Watchmaking Tools - The Staking Set
Рет қаралды 2,414
5 ай бұрынCameron Weiss, master watchmaker and founder of family-owned Weiss Watch Company, dives into watchmaking in this new series.
Cameron talks about the watchmaker's staking set. As a very visually intriguing tool, I am often asked about them when people visit my studio workshop. It's one of the most versatile and important tools a watchmaker requires. Learn all about the use of the staking set, and maybe even find one for yourself. If you have no use for it, they are still amazing vintage decoration pieces for your bookshelf.
Directed, shot, edited by Andrew Reed at the Weiss Watch Company workshop in Nashville, TN. weisswatchcompany.com #watchmaker #watch #watchrepair #watchmaking #craftsman
@Texmotodad 5 ай бұрын
Fascinating!!
@Johnfsu 5 ай бұрын
Definitely learned something completely new with this one!
@johanvandersandt8904 5 ай бұрын
We have staking tools in aviation but they are tad larger than yours. 😅 They are quite diverse in their usefulness. Thanks for sharing Cameron!
@Not-a-bot222 5 ай бұрын
Nothing scarier than the thought of an unstaked PC link. For us rotary weirdos that is
@johanvandersandt8904 5 ай бұрын
We use them for rivets, removing material from skins, setting bearings, Marking positions on ribs, ect. What I know about radial engines is dangerous haha! But you have got to love the engineering behind them. Those Rolls Royce engines are marvelous to behold!
@Not-a-bot222 5 ай бұрын
@@johanvandersandt8904 I mean rotary as in rotary aircraft. Helicopters lol sorry for the confusion
@johanvandersandt8904 5 ай бұрын
@@Not-a-bot222 No worries my friend!
@jlpower 5 ай бұрын
Fascinating video! When checking the jewel bearing IDs after staking, are you using gauge pins, Deltronic pins in .0001 increments, or are you using some form of optical measuring equipment? How much interference is needed to hold a jewel bearing in place, or is it not really calculated to that level? I'm interested in the whole inspection process in general, but I'd love to check out some of the drawings for the bridges and main plates just to see your datum and dimensioning setup. Are the jewel pallets staked into the fork as well? Loving these videos!
@thewatchmakersworkshop 5 ай бұрын
This depends on the bridge material and the jewel size. But as an example, a 1mm OD jewel will hold nicely with a 0.99mm reamed hole in a brass bridge. The hole will be checked with a gauge pin or optically.
The Watchmaker's Workshop
Рет қаралды 2,2 М.
WATCH with Mike
Рет қаралды 2,9 М.
Watch As I Learn
Рет қаралды 50 М.
My Hobbies are NOT Cheap
Рет қаралды 5 М.