Watch Before Buying ANDIS T OUTLINER ! #11

Рет қаралды 8,191

12 жыл бұрын

Once the Best in the Trimmer Market, the Andis outliner went from GREAT to Trash almost over night. The quality now sucks watch before buying an andis t outliner. Nothing about the Andis outliner is the same.
Thank you to each and every subscriber -- Delace1111
Enjoy, Please LIKE, COMMENT and SUBSCRIBE.
*YOU BE THE JUDGE, DID ANDIS SACRIFICE QUALITY FOR HIGHER PROFITS?
In-depth look at the quality of the Andis T Outliner & Outliner II.
I compare 3 T Outliners from Housing thickness & switch designs.
I also confirm that blade quality has deteriorated.
Blade thickness has also gone down by up .007".
Blade once finished with polished edges, now stamped and debarred
Parts that were previously made of brass now are made out of cold rolled steel.
Competitors: Wahl detailer trimmer, wahl detailer, Andis T-outliner cordeless, Babylisspro fx trimmer, babyliss pro fx, babyliss pro trimmer, barber trimmer,

Пікірлер: 48

@ptonfire1 4 жыл бұрын

Wooooww .....nice bro... Thats why I dont pay more than $20 for used Andis never new. Brrn using since 1994 bro.

@ClevertymeZ 9 жыл бұрын

In my opinion, this video is the reason why Andis redesigned their T-outliner/Outliner II housing. More on the older style when Electro Tools was manufacturing them. Thanks Delace III!

@shield400 10 жыл бұрын

My t-outliners may not be built flawless but they perform flawless. At the end of the day that's all that matters to me.

@mikecanont1 11 жыл бұрын

im glad i never throw out my old clippers i just repair them one way or the other i will take 4 old clippers and make one before i buy a new one.

@Ronsclassicphotography 12 жыл бұрын

u just proved what i been saying for yrs but the funny thing is andis deny all of these claims like were crazy LOl.....i started cutting in 1982 and used andis trimmers exclusively and around 2002-03 i started getting pissed with the blades with the exception of the styliner 2.....i mainly have been using the detailers and even the hero but the noise of the hero is really annoying longterm..until the gtx came out with the new deep theeth blade and they won my respect back with that..great vid

@cclemoyne4033 4 жыл бұрын

Old school rules! Today's products are engineered to fail. Thank you for the heads up.

@richy707 12 жыл бұрын

Wahl and Andis need to watch this..those rough parts on the blades make them rust quickly already happened to my t-wide blade and I keep it clean

@barberjfademaster2311 12 жыл бұрын

I switched to wahl I used andis T's and the square boys for like 2 yrs till' i picked up wahl razor edgers. Andis liners get hot! u need like 2 or 3 if your busy or use on certain cuts. like one liner for just bald fades or just designs beards and line-ups. pro-mate blades on your andis outliners improves a lot. Don't b afraid of straight razors! real pros can do a whole line-up without liners.

@nigelravelo27 12 жыл бұрын

Good knowledge Bro!

@DelaceLeCoiffeur 12 жыл бұрын

Thanks Mang, Appreciated!

@DelaceLeCoiffeur 11 жыл бұрын

Thanks for the respect, its a hobby I enjoy. I still have a lot to learn.

@Numbuh07 6 жыл бұрын

I like the outliners any way. Especially the 2010 version. I wanted a 2000 version, but I got a 2010 version for Christmas.

@Numbuh07 7 жыл бұрын

Outliners are awesome! Including the masters!

@SIX8Camaro 11 жыл бұрын

And I do respect your love for barbering! Peace!

@DelaceLeCoiffeur 12 жыл бұрын

It was you Ron Legend AKA RonsClassicKuts and Alex Campbell AKA defuniaksprings8 that got me to thinking and inspired me to take a closer look at my outliners and create this video.

@SIX8Camaro 11 жыл бұрын

Know this those products are factory seconds and are meant for sale in Third World countries! The distributor buys them up from Andis, Wahl, n Oster then sells them to companies who are suppose to sell them over seas, but ends up sellng them here to every mom n pop shop , every Tom Dick n Harry who ends up on eBay n Amazon(3rd party contracts) then sell them to you the unassuming consumer. Thinking your getting a DEAL!

@ClevertymeZ 11 жыл бұрын

Mann, thanks for this video. How old are the original Outliner? It should have the date stamped on one of the plug prones.

@DelaceLeCoiffeur 12 жыл бұрын

Andis needs to for sure! Wahls been doing things right.

