Walnut & Cherry Jewelry Box

Рет қаралды 20,522

3 жыл бұрын

I made this modern-style jewelry box from walnut, cherry and cocobolo for the pulls. I think I spent more time on this project than any other featured on this channel. It was a fun build and I learned a few new techniques as I built this. I also made a video of how I made the jig used to cut the dovetail splines. The video is here: • Dovetail Splines (With... .

Пікірлер: 46

@DamianDArienzo Ай бұрын

Very nice.

@heriberthuber54 Ай бұрын

I do not undertand why you don't have more subscribers. The content is educational, well filmed and edited + your voice is pleasant. That should be a winning formula.

@catspawcustoms Ай бұрын

@@heriberthuber54 thanks, I’d certainly like more as well, but I’ll take what I can get

@heriberthuber54 Ай бұрын

@@catspawcustoms channels like yours just prove that YT does not care about quality of content. Fingers crossed that at some point the algorithm just clicks and you get recommended more. Can't believe I only found you yesterday. I'm watching so much woodworking content, you really should have shown up sooner. Good luck!

@catspawcustoms Ай бұрын

@@heriberthuber54 well, you know what they say. “Like, share, subscribe”

@heriberthuber54 Ай бұрын

@@catspawcustoms Already did :-)

@user-bo6ke2vy4k Ай бұрын

Un excelente trabajo y una idea genial para realizarla, gracias x el aporte

@parkercombes 8 ай бұрын

Apparently this is 2 years old, but it’s the first time you came across my feed. Great work!

@catspawcustoms 8 ай бұрын

Thank you!

@tree_carcass_mangler 3 жыл бұрын

Excellent! Walnut does that to me all the time. Thumbs up and thanks for posting.

@catspawcustoms 3 жыл бұрын

Thank you!

@mikeamboy7292 6 ай бұрын

Very nicely done!!

@mauriceryton Жыл бұрын

Nice build great job.

@funkypunkypine 5 ай бұрын

Gorgeous!

@mbrombert 3 жыл бұрын

Stunning work.

@MCsCreations 3 жыл бұрын

Amazing work, dude! What a fantastic box! 😮 Really nicely done!!! Stay safe there with your family! 🖖😊

@catspawcustoms 3 жыл бұрын

Thank you!

@biancaw.5987 3 жыл бұрын

Gorgeous, as always, Patrick! Two thumbs up!

@catspawcustoms 3 жыл бұрын

Thank you!

@caricopocapote 3 жыл бұрын

EXELENT JOB

@jimfeight1114 3 жыл бұрын

Gorgeous box and great video

@catspawcustoms 3 жыл бұрын

Thank you!

@yourpalborno 3 жыл бұрын

Stunning.

@catspawcustoms 3 жыл бұрын

Thank you!

@yourpalborno 3 жыл бұрын

@@catspawcustoms Seems like with every one of your projects you go the extra mile after most people would call a project done. I really appreciate this and it pushes me to think more about what “done” really looks like.

@catspawcustoms 3 жыл бұрын

It’s so easy to get close to the end and skip out on the details. It’s taken me a long time to get in the habit of taking the time to do it right.

@anch1994 Жыл бұрын

This is about the max size of the project that I could do in my shop. Woud you be willing to discuss how you priced the jewelry box? Feel free to DM me if you don't wish to discuss this publicly, thanks in advance!

@catspawcustoms Жыл бұрын

I don’t mind. If I remember, I charged $900.

@greatodinsraven 7 ай бұрын

Is the makers mark typically placed in the inside of the box like that?

@charlespitz8986 3 жыл бұрын

Nice work and fun to watch your record of the process. I was wondering, where did you have your maker's mark (engraved brass?) plate made?

@catspawcustoms 3 жыл бұрын

I made those myself. Search “acid etch brass” and there are tons of videos on how to do it. I use vinyl to mask and ferric chloride to etch.

@michaelcarney8530 3 жыл бұрын

That's fantastic. The divider trick looks great, but yeah i won't be doing that on my table saw any time soon! I just got the same Wahuda jointer - any tips to make it sing? I've set it up to within .0025" across the surface but still find a bit of inconsistency when using it.

@catspawcustoms 3 жыл бұрын

I found that the consistency is in the technique and it is really only reliably good to maybe 36” long pieces. If you go fast the surface finish isn’t good, but slow makes for a nice smooth cut.

@michaelcarney8530 3 жыл бұрын

@@catspawcustoms thanks!

@robslifting4life 3 жыл бұрын

1:05 I know that pain too well...

@ts7113 Жыл бұрын

Great work! I'm looking at making two of these for my twin daughters. What were the overall dimensions?

@catspawcustoms Жыл бұрын

If I remember correctly, it was something like 20” wide, and 10” high, maybe 9” deep. But this was a sale so I don’t have it anymore to be sure.

@beurre4117 2 жыл бұрын

Do you plane your home wood

@catspawcustoms 2 жыл бұрын

Yes

@thewoodshop69 8 ай бұрын

What is home wood?

@mauriceryton Жыл бұрын

Where is your riving knife?

@catspawcustoms Жыл бұрын

Installed on the saw

@mauriceryton Жыл бұрын

There was a lot of stress in that wood. I missed the riving knife, my apology. You are lucky to have avoided a very dangerous kickback. Good job. I have had kick back twice in my decades as a woodworker, it is not pretty at all.