Safe Cracking with a 60,000 PSI Waterjet

No video

Safe Cracking with a 60,000 PSI Waterjet

Рет қаралды 224,344

4 жыл бұрын

We now offer safe opening services. We got a safe loaded with valuables, and tried to see if we could open it without totally destroying everything. Do you have a safe that needs cracking? Let us know in the comments.
Music: David Cutter Music - www.davidcutter...
Don’t steal our videos, if you’d like to use our video for something please contact us via email.

Пікірлер: 338

@D-S-9 4 жыл бұрын

You should have left the silica gel pack inside, would have avoided all that water damage.

@pantherplatform 4 жыл бұрын

I just started watching the video. Sounds like it's going to get wet inside.

@Gonzo.S.Thompson 4 жыл бұрын

@@pantherplatform that's what she said.

@tori9365 4 жыл бұрын

@@pantherplatform uuhhh.....

@TheCuteLittleDoggy 4 жыл бұрын

yeah put all the money back in, then add rice, the money will be fine I swear

@tori9365 4 жыл бұрын

@@TheCuteLittleDoggy hi 🤗

@Gonzo.S.Thompson 4 жыл бұрын

"I can't help you I'm holding the camera". Now that is a dedicated cameraman right there. 😉👍

@bradenweller2531 4 жыл бұрын

Sounds like something my fatass would say😂

@minecraftmarioboy5012 3 жыл бұрын

Lmao yes

@OptimusSubPr1me 4 жыл бұрын

wetness on 1, little bit of liquid on 2, 3 is binding....

@destroyerwwe1 4 жыл бұрын

solid ass reference 11/10

@I_Mark_Mills 4 жыл бұрын

I love lockpicking lawyer. Binged like 100 of his videos before getting a kit for myself. It's good fun.

@jeffhousen8968 4 жыл бұрын

in any case, that's all I have for you today...

@QueLastima 4 жыл бұрын

Fantastic reference!

@neoleomedia1676 4 жыл бұрын

This was solid, and made me laugh. 150/100

@Serana64 4 жыл бұрын

It took me longer than I'm willing to admit to realize that I clicked on a Waterjet Channel video and not a Lockpicking Lawyer video.

@lemonaliwo7710 4 жыл бұрын

same xD

@SkippyDa 4 жыл бұрын

You could've known that it wasn't a lockpicking lawyer video, since it was longer than 1,5 minute.

@deephorizon1365 4 жыл бұрын

Lol

@DanteTorn 4 жыл бұрын

It took me a second as well.

@natesky6603 4 жыл бұрын

"Hello, this is the LockpickingLawyer, and today I'm going to open this safe with a fork"

@blackmarketyardsale 4 жыл бұрын

4:41 “burnya hot”? That’s an official temperature scale, right? “It was two degrees under burnya”

@boxedfender4810 4 жыл бұрын

Technical term.

@samuelmoser7963 4 жыл бұрын

And 10 degrees under murder hot

@tiarareihmequiota6618 3 жыл бұрын

@@samuelmoser7963 thats law hot

@yuri_s_ 3 күн бұрын

This was the best WJC content. Miss them dearly.

@pvanukoff 4 жыл бұрын

I was hoping this would be a collab with LPL. :)

@lavaenderman5263 4 жыл бұрын

Yes

@electronicsNmore 4 жыл бұрын

I'm still amazed that they're allowed to sell that stage money, it's almost identical to real money, but does look a little larger. Great video!

@WaterjetChannel 4 жыл бұрын

You could fool a kid with it

@electronicsNmore 4 жыл бұрын

Never forgot the time I tricked my buddy into thinking he won the Florida Lottery. Laser copiers and image editing software made it all happen. He was pissed when he found out he didn't win 10M. LOL

@y2n610 4 жыл бұрын

Today on Lock Picking Machinists I have for you...