@nakiagriffin5855 6 жыл бұрын

I've been saying for a few years that they don't make clippers as good as they use to. I've gotten so much slower because the clippers I use do not cut like they are suppose to. I'm a 16 licensed veteran with 9 years of bootleg experience. I know I'm good at what I do but hard to expand my talent if the equipment is not 100%. Where can I get the quality I use to get? I never have kept the same pair of clippers for over 2 years. Help would greatly be appreciated. I use oster 76ers, oster fast feed, andis master , and andis outliner. I've used all brands during my experiences

@jpeps89 12 жыл бұрын

damn dats krazy my andis styliner 2 blade one side is thiker then the other side and same goes for my new andis masters the blade is uneven by uneven i mean the thickness

@LapreeThaBarber 12 жыл бұрын

yes i respect that i have 4 machines that i use but i have always thought andis were the best but i find myself purchasing several blades which run me about 30 buck...i was just wondering what you recommended

@DelaceLeCoiffeur 11 жыл бұрын

So true!

@DelaceLeCoiffeur 12 жыл бұрын

I can agree in this case.

@LapreeThaBarber 12 жыл бұрын

so what outliners do you recommend

@JonVarbero 10 жыл бұрын

not just Andis, oster is doing it too. I have a 90s oster fast feed and a 2000 fast feed and there are differences between the both as well...smh

@DelaceLeCoiffeur 12 жыл бұрын

If you're going to buy an Andis T/ Outliner in store, you should take a good look at it before handing over your $. I'm happy with my Wahl Detailers.

@SuperAntman216 11 жыл бұрын

Wooooow! At a loss for words... No wonder why many barbers are switching to Wahl.

@ricangem28 11 жыл бұрын

Damn, I am slowly going to Wahl too.. very disappointed with my magnetic guards as will, the concept was beautiful until the magnets started popping off and sticking to my masters. Step up your game to match your prices Andis!

@fatsbigo 9 жыл бұрын

The well built Outliner II isn't made by Andis, it's made by Electro Tools Corp. They made them until Andis bought the patents from them.

@AnarexicHippo 11 жыл бұрын

lol. Wahl heros is the way to go!

@SIX8Camaro 11 жыл бұрын

Not for nothing n no disrespect but 1. Make Sure you buy from an authorized retailer of Andis, Oster, and Wahl! When you find thin bodies n unfamiliar markings on the clipper they are usually KNOCKOFFS!(FAKE) When you purchase from the web, you know the sites I'm talking about you can end up with anything. If it is extremely cheap ask yourself. WHY? If your saving 4-5 bucks but you can't be assured that the product is sold by an authorized retailer:

@DelaceLeCoiffeur 12 жыл бұрын

Yes, the cutting blade will be thinner then the comb blade.

@DelaceLeCoiffeur 12 жыл бұрын

Outliners are amazing but I just think the quality is down. I use about five machines to do all my cuts. 1 outliner, 1 styliner, 1 master, 1 senior and 1 detailer. A True Professional uses what they have.

@DelaceLeCoiffeur 12 жыл бұрын

Put the sheers to it!

@cmoneytheman 4 жыл бұрын

they look all the same here really I just found out of this brand 2 years ago when I got my first one I got the styliner but this vid is wrong liners is not trash it depends on the blade and talent

@DelaceLeCoiffeur 4 жыл бұрын

I respect that!

@cmoneytheman 4 жыл бұрын

@@DelaceLeCoiffeur is it a stone I can use to sharpen these I got styliner but it's not much difference I know

@DelaceLeCoiffeur 12 жыл бұрын

Naw just a few High "Pro"-file Locals.

@jpeps89 12 жыл бұрын

na bro i mean the comb blade is uneven on one side is thiker then other side so pretty much one side cut more shorter then other side il make a vid soon to explain to people and like i said my styliner 2 blade i think its defected piece of crap

@barberjfademaster2311 12 жыл бұрын

have you ever cut any celebrities?

@getthesenets1286 7 жыл бұрын

Watched this video a few times, and these might be bootleg trimmers. I've owned about 8 Outliners and I've never seen or heard of ones with any on/off markings or stickers. The legit Andis Outliners have seen reduced quality since maybe 2008. And when they started making the ones with the long switch, the quality is completely garbage .

@DelaceLeCoiffeur 7 жыл бұрын

Thanks for the comment.

@getthesenets1286 7 жыл бұрын

Thanks for putting this video up though. They started making the cheaper ones once they noticed that more consumers were buying them for personal use. They make cheaper quality ones now, so that customers have to keep buying new outliners ever 3-5 years. I had outliner that lasted 10 years, I'd just replace the blade every few years. Andis would lose money if their trimmers lasted that long now, so they build them to break down sooner.

@DelaceLeCoiffeur 7 жыл бұрын

+get these nets yeah I noticed. I got the 2 older trimmer from a retired barber shutting his shop down. Profit margins up, quality down.