бұрын

Thank you sir!

@davidbram 10 ай бұрын

Clean!

@Matty.Garage 10 ай бұрын

Thanks!

@MRUISBIG 10 ай бұрын

You should be proud of yourself, considering what others be selling their systems, for which is outrageous. Especially in these times.

@Matty.Garage 10 ай бұрын

Thank you so much for the nice comment! I really appreciate it

@Legendary_UA 14 күн бұрын

Nice job

@ProtectiveDadPranks 10 ай бұрын

Pure ENVY ❤

@Matty.Garage 10 ай бұрын

Let’s do it in your garage!! ☺️

@VADER_C5 10 ай бұрын

I might have to come and test it out!

@Matty.Garage 10 ай бұрын

Appointments available

@stephen6157 10 ай бұрын

Nice job🔥🔥

@Matty.Garage 10 ай бұрын

Thanks 🔥

@ant1374 10 ай бұрын

First of all, love the jersey bro, my wife is Polish. Very clean install, love it 👍

@Matty.Garage 10 ай бұрын

Thank you sir! I did live in Poland for 7 months!

@davidbundesen5867 Ай бұрын

Well done. Very clean installation. Kudos.

@Matty.Garage Ай бұрын

Thank you so much!!

@randyk2904 2 ай бұрын

Excellent job and video work too . Thanks

@Matty.Garage Ай бұрын

Thank you so much

@gjoniny1534 Ай бұрын

I have a similar setup up but use spotFree canisters, but now im thinking placing some filters to lower tds into spotfree because my tds is high and makes the spotfree work harder and have to replace resin more often

@Matty.Garage Ай бұрын

I agree… you should do that

@blck04gt Ай бұрын

Awesome video! What 3/4" NPT elbow did you use coming off the in and out of the 2 stage canisters?

@NO_OPEC_NO_PROBLEM Ай бұрын

SUPER! Going to plagiarize your setup. I’m having hot water in the garage.

@Matty.Garage Ай бұрын

Go for it!!

@asymptomatic84 10 ай бұрын

nice. what bolts did you use to mount to the wall. i had my contractor set up mine but it wasn't as clean as yours

@93V 7 ай бұрын

have you measured the gpm flowrate through the filter? on the description, it says it has a 0.75gpm restrictor and i understand that you want 1.5-2.0gpm for foam cannons. obviously it looks like it's working well from your video. also, any idea how many washes you will get out of the filters before you change the resin? your tester said 430, their product page says it will remove 1800-2000. TIA

@jose9899 7 ай бұрын

what piping did you use ????

@kencanada4492 6 ай бұрын

Running 1/2 inch pex, do you notice any water starvation to the active 2.0 ? I was going to run 3/4, but a lot better selection of shutoff values in 1/2 inch