@hitandrepair 4 жыл бұрын

y2n610 pin 5 feels sheered off, and I’m in.

@nocount7517 4 жыл бұрын

"This is the Waterjet Lawyer, and what I have for you today..."

@PJSproductions97 4 жыл бұрын

I look forward to in a few days when LPL opens the same safe in 3 seconds with a water gun or somehting

@nathandamaren2093 4 жыл бұрын

Oh heck yes. Open it up lpl!

@S703steven 4 жыл бұрын

So if I bring a safe with all my debt in it, you’ll open my safe and take half my debt? I’m in!

@Adam-kr8wy 4 жыл бұрын

"I mined it this weekend" LMAO

@12345....... 4 жыл бұрын

And smelted it!

@onrsora4673 4 жыл бұрын

if the waterjet is truly so hot as it seems you might be able to cook something with it

@2MeterLP 4 жыл бұрын

I think the heat is from cutting the steel

@jordanstatler4661 4 жыл бұрын

I guess I don't know for sure but I work at a company that uses high pressure water, up to 40,000 psi, for cleaning industrial equipment and I know that starting with our 20k unit the water gets very hot in the whole process of it being pumped, pressurized and recirculated (especially through a smaller tip) and all that. These guys may have a very different type of pressure unit though where that isn't the case but I don't know.

@MrCODEmaster00 4 жыл бұрын

@@jordanstatler4661 they have the same pump, filter, filter, filter, (I think filter again), refilter as I assume most routes take for high PSI stuff, but they have garnet that is introduced in the loop as well. TL;DR Unless garnet is a great heat absorber/conductor I assume due to the water being pressurised alone creates the vast majority of heat.

@wilerat 4 жыл бұрын

Yeah, it'd probably be nice to put a couple of eggs in this safe and see if they can boil :)

@spazzCAPP 4 жыл бұрын

5:03 reminded me of the safe opening scene in titanic where they pull out all the rotten cash and stuff.

@kemphoss-4791 4 жыл бұрын

What, the ship sank! Spoilers much!?

@LDaniel_BDuce 4 жыл бұрын

Random thief: How am I going to get into this safe Me: pulls Waterjet out of my pocket

@DeafKingz 4 жыл бұрын

I wonder what lock-picking lawyer thinks about this...

@JacuzziSurfer 4 жыл бұрын

NAGG3R SWAGG3R I was just about to write the same thing... collaboration? 🙏🏻🙏🏻🙏🏻

@pws3rd170 4 жыл бұрын

Took way too long

@kemphoss-4791 4 жыл бұрын

Today im going to pick this lock with this waterjet Bosnianbill and i made

@kemphoss-4791 4 жыл бұрын

Today im going to pick this lock with this waterjet Bosnianbill and i made

@TesserId 4 жыл бұрын

He would definitely not have gone through the thicker portions on the front.

@Christian-cz9bu 4 жыл бұрын

I like on the test pass the nozzle was perfectly lined up, then you turn on the jet and it kicks it ever so slightly out of square.

@yerwol 4 жыл бұрын

Could you use the same technique as in the bottle opening video where you have the safe fully above the water, but use a chamfer cut around it at 45 degrees to cut the bottom off?

@fosterbeal4153 4 жыл бұрын

awesome video, great to finally meet one of you!

@rachelo_xuxu4592 4 жыл бұрын

"I withdrew a small amount..." *Proceeds to pull out 10 thousand dollars and a gold bar*

@cptrikester2671 4 жыл бұрын

Interesting test. Great vid.😀👍 Hope to see some future volunteered reveal safe openings.

@MakesSens 4 жыл бұрын

Mitchell needs to put together a little stand up set. Delivery is on point.

@bt70a9 4 жыл бұрын

0:02 "Caahn uuu figure it ouHHHHHhhhhhh"

@jonathanorlando1294 4 жыл бұрын

You guys should have on Lock Picking Lawyer. Do a side by side time trial to open a safe.

