Watch This Before You Buy! Huina 1580 V4

Рет қаралды 113,438

Күн бұрын

Meet the Huina 1580 v4 RC Excavator 1/14 electric scale model (Get yours here: amzn.to/3O3hlXY). Also known now as the Top Race TR-211M and previously known as the Huina 580, it comes with 3 attachments: bucket, breaker and claw/grabber. Join me for a deep dive into the working components, weak points, cool factor and manipulator strength as we use, review and test this sweet piece of RC tech!
Spoiler: I really like it. It works very well. It is worth the money if you're considering an excavator!
Our Huina 1580 upgrade video: • Making the Huina 1580 ...
Our upgrade article: rc-tnt.com/how-to/huina-1580-...
Affiliate links help the channel grow if you use them (thanks!)
-
Buy the Huina 1580 (aka. Top Race TR-211M):
Available on Amazon: amzn.to/3O3hlXY (different brand, exact same machine)
A cheaper model to consider: amzn.to/3Y4LE3S
This model was purchased with my own money and is not sponsored. I list the above stores to help support the channel (so if you click the above and buy through that, I may get a commission, which supports RC-TNT - thank you!). As always, my review is honest and unbiased to the best of my ability - we're exploring this model together! Thanks for coming along :)
-
Chapters:
0:00 Huina 1580
0:47 Hydraulics vs Actuators
1:06 Huina 1580 Weight
1:20 Packaging
1:30 Controller
2:01 Attachments
2:20 Battery
2:36 Details & Layout
3:20 Control & Delay
4:20 Boom Operation
4:45 Huina Smoker
5:02 Breaker Attachment
5:35 Bucket & Grabber
5:51 Lift Capacity
7:23 Grabber Demo
8:29 Vehicle Scale
9:50 DIG THAT LIKE BUTTON
Follow us:
Twitter @rctrailandtech and on Instagram:
/ rctrailandtech
#rcreview, #huina, #rcexcavator, #huina1580, #huina580, #toprace,
--
Got a few spare dollars left after that latest upgrade or rig build?
Consider putting them in the hands of those most in need, right now.
This is Give Directly - not a sponsor, nor affiliated with RC-TNT in any way, except that I've made this little campaign where we can combine our powers and do some good in the world. Check it out here: community.givedirectly.org/ca...

Пікірлер: 167

@YoShImUrA53 2 жыл бұрын

Quite the novelty. I wouldn't have checked this kinda video unless it had been done by you, but it was quite entertaining. I hope I don't get into these... so many kinds of RC, my walltet just can't keep up!!

@RCTNT 2 жыл бұрын

Dude I know the feeling. Hey, have youtube channel, that's the justification, right? Lol I never had any interest in these either until I randomly looked into them the other week. And then I showed it to my crawler mates and they thought it was awesome, which made me think there would probably be others of us unaware of this related niche. And so here we are! Sorry, wallet.

@YoShImUrA53 2 жыл бұрын

@@RCTNT hahaha, fair enough! :D

@muskokamike127 2 жыл бұрын

You want to blow your mind? Check out some of the German ones. $15K USD and up. They DO have hydraulic pumps and reservoirs and are unbelievable. I mean truly works of art.

@new_comment Жыл бұрын

wow, I can't imagine having "toys" like this when I was a kid, in the 80s.

@RCTNT Жыл бұрын

Heh, same! I used to dream of such things as what's around today. Things were starting to get better in the later 80s as plastics were improving and by the early-90s I'd saved up for my first proper stadium truck kit build. But things like this, for so little money by modern standards, were just unheard of!

@mavicprotoe3959 6 ай бұрын

I use a mini digger for my job so get to play around for real and get paid also 😂

@RCTNT 6 ай бұрын

@mavicprotoe3959 and that is the desirable outcome, isn't it! I suppose that's happening for me with youtube. A situation for which I am indeed grateful! Thanks for dropping by 😎

@curtisck813 6 ай бұрын

Right??????......that's why I had to get one...got the front end loader too...lol Looking for the dump truck now

@farouqomaro598 2 күн бұрын

We had Tonka

@burksthepenguin 2 жыл бұрын

that thing looks like mad fun!

