Walther PDP Spring Selection for ZR Tactical Stainless Guide Rod

Рет қаралды 16,264

Жыл бұрын

Quick explanation about which spring to use when upgrading your PDP or PPQ with our aftermarket stainless guide rod.
Springs depend on the configuration of the firearm and what type of ammo you're using.
Checkout our products here:
zrtacticalsolutions.com/shop/...

Пікірлер: 88

@willieb5911 10 ай бұрын

Thanks for explaining the PDP-F series spring weight. I just ordered one and then wondered if I should have selected a 15 lb spring instead of the 17 lb one I ordered. I then looked up this video and felt better knowing 17 lb is best for that model. You guys do a great job explaining in detail stuff like this about your products. It helps is because you answer the questions gun guys would ask

@OBZ74 7 ай бұрын

Got the 15LBS guide rod from ZR tactical and I couldn’t be more happier with it! Huge difference between their SS and the OEM plastic guide rod!❤

@Shadow__133 4 ай бұрын

I got the 17 and didn't notice any difference, aside from some spring squeak now, including Mantis data analysis. Maybe they'll exchange for a 15?

@JawnThicc 5 ай бұрын

I was running the 15lb captured rod in my PDP Pro and it was flawless for 2000+ rounds. I am currently running the brass guide rod with 13lb spring and it has also been flawless with over 1000 rounds of 147 grain at a 138 power factor. I would highly recommend these products.

@FirearmsNFishing 4 ай бұрын

Just ordered the brass rod and 13 and 15lb springs, are you still running with no issues on your 13lb?

@jasonfox1532 Жыл бұрын

I ordered mine with the 13lb spring for my PDP Pro compact but when I installed it the slide would slide out of battery with very little pressure so I took the factory spring off the pos factory guide rod put it on the steel one and it's running like a champ

@robertkwiatkoski1292 Ай бұрын

Why not the 17lb in the 4" f series? Would love to help my girl reduce some "flip" in our pdp-f 4" I'm confused but paying attention. Thank you!

@OBZ74 11 ай бұрын

Which spring would you recommend for PDP 4” compact PRO SD with the threaded barrel? 13 or 15? I am using 124 grain only…

@byronbranch4645 10 ай бұрын

@jdouguspsa 4 ай бұрын

love the 15lb been running it for competition and only today with new federal 147 gr flat nose, did i run into issues. i think the overall length and the flat nose top was just a little too much for the 15lb to slam back into battery. 18lb stock spring fed em fine. im waiting to get a 17lb spring in to see if it will do the trick and give me a better feel. does that 1lb difference compare similar to the 15lb?

@graylonperson9012 Ай бұрын

good question.. I ordered the 17 lb spring just to take all the ammo

@michaelheinecke2937 7 ай бұрын

Wanting a captured ss guide rod for a pro sd compact. Shooting mainly 115 grain range and 124 grain nato, but will also shoot 100-200 critical duty 135 grain +p a year. What would be your recommendation?

@graylonperson9012 Ай бұрын

great question... I went with the 17 lb guide rod

@dodgefreak8797 Жыл бұрын

Does spring rate affect reliability when running suppressed? Do you have a recommendation on what spring rate should be used to do so? Thanks

@zrtacticalsolutions Жыл бұрын

Needs to be a 15 or 17lb for suppressed use

@dodgefreak8797 Жыл бұрын

@@zrtacticalsolutions on thank you!

@Robespierres_Ghost 7 ай бұрын

Walther cheaped out with the plastic spring spacer on the 4.5 and 5 inch pdp. Can you guys make a steel spacer?

@zrtacticalsolutions 7 ай бұрын

No the extra weight would be bad

@compositetiger 2 ай бұрын

What do you recommend for the Walther PDP Pro 5.1 inch? This is for suppressed shooting of subsonic loads.

@zrtacticalsolutions 2 ай бұрын

@jimmyavery867 3 ай бұрын

How much is the 15lb spring for pdp 4inch compact

@mmafanatic-tz5or Жыл бұрын

What would you recommend for 124 grain fmj and hollow point? Maybe 124 +p? No comp. Would 15lbs spring work?

@zrtacticalsolutions Жыл бұрын

+p? 17. 15 absolute minimum. 17 is likely safer

@mmafanatic-tz5or Жыл бұрын

@@zrtacticalsolutions the 17 lb spring is not going to make a difference in recoil correct? Well that sucks. I just ordered the 15 lb and it says it's been shipped.

@Shadow__133 4 ай бұрын

@@mmafanatic-tz5or17 did not make any difference for me. Go with the 15 Id say.

