Construction of a Gas Fired Soda Kiln Part 2

  Рет қаралды 3,487

Washington Street Studios

Washington Street Studios

3 жыл бұрын

Welcome to The Potter’s Round Table slideshow of the construction of a gas-fired soda Kiln at Washington Street Studios. The slideshow will walk through the design, features, and construction step-by-step with photos and explanations. In part one of the three-part series and we covered the kiln design, kiln base and building the walls. This episode, part two will cover raising the chimney, completing the end walls, planning the arch, constructing the arch form and completing the chimney. Part three will add the metal framework, build the arch, completing the side walls, adding burners and propane supply, door construction and final kiln dimensions.
We have created an eBook as a companion to this episode with all the pictures referred to in the show along with full notes. The eBook is available at the following link: www.hfclay.com/product-page/c...
The Potters’ Round Table is a production of Washington Street Studios. As a result of the pandemic the Round Table is hosted as a KZfaq livestream event and then edited to be added to our video library.
Show notes, including handouts, can be found at www.hfclay.com/the-potters-ro...
The Potters’ Round Table is brought to you by Washington Street Studios, a community pottery studio, gallery, and pottery school located in Harpers Ferry / Bolivar, WV. We exist to provide ceramic artists an affordable, fully equipped studio space for aspiring, emerging and established artists to share their creative energy and knowledge in an environment designed to support the ceramic artist. If you want to learn more about Washington Street Studios, visit our website at www.hfclay.com/.
At Washington Street Studios, we believe the sharing of creative energy and knowledge will improve the quality of our art and increase the appreciation of art within our community. We are striving to create an environment where the arts are shared and appreciated. We want to grow as a family of artists and contribute to our community.
KZfaq
This video is one of our steps to share our passion for the ceramic arts, creative energy and knowledge with other artists and art lovers. We also created an audio version to expand our audience. If you are looking for the podcast of our show search for the ‘The Potters Round Table’ on your podcast platform of choice or go to anchor.fm/thepottersroundtable.

Пікірлер: 10
@jeangarry3285
@jeangarry3285 2 жыл бұрын
I am in awe of the expertise that has gone into building this kiln. The step by step documentation has given me confidence to build my own downdraft propane fired cone 10 kiln. Would the design of this kiln (without the soda ports and shelves to catch the "soda slop") work for cone 10 firings? Thank you so very much for all the videos. I love watching and learning from them.
@WashingtonStreetStudios
@WashingtonStreetStudios 2 жыл бұрын
Yes, the design would work, and you could use insulating brick for the inside layer of the walls to provide more insulation. We used hard brick because the soda would dissolve soft brick. Without soda, soft (or insulating) brick would give you a lot more efficiency and keep the heat in better.
@nathanmiller7109
@nathanmiller7109 3 жыл бұрын
Thanks for doing your video
@WashingtonStreetStudios
@WashingtonStreetStudios 3 жыл бұрын
You are welcome Nathan, share the channel with your friends and fellow potters!
@Allinone-yl6mw
@Allinone-yl6mw 2 жыл бұрын
Mashallah 🥰
@WashingtonStreetStudios
@WashingtonStreetStudios 2 жыл бұрын
Jazak Allahu Khayran
@AnLe-yg9ln
@AnLe-yg9ln 3 жыл бұрын
Thanks you very much!
@WashingtonStreetStudios
@WashingtonStreetStudios 3 жыл бұрын
You are most welcome, we are happy that you are finding the videos useful! Please share the channel with your friends and fellow potters!
@ShopperPlug
@ShopperPlug 3 жыл бұрын
Why isn't proper refractory mortar is being applied? To make high efficient high temperature brick pizza oven, refractory mortar is used. By building code state law requires to have high temperature ovens of all sorts to be 10 feet away from a building or a home... it's crazy how the kiln is so close to that building and door, thats a fire hazard and it does not matter how much of a pro you are.
@WashingtonStreetStudios
@WashingtonStreetStudios 2 жыл бұрын
Using mortar is a decision. The kiln could be made more efficient with refractory mortar, if you are willing to accept the risk that the mortar will degrade and may fall into your ware-stack. We elected not to have the risk of mortar degradation in our kiln build. As for the chimney being close to the building, the chimney is double walled, and while firing it can be hot to the touch, the radiant heat does not reach to the building even at the final temperature. Thanks for watching and commenting!
Construction of a Gas Fired Soda Kiln Part 3
27:12
Washington Street Studios
Рет қаралды 2,8 М.
Kigbeare Kiln Project
7:05
Ben Boswell
Рет қаралды 31 М.
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 14 МЛН
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 6 МЛН
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 29 МЛН
WHO LAUGHS LAST LAUGHS BEST 😎 #comedy
00:18
HaHaWhat
Рет қаралды 22 МЛН
Construction of a Gas Fired Soda Kiln Part 1
31:13
Washington Street Studios
Рет қаралды 9 М.
Душевой поддон из плитки.Установка душевого трапика.
44:14
Tips for Making Professional Looking Pottery
24:54
Washington Street Studios
Рет қаралды 9 М.
Firing the Soda Kiln at Washington Street Studios
26:25
Washington Street Studios
Рет қаралды 4,6 М.
PRT Functional Teapot Design
22:34
Washington Street Studios
Рет қаралды 3,1 М.
Understanding Pottery Chapter 14 Gas Fired Kilns Part 2
31:16
Washington Street Studios
Рет қаралды 6 М.
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 14 МЛН