@RCTNT 2 жыл бұрын

It really, truly is! I never had any interest in these before but once I found them I had to share it with my crawling peeps. It's so much fun!

@hadynmcloughlin4661 8 ай бұрын

Interesting thanks for sharing always wondered about rc tractors/machinery.

@RCTNT 8 ай бұрын

Thanks for watching! I find this stuff really interesting and fun, too :)

@S.A.N.D.B.O.X.B.O.Y.S Ай бұрын

Great video man! We use a huina 1592 at the moment, but have a 1594 coming for our next shoot 🤙🤙

@RCTNT Ай бұрын

Nice. I've got the 1599 here patiently awaiting a video too. They're fun eh.

@Grecki_Bog_Domestos 2 жыл бұрын

I waited for so looong to get any construction vehicle thats not totally garbage and does not cost a 4000€. Thanks for review, keep delivering. Huina has some more to show:)

@RCTNT 2 жыл бұрын

Woohoo! Glad you enjoyed! I'm looking at an upgrade video or series for this thing. Made the 'stick' cylinder gears click yesterday (through misuse, tried to lift the track when I didn't realise a bucket tooth was stuck under it), so there's potential for it to fail completely if I'm not careful. Keep an eye out for that, it's coming. This is a very solid machine and when I consider it's cost next to a typical rock crawler, I think the value for money is about the same. Yeah, they're making a dollar on these things, but they're thoughtfully designed and the value is there, I think. Cheers

@Grecki_Bog_Domestos 2 жыл бұрын

@@RCTNT thank you for review cause there is not much from advanced rc guys about this digger.

@RCTNT 2 жыл бұрын

@@Grecki_Bog_Domestos I had noticed that the when looking before I bought, yeah. Glad it was helpful. Can confirm there's more coming now - we'll do an upgrade and tuning video on it in about a month. Catch you then!

@ricardomontajes4013 4 ай бұрын

Hello bossing watching from Philippines.nice huina excavator i like it😊

@RCTNT 4 ай бұрын

Hey, thanks 🙏

@RC-CARS-WORLD 2 жыл бұрын

Awesome review my rc friend, great machine, good job 😀👍

@RCTNT 2 жыл бұрын

Hey, thanks for watching! Appreciate the encouragement :)

@suneelpal3443 Жыл бұрын

@@RCTNT iitikuu tkukuuiuuuukkjluo yuk uuojpupkkuukuujuppp uukjuuh ukjku I u

@WarSociety 2 ай бұрын

You can use it to make tracks for crawlers

@HDCApollo 8 ай бұрын

Nice rap-up. Thanks for the info and impressions. =)

@RCTNT 8 ай бұрын

No worries! I also have a follow-up vid that covers some upgrades I made, if you're interested: kzfaq.info/get/bejne/g5uooNB3mp2bn5s.html Cheers :)

@rc-huina8221 2 жыл бұрын

Nice Video Excavator my friend 🤗👍

@RCTNT 2 жыл бұрын

Nice excavator, my RC friend :)

@defender.cameltrophyitalia5176 2 жыл бұрын

Greeeeeat 💪🏼💪🏼💪🏼💪🏼 congratulation 🇮🇹

@muskokamike127 2 жыл бұрын

This reminds me of the bosch mini chainsaw: no one needs one but damn, everyone wants one! lol

@RCTNT 2 жыл бұрын

I've not heard of it but I love my little electric chainsaw! Super handy for small jobs and no mess or hassle of getting the big unit out. Nice analogy :)

@mikealexis 2 жыл бұрын

Very nice video presentation, I am thinking about another excavator maybe one like that

@RCTNT 2 жыл бұрын

Glad you enjoyed it. I've got an upgrade video coming soon when all the delayed bits finally get here! Cheers