@michaelhope3875 13 күн бұрын

I have the pdp pro 5.1 full size.. I plan on shooting 147gr and 124gr. Would you recommend I keep the factory to handle all that pressure? I also do have a comp installed, thanks brother.

@zrtacticalsolutions 10 күн бұрын

147 is low pressure. 17 to be safe but most people run 15

@DadofThunder 11 ай бұрын

The Polymer guide rod on my 3.5” F-Series is starting to chip away. How does the ZR 17Ib recoil spring compare to the OEM spring when it comes to racking the slide back? Does it make it heavier?

@zrtacticalsolutions 11 ай бұрын

It's lighter than the factory poundage.

@DadofThunder 11 ай бұрын

Thanks, I’m not looking to make it lighter, or Gucci. Just looking for a replacement that feels the same as the Walther recoil spring. Will order one. Hopefully the USPS doesn’t lose it.

@DryLipJohn 11 ай бұрын

Sounds look you should just order Walthers tungsten spring if you’re not looking to go lighter.

@2aisabsoluteTim 9 ай бұрын

@@zrtacticalsolutions?? I got an email back from your customer service dept. I asked what lb should I put in the PDP F and was told 17lb You stated the 15lb Also most of my self defense ammo is 124 and 147 grain plus P will this be an issue. Of course I'll be training with the gun at the range. So what's your suggestion for the PDP F which I'll be shooting 124 to 147 +p and then range ammo is 115 124 147 not +p

@zrtacticalsolutions 9 ай бұрын

@@DryLipJohn if you’re shoring +P then go 17.

@nickf2170 2 ай бұрын

I have a PPQ paddle version mag release, in .40 cal. It stove pipes and fails to feed, way too much. I usually shoot hotter underwood ammo. Before I contact Walther, would a different spring make any improvement with this issue? Thanks.

@zrtacticalsolutions Ай бұрын

We haven't developed any information on spring rates for the 40. The OEM spring is 18.6 for the 9mm so It may be the green, 22lb spring for the 40

@nickf2170 Ай бұрын

@@zrtacticalsolutions Thank you for the info and the reply.

@MonstaFreak13 7 ай бұрын

So my question is, wouldnt a heavier spring slow down the slide reducing the recoil? Ive always been a little confused about that.

@zrtacticalsolutions 7 ай бұрын

It creates a larger impulse with the higher static load. It then returns to battery really hard causing a second impulse.

@MonstaFreak13 7 ай бұрын

@@zrtacticalsolutions thank you. I kinda had an idea about that, i just didnt know if it would still return as hard since it moved slower in the first place

@graylonperson9012 Ай бұрын

does the 17 soften some of the recoil? or is it just to replace the plastic guide rod from the factory?

@zrtacticalsolutions Ай бұрын

It will. It's closer to the OEM spec but allows complete reliability suppressed and with +P ammo

@Chief1911 Жыл бұрын

What spring do you recommend for a FS Pro with a PMM comp using 124gr NATO and 124gr +P only? 15/17?

@zrtacticalsolutions Жыл бұрын

Stick with the factory assembly if you're shooting +P all the time.

@Chief1911 Жыл бұрын

@@zrtacticalsolutions thank you for the reply. The same is correct for the Compact PDP pro, right?

@zrtacticalsolutions Жыл бұрын

@@Chief1911 yes. If you’re shooting +P, defer to mfg specs

@Chief1911 Жыл бұрын

@@zrtacticalsolutions Thank you, does the compensator call for your 15 pound spring if I start to shoot standard loadings?

@xm3ntal620 6 ай бұрын

What would you recommend for one with PMM Compensator?

@zrtacticalsolutions 6 ай бұрын

Not sure about their comp. Either 13 or 15. Depends on how efficient it is. Ours works best with 13

@larrybruns5051 3 ай бұрын

Well, when my guide rod breaks, I’ll try one of those theirs.

@davewhaley6917 Жыл бұрын

He just ran through some information without really answering any questions. Why should we replace the factory spring with this company’s springs? If we shoot all bullet weights and pressures, which is the one to use? Captured vs non captured and does it really matter?

@zrtacticalsolutions Жыл бұрын

Maybe you missed it. The captured and uncaptured do the same thing. One is just easier to change spring rates. If you’re not looking for any change in function or tune the gun, leave the factory parts in.

@czgunner 10 ай бұрын

Do you guys offer a military discount?

@zrtacticalsolutions 10 ай бұрын

Yes

@WithTheBears 5 ай бұрын

What is that optic???