@peterallen4331 4 жыл бұрын

Like the video but you can get into those safes by gently applying pressure to the handle and then hitting down on the top of the safe hard. The shock will make the locking solenoid jump and your in. No damage. But your way is a lot cooler.

@ajwash3247 4 жыл бұрын

Give that safe to the lockpickinglawyer and bosnianbill and they’ll have it open in 8 seconds using only a straw and intimidation

@Chocolate_dragon 4 жыл бұрын

I hope lock picking lawyer doesnt watch this. He opened that safe with a spoon

@ricknick5318 3 жыл бұрын

I've done that before and if you want to keep anything that's in it intact and worth anything or have a better chance of it because some of it's going to get broke or wet no matter what is the cut around the door

@gilberjohn5320 4 жыл бұрын

Theses safes can be opened if you bounce the bolt side of the safe and turn the nob while it's in the air.

@11bluedevil76 4 жыл бұрын

"So where did you learn to break into safes" "... it's complicated"

@12345....... 4 жыл бұрын

So many good sound bites in this episode

@gafrers 4 жыл бұрын

Use a 200K+ $ machine to "steal" 10K $ and a solid 24k solid gold bar. Movie logic. Loved the video

@harz426 4 жыл бұрын

Obviously that was painted aluminum but a solid gold bar that size would be roughly $100k. You'd only have to do that to two small safes to pay for the whole machine and come out ahead.

@trippprofant8747 4 жыл бұрын

Love ur channel man keep it up

@igorbaldo 4 жыл бұрын

Is it a joke that the music is composed by some David "Cutter"?

@southernhorizon9521 4 жыл бұрын

2 new job positions just opened up at your work. Safecracker and 3rd shift safe snatcher.

@Papierflugzeug95 4 жыл бұрын

2:21 The safe had a hole in the back. Edit: Also, you made some kind of diagonal cut when you tried to open the bottles a while ago. You should've done that here, with the entire front side of the safe, ignoring the door.

@SkyOctopus1 3 жыл бұрын

There's a design flaw with those anyway, they can be opened by jiggling the handle at the same time as giving them a solid whack on the top.

@michaelwaters5168 4 жыл бұрын

Fun video guys but the Lockpicking Lawyer could have opened it in 46 seconds with a squirt gun! In any case, that's all that I have for you today. ;)

@HaloHeathen 3 жыл бұрын

6:15 when folded over, so the "for movie use only" isn't seen, they really looks real!

@supertell 4 жыл бұрын

LockPickingLawyer would be proud.

@eduardosc3434 4 жыл бұрын

Theoretically you could just set the water nozzle at an angle and do an angeled cut so you could simply reach into the safe and grab shit

@ForeverMan 4 жыл бұрын

This is the WaterJetPickingLawyer....

@bobkin611 Жыл бұрын

Ok so its safe to assume, it would be hard to bring a giant waterjet with you to a bank heist, and it would just damage the goods inside the vault lmao

@jarniskat 4 жыл бұрын

maybe you should have cut on the edges on the thin side not the front, and make the cut at a 45 degree angle, so the water doesn't get in the box that much. Love your videos :)

@InspMorse85 4 жыл бұрын

I still think you should resin impregnate some items, you could make any angle cut then, get some cool perspectives things, I'd like to see an old walkman cut corner to corner!

@reggiep75 4 жыл бұрын

4:16 - I laughed too much at 'It's steaming!'

@pram2000 4 жыл бұрын

The safe is made of "Kuchenblech" 😂😂😂

@maxzet368 4 жыл бұрын

Kuchenblechmafia made it.

@PhillyPhill 4 жыл бұрын

I was going to hit the dislike button because of the wasted money until you guys came clean about the fake money. I was trolled, you deserve the like.

@nwmancuso 4 жыл бұрын

This would have been a great collaboration with Lock Picking Lawyer. Oh well.