@mikealexis 2 жыл бұрын

@@RCTNT I have you on notification so when you launch it I will see it. Looking forward

@robertwashington4008 8 ай бұрын

You know alot about rcs am wondering if you could help me my main board went out on my 1580 exavor and I was just wondering if I can get away with buying a new board for it or do I have to buy the new radio as well bout together

@RCTNT 8 ай бұрын

Hm, I don't know for sure, but I'd expect that when you turn a controller on and then the new board, it should bind and "just work". I can't promise this, but I'm pretty sure you can just replace the board. If it helps, it's what I would do! Hopefully it works out!

@ka4172 Жыл бұрын

Time goes by and now the state of the art are the double E e160e electric excavator.

@RCTNT Жыл бұрын

Fair enough. I just went and looked at the EC160E and I don't necessarily agree about it being better - they both use electric actuators, right? It does look better, for sure. Certainly, the little Huina here never was state of the art. Cheap, yes. But people have been making hydraulic RCs for quite some years now, even some smaller ones which generally leave the actuator-powered ones in the dust. I'm building a better version of my large hydraulic excavator, upgrading the brushed motors to brushless and improving the oil tap servos. There are usually ways to improve these things :)

@MrStevegibb 6 ай бұрын

Digital FPV on this Badboy would be amazing.

@RCTNT 6 ай бұрын

Even analogue fpv was pretty fun kzfaq.info/get/bejne/d66Idsqjpt3dmYk.html Digital would be even better, for sure!

@Taylor_Motorsports 3 ай бұрын

Awesome video buddy but I got a question, the link in the description to get this takes you to Amazon and the brand that the link takes you to is a “top race” brand, is it the same brand just renamed?

@RCTNT 3 ай бұрын

Oops, thanks. I've added a note on the video description now to address that. It's the exact same machine, just with different branding. I also noticed they have updated the radio transmitter now, but the machine is the identical, to the best of my close inspection!

@Taylor_Motorsports 3 ай бұрын

Awesome! I just wanted to make sure. I figured it was and thanks for getting back so quick!

@RCTNT 3 ай бұрын

No worries at all. Thanks for using my link. If you buy it, I really hope you enjoy it. Great little machine, this. Cheers

@ShortFingerRC 3 ай бұрын

Hey Craig, wondering if you lnow how to bind the 1580 transmitter to the excavator? Iv got a new transmitter for mine but am struggling connecting it. Thanks

@RCTNT 3 ай бұрын

I couldn't find the specific binding process for the Huina 1580 RC excavator in the forum discussions I checked. The threads mostly focused on general discussions about the excavator, upgrades, and issues users have faced with their models, but they didn't provide a step-by-step guide on how to bind a new transmitter to the excavator. Since the binding process can often be quite specific and might involve a particular sequence of powering on the transmitter and the excavator, along with possibly pressing certain buttons in a specific order, it might be helpful to search through RC forums or communities dedicated to construction vehicle models. Sometimes, experienced users share detailed guides or can offer advice based on their experiences with similar models. In the absence of a clear guide, you might also consider reaching out on these forums directly with your question. Members of communities like RCGroups often have a wide range of experience and might be able to offer you the specific advice you need for the Huina 1580. Good luck!

@ShortFingerRC 3 ай бұрын

@@RCTNT Well I appreciate that anyway. I've emailed Huina as well as researched a few forums....I'll continue my search. Thanks!

@RCTNT 3 ай бұрын

If you work it out, share with the class. It'd be good to know for future reference. Thanks!

@ShortFingerRC 3 ай бұрын

@@RCTNT will do!

@tigerone2353 Жыл бұрын

Liking your channel more and more.

@superchargerone 11 ай бұрын

About the weight discrepancy, it could be a translation error between the Chinese weigh scale ”Jin” vs kg. Jin and kg sounds similar in their language but aren’t the same. 2 Jin = 1kg which might explain why the stipulated weight of 11+ was double what you weighed in kilogram 5+kg. Anyway I love your channel and this little distraction of yours is seriously tempting me to get an excavator! Thanks for putting out the videos.