@zr2overlander323 Жыл бұрын

What is your recommend on guide rod spring when running a comp on a pdp pro sd compact? 15#? Thanks and take care

@zrtacticalsolutions Жыл бұрын

All bets are off. Hard to say. Depends on comp brand, ammo, etc. you will have to tune in based on that. No canned solution with comps

@boomee78 Жыл бұрын

What you you suggest for actuall concealed carry 124 or 147 federal hst. Compact 5 inch and full size 4.5 inch

@zrtacticalsolutions Жыл бұрын

@@boomee78 15

@royhooker1561 Жыл бұрын

When I run a wolf guide rod and wolf, 15 pound spring, it doesn’t wanna stay in battery when pointing it directly in the air like the slide doesn’t go back in the battery do I have to change or need to change the striker spring as well to help it get back in battery how do I fix this?

@royhooker1561 Жыл бұрын

Guess what I’m saying is when I point the gun directly in the air at 12 o’clock and racket the slide doesn’t wanna go back into battery hundred percent it’s like 956% back in battery

@RonnieEverette 2 ай бұрын

Its so crazy how much ive been researching this the last 2 weeks and getting completely conflicting information.. So if i go from an 18 pound recoil spring weight to a 16 pound that will decrease recoil? Because i was told u go up in weight to reduce recoil.. im having a hard time understanding.. I really want to find a way to reduce recoil so my wife will feel more comfortable shooting at the range with me.. She said my PDP kicks too hard for her and she wants a different gun.. Well if i can reduce recoil by changing the recoil spring, then id be willing to make that change.. Only problem is im getting conflicting information.. Can anyone help?

@zrtacticalsolutions 2 ай бұрын

Listen to the videos we have explaining it. It has to be matched to your ammo. 15lb is best for most people but it won’t overcome improper grip. 18lb is over what’s needed for standard power 9mm. Increasing will only increase the impulse. It’s a mass damper system.

@RonnieEverette 2 ай бұрын

@@zrtacticalsolutions I mostly use 115 grain blazer.. at this moment I really don't own anything else.. Thanks for your feedback.. im going to try a 15 LB and see if that helps

@zrtacticalsolutions 2 ай бұрын

@buhtcheeks Жыл бұрын

11lb, gen 4 glock 17 stainless spring...no issues

@conceptchannel1112 6 ай бұрын

Go away, fanboy.................................... We are talking about guns, of this Century......

@buhtcheeks 6 ай бұрын

@@conceptchannel1112 whaaaattt, fan boy, how creative. Everybody's an expert, I've been deal'n with guns since the 70's and always learn new shit daily, did I mistakenly make a false statement about a gun I own and operate pretty much daily. Ohhh, you think every polymer handgun is unique and parts aren't interchangeable. No wonder why they want to take people's guns away 🙄...

@mc4056 Жыл бұрын

What about 147gr 9mm supressed.

@zrtacticalsolutions Жыл бұрын

15 or 17

@TheAxe4Ever Жыл бұрын

He’s trying to sell his guide rods and springs. I get it. Go capitalism! But I love how he threw the factory guide rod and spring over his shoulder like it’s garbage. I’ve had my PDP now for going on two years and just passed 5500 rounds and the thing still runs like a champ with the factory Spring and guide rod. So, there’s that. People complaining about “muzzle flip“ from a 9 mm pistol should learn to work on their grip before they worry about a new spring. Fundamentals first.

@somethingtactical Жыл бұрын

Try a 13lb or 11lb spring and go back to your statement. Pistols are oversprung to handle all variety of ammo. Once you learn to dial it in you see what the conversation is about. He is selling them because it works. No not necessary but shots on targets will amaze you with less effort

@liamroxas5386 Жыл бұрын

I’m here because my factory polymer guide rod already cracked after 2 range trips. I put 200ish rounds through it and noticed the crack when I was cleaning the gun.

@derfnyc1 Жыл бұрын

I agree 100 percent. I learned with my first pistol s&w SD 9 I changed guide rod and trigger, sights. And still couldn't hit crap 2 feet away. I listened to all these people and wasted money when all I had to do is train with what I had. All my guns a factory except for sights I like night sights.

@jackg.2780 11 ай бұрын

I have their 15 lbs captured guide rod, works perfectly. To me it shoots even better staying on target. Plastic is used by the manufacturer to lighten the weight of the pistol. Definitely not for long term.

@2swole4u74 10 ай бұрын

Fun fact I can shoot my cheapest gun just like my most expensive one. 🙃 Its all in the grip one mod you can't buy " shooter mod " ..