@mtmadigan82 4 жыл бұрын

Wow amazing. I bet you have file cabinets in the office with thicker sheet steel than that.

@Qu-Fi 4 жыл бұрын

Every cameraman in a movie: 3:32

@richardadamson3643 4 жыл бұрын

Just wondering?🤔 can you make Springs with the water jet. I would love to have a" plastic spring"..

@bigchig01 4 жыл бұрын

U guys are funny. Now get another one and see if Mitchell was right. Drill it out with the waterjet

@derekrhodes4536 2 жыл бұрын

"We have to not damage the valuables inside" *proceeds to submerge the side with holes in it, in a few inches of nasty tank water* Can't wait to see the end of the video to see how it plays out... 🤣

@archiejmmiles6895 4 жыл бұрын

I have that same safe. Some advice, be careful when moving it, broke my toe.

@iRiselyTech 4 жыл бұрын

With these style safes you can just bang on the top of it to jog the latch and turn the handle without a key or inputting the code, it's really easy

@richardadamson3643 4 жыл бұрын

Yeah don't forget about your warranty🤔😂

@tonywarman31 4 жыл бұрын

You successfully made money confetti

@Tylerson 4 жыл бұрын

Would the same thing have happened if they had sprayed at an outward angle? I'm sure all the nasty goop water would still get in, but would it still shred what was inside?

@gavincurtis 4 жыл бұрын

Lock Picking Lawyer opens this exact model of safe with a plastic egg of silly putty.

@MrFrazierNation 4 жыл бұрын

Damn it, Mitchell!

@henrituhola 4 жыл бұрын

If it's got an electronic lock you can maybe open it with a strong magnet.

@gkeyman565 4 жыл бұрын

Actually all you need for that one is a heavy hand or hammer to hit it on top and bump the solonoid down unlocking the safe, while turning knob slightly. Look it up, an officers child died due to a safe given to the officers to secure there gun while at home, but it wasn't a 45 dollar safe like that one.

@17hmr243 4 жыл бұрын

the green press u have would have been fun

@Fanta.... 4 жыл бұрын

Even easier to just drill a hole in the side, and hit the code reset button. then create your own code and press that to open it up.

@cupofjoe2562 4 жыл бұрын

You should do a collab with the LockPickingLawyer

@unbekanntunbekant4587 3 жыл бұрын

the easyest trick to open a safe is take it of the wall and put an pice of metal or other stbilmaterials trougt the holes on the bag and try to push rhe reset button on the dor so after you reseted it you can type an new code and wala its open and even reusable

@mrmaigo 4 жыл бұрын

The Bureau of Engraving will replace the money, just send them what you got and a link to the video :D

@JDority 4 жыл бұрын

I have a safe up here in Logan that has no combo if you want to cut it open.

@kmfdm79 4 жыл бұрын

Do this again but attach a gopro to the backside of the door. I'd love to see that blender in action.

@jacobbudd2011 4 жыл бұрын

Mr. Crabs would be disappointed.

@Xavier_Ns 3 жыл бұрын

You should do a bullet proof vest and make a water jet prod vest

@NathanaelNewton 4 жыл бұрын

6 EMAILS IN ONE WEEK MITCHELL (and Dan too) GOD DAMMIT I request that the next item be Mitchel's email computer. I also copy-pasted the url from the email instead of clicking on your fake link that tracks me.. naughty naughty.. Jokes aside, Hope you're both staying SAFE and such during this time.. Thanks for the great content :D

@trevorvanbremen4718 4 жыл бұрын

Rule#1 of safe cracking... The safe door is almost ALWAYS the 'strongest' part... Cut somewhere else... In fact cut ANYWHERE else other than the door!

@itsfuujii 4 жыл бұрын

Next up, "How to Rob a Bank with a 60,000 PSI Waterjet"

@respetador 4 жыл бұрын

Hello everyone, this is the Lock Picking Lawyer...