@RCTNT 11 ай бұрын

Hey no worries! Thanks for the explanation, that's a good theory. Glad you enjoyed it and thank you for your positive words :)

@tittentei7331 6 ай бұрын

Hey. How much most i use to get a very god exvatacor? Is huina 1593 good? Can you name one i should buy? around 400 500 dollar?

@RCTNT 6 ай бұрын

For that money, this model (1580) is still the best choice. The 1593 is weaker, but if you're only playing lightly, it'll do. Stretch to 1k and you may be able to find a basic hydraulic one that'll be a shade better.

@cat-cambodia1801 2 жыл бұрын

good rc🤩🤩🤩

@alanspring8462 6 ай бұрын

I got mine for about a $100 from Amazon happy to subscribe.

@RCTNT 6 ай бұрын

You got a 1580 for $100?! When? How? I have questions! Bargain of the century here! Nice one

@edenhinojosa9633 2 ай бұрын

Probably the plastic version?

@RCTNT 2 ай бұрын

You've gotta think so, right?

@jonathanyoon8651 2 жыл бұрын

Thanks for the review. Do you have a photo of the excavator next to the scx24? I have been looking for a scale excavator to go with my scx24s but the only 1:24 scale excavators I could find do not match the performance of even the more basic 1:14 or 1:16 scale excavators. I found a 1:20 scale excavator that has good performance, but it is priced far too high for my budget. So thus I've been looking for some midrange 1:14/1:16 scale excavators instead. Thanks!

@RCTNT 2 жыл бұрын

Hi Jonathan, you want this video at the 2:25 mark, give or take: kzfaq.info/get/bejne/ibF3g6-antq2noE.html That's the Scx24 JLU right next to the 1580. The scale is getting closer. It isn't exact but it's not too bad. Also, you get a driver's perspective of size difference via FPV in the SCX24 at about the 3:14 mark on this video: kzfaq.info/get/bejne/d66Idsqjpt3dmYk.html

@canyontanner4736 10 ай бұрын

Do you know how long the run time/ battery life is? Im sorry if you already said it in the video, but i didn't catch it.

@RCTNT 10 ай бұрын

I'd have to guess as I haven't used the stock electronics in it for some time. 25 minutes, give or take?

@canyontanner4736 10 ай бұрын

@@RCTNT thank you

@RCTNT 10 ай бұрын

🫡

@peregrineflow7354 2 жыл бұрын

I sort of want to see it run your crawler course. Yes, you can use the arm lol. Have you seen these things maneuver on a hill like that? I am impressed with the Hulna. I had no idea. Well explained with some good laughs too.

@RCTNT 2 жыл бұрын

Oof I wouldn't want to try! But I have small pile of upgrades sitting here waiting for a video update on this little machine. Really must get around to that!

@jgminiaturas8319 25 күн бұрын

Brasil 🚜👍

@TransAmDrifter Жыл бұрын

Funny thing is, that original CAT 336d is 3.29m wide, and Huina 1580 is 18cm wide, which makes for 1:18 scale. Definately not 1:14. Same goes for WPL B36 and JJRC Q61 truck. On the box it says 1:16, while after calculating the dimensions, it sums up for 1:18.

@RCTNT Жыл бұрын

It's a bit cheeky, but that's just a shadow of the dozer they make. It is 1/16 on the box but I calculated it to average out to 1/29 scale!! I've got a video around here somewhere for it.

@artagain8977 Жыл бұрын

Thanks for posting this as I’m on the fence about getting into this hobby. I think I have too many now but wth.

@RCTNT Жыл бұрын

Haha yes, they do add up. RC construction equipment is super fun though! (Hydraulics is really where it's at, but $$$ is a barrier to entry unfortunately. Huina bridges the gap reasonably well, at least with the excavator).

@13panda13 Жыл бұрын

Chinese manufacturers lie and then lie some more. You making out it doesnt really matter is worse. But thx for pointing out the b.s. Now im not buying one.

@alexanderbailey3128 5 ай бұрын

There is a long arm excavator by the same company that’s orange you should try out! I like seeing these before buying them this is much appreciated!

@RCTNT 5 ай бұрын

Maybe I will, thanks for the prompt. I'll check it out. That's the 1551, you mean?

@RCTNT 5 ай бұрын

It's on the way, so we'll check that out in the coming weeks at some point.

@boldandthebeautifulgimbal2881 6 ай бұрын

Giddy mate thanks for the upload. Great video! Curious, how much does a machine with real hydraulics cost? And are there any in Australia that aren’t as much as the real thing lol in price thanks mate.

@RCTNT 6 ай бұрын

They are getting cheaper. One way is to buy one of these Huina 1580 models and spend about the same again on a hydraulic conversion kit. The next cheapest way is to get one like mine: kzfaq.info/get/bejne/prGdZ9uZy8uReWw.html . Not in Australia, but that's what I know of anyway!

@Doubledeepfried 11 ай бұрын

If I would have a big (and private) yard I would buy these instant !

@RCTNT 11 ай бұрын

For sure, they're so much fun! Put it on your list for "some day". You won't regret it :)

@Doubledeepfried 11 ай бұрын

@@RCTNT Haha definitely on the some day list. (or spend the money and hire a real one for a day) ;)

@RCTNT 11 ай бұрын

Yeah man that'd be fun

@stevenjacobs270 Ай бұрын

bro one qeustion , the oil for smoking how long can you used it before there oil back aigain need?? and is the smoke danger inside??

@RCTNT Ай бұрын

A long time. It comes with a little bottle for it and you only use a few drops at a time. It'll last more play sessions than you'll use it, most likely. No danger. Uses fine copper braid with voltage passed through it to heat up, like a car cigarette lighter. The liquid smokes at a relatively low temperature. Completely contained, enclosed, and quite safe 👍

@stevenjacobs270 Ай бұрын

i mean if i do tomrrow 4 drops and i long can i play before i need back give it drops

@RCTNT Ай бұрын

Oh right, 15 to 20 minutes on 2-3 drops, from memory. It's not a big deal, easy to refill.

@stevenjacobs270 Ай бұрын

thanks sorry btw for bad engels

@stevenjacobs270 Ай бұрын

dit you know whith one is better then hunia 580 and bigger.?

@MollydogRadar Жыл бұрын

For that kind of money they should have made forward and reverse proportionate.

@RCTNT Жыл бұрын

I kinda agree, but if it helps, it's too slow to really be a problem. It didn't stand out to me during testing, for whatever its worth!

@stevenjacobs270 Ай бұрын

can you use it in the rain or.? of you wanan clean him can you clean it whit much water

@RCTNT Ай бұрын

I mean, it'll survive a light shower, but no, it isn't waterproof. In your last question I answered with my upgrade article - that includes a section on waterproofing the PCBs in the machine. You can clean it with a rag or a wipe. Brush out the tracks with stiff bristled brush. Don't use a hose or running water.

@stevenjacobs270 Ай бұрын

oke thanks i test him right now i do 4 drops in it it smokes no more ibdo back 2 drops no smoke any more how i can send you a video

@RCTNT Ай бұрын

Do whatever the manual says, don't exceed it or it won't work. It's been a while, but doesn't it say just 1 or 2 drops? If you've done more, just keep using the machine with the smoker on and eventually it'll start to work again. Might take a few play sessions though.

@stevenjacobs270 Ай бұрын

but that's just it, I received it and I don't know if it was there or not, so I did something like 4-5 times as stated on paper, it worked the day I cut it, it works and suddenly nothing stops anymore.

@RCTNT Ай бұрын

You've added too much oil and it worked and then stopped working? Or you added the correct amount and it worked, and then stopped?

@stevenjacobs270 Ай бұрын

i order mine today i have a quistion from belgium can you build a guy on de steering wheele or you dont can open the door or something

@RCTNT Ай бұрын

See my upgrade video. You can't open the door but you can get to the cab from underneath. Some disassembly required. Enjoy!

@stevenjacobs270 Ай бұрын

kan you say my whit one the 580 or the volvo ec160e???? what you think of that i am from belgium bad engels sorry

@RCTNT Ай бұрын

I am not familiar with the EC160E, I'm sorry. (Maybe I should get one and compare the two... Edit. Oh I see, this one will be like the 1592. Weaker, very likely, for that money.) The 1580 is good, though. Hydraulic even better, but that's more money. And if you spend less, on like the 1592, the weaker gears will be a problem. I like the 1580. Mine is still great, even a few years later.

@stevenjacobs270 Ай бұрын

and its slow too cirle arround whit the volvo ce160e you can set it slow and fast

@RCTNT Ай бұрын

Once you're using it, I don't expect that will be a big deal either way

@shaungwatkin1638 Жыл бұрын

Hi I just brought one yesterday was playing with it today the worm drivr on on bucket is over screwing out there should be limit switch on it and seaping oill from the drive too ☹️have contacted the shop will take back on Wednesday 😮‍💨

@RCTNT Жыл бұрын

Ah that's no good! Hope they get you sorted easily. It's a well designed machine overall so maybe it was just a dud switch or something. Sorry to hear it anyway!

@shaungwatkin1638 Жыл бұрын

Thank you 🙂👍

@rctop1011 Жыл бұрын

someone plz??..how to clean this excavator cause that not water resistant

@RCTNT Жыл бұрын

Dry toothbrush for tracks, wet wipe for body. Can disassemble and really clean at the parts level if you got really muddy!

@rctop1011 Жыл бұрын

@@RCTNT thank you very much

@canario3342 2 жыл бұрын

Great review, thanks. The weight should be 7 kg.

@RCTNT 2 жыл бұрын

Thanks! Re weight, I don't know what to tell you, there. I reported what I weighed and those same scales report 5kg when I weigh a 5kg weight plate, 2.5kg for same and 10kg for same, so they're accurate. I guess manufacturing processes aren't the tightest with these things, but still, a 2kg weight difference? Are you sure yours is 7kg? (not saying it isn't, but 2kg is a big difference between our two units!)

@jstro-hobbytech Жыл бұрын

That is awesome

@RCTNT Жыл бұрын

They're still quite popular. I need to get around to doing a video for my bigger hydraulic one

@jstro-hobbytech Жыл бұрын

@RC-TNT you have a bigger one??? Haha awesome. Another annoying question. Does having a gyro help when just crawling focused? I'm buying a decent transceiver today.

@RCTNT Жыл бұрын

Yes I do and it's epic! Gyro is pointless on a crawler :)

@jstro-hobbytech Жыл бұрын

@RC-TNT sweet. Money saver. How many channels? I plan on doing alot of custom wiring and such. I've been testing engine sounds and it's a method no one uses hehe

@RCTNT Жыл бұрын

I've made a few different engine sound setups myself. At least 5 different kinds: custom arduino one that included reverse beep, smoke control and start up and stop rumble; a diesel one by a UK hobbyist; a couple of cheap Chinese no brand ones; the ess one and duo ones; the Cross RC branded one in my BC8 Mammoth; plus a couple of others I can picture but can't recall names for. Though an extra channel can be helpful to change pitch, volume, start/stop and horn sounds, you really only need a y-harness on the throttle channel. A channel for winch. 1 or 2 for diff lock. Another for high/low speed. For cost effectiveness, the best one I can recommend that does all this is the Flysky GT5: asiate.es/aff?l=150074&i=76070 The nice thing about the GT5 is that you can buy the FS-A3 and FS-A6 receivers for very little money to add models to the radio. I have several GT5 handsets here and their 20 model memories are mostly full. They're great.

@armx3308 2 жыл бұрын

How much is the price please

@RCTNT 2 жыл бұрын

You'll have to work that one out yourself. It varies depending on where you buy and where you are in the world. Just do a Web search for 'huina 1580' and you'll have your answer. Cheers

@Agatha-Toys Жыл бұрын

I have huina 1550 but not strong.

@RCTNT Жыл бұрын

The 1580 needed more power too, hence my upgrade video, so I can appreciate the 1550 would be lacking. Still, they're great models eh!

@user-rcrc 4 ай бұрын

У меня такой же)2 года уже и не сломался ни разу

@RCTNT 4 ай бұрын

Очень хороший! мне все еще нравится эта машина 😎👍

@user-rcrc 4 ай бұрын

@@RCTNT я с вами согласен)я ещё гидравлический имею,25кг тоже крутая вещь)

@RCTNT 4 ай бұрын

О, круто! Я тоже! Хотя я пока не очень хорош в этом. kzfaq.info/get/bejne/prGdZ9uZy8uReWw.html

@user-rcrc 4 ай бұрын

@@RCTNT классный экскаватор))))у меня xdrs liebherr 945)))))хочу купить ещё kabolite k970)))

@RCTNT 4 ай бұрын

Да, этот выглядит очень хорошо. Когда-нибудь, а?

@embededfabrication4482 9 ай бұрын

Needs head tracking fpv

@RCTNT 9 ай бұрын

Heh, I did experiment with fpv in this machine a couple of years back, though not with head tracking! kzfaq.info/get/bejne/d66Idsqjpt3dmYk.html

@stevenjacobs270 Ай бұрын

Too bad you have to change the box with the screws and that you can't do this with your remote control

@RCTNT Ай бұрын

You can do it with the radio with an upgrade - a powered, tool-free bucket-swap adapter! It's included in my more detailed write-up (including links to where I got the parts): rc-tnt.com/how-to/huina-1580-upgrades/

@unknown-nd6li Жыл бұрын

Weight of this one?

@RCTNT Жыл бұрын

See 1:06 onwards. Bit of an explanation for that, but mine was 5.4kg. (and thanks for asking the question! My chapters were all messed up. Fixed now, thanks to you!)

@unknown-nd6li Жыл бұрын

@@RCTNT sorry

@RCTNT Жыл бұрын

@@unknown-nd6li you didn't mess anything up! Your question led me to realise I'd made a mess. You helped me fix it! Thanks again :)

@trevorcourt1403 Жыл бұрын

its not hydraulic then

@RCTNT Жыл бұрын

This one? Nope, linear actuators :)

@norro21 4 ай бұрын

You didn't measure the strength, you measured the weight of the cab part

@RCTNT 4 ай бұрын

It was imperfect but it did measure the strength of each component. The cab sits on the chassis, over the tracks. That's on the ground. We're measuring the arm pulling up, away from the ground.

@norro21 4 ай бұрын

@@RCTNT but you hadn't pinned it down to the ground, the only thing holding it down was leveraging against its own weight

@RCTNT 4 ай бұрын

@norro21 the chassis was being pressed into the ground. The arm was trying to lift. The scale measures the pull upward from the ground anchor in this case.

@JakelsAwake 2 жыл бұрын

In the description theres an link to aliexpress whats an Chinese scam website why did you put an link there?

@RCTNT 2 жыл бұрын

A Chinese scam website? I've used a mixture of local stores and big online places for many years. AliExpress, Banggood and direct factories in China, AsiaTees in Hong Kong, Amain & small manufacturers & sellers in the USA, Hobbies Direct and Metro Hobbies locally to me here in Australia, etc etc. No scam, just the places I've been using for about a decade in most cases, and for some, much longer.

@JakelsAwake 2 жыл бұрын

@@RCTNT Ok

@roblapouple7552 2 жыл бұрын

you can buy direct from huina which have stock in distribution centers around the world for faster delivery .. they have stock in australia for you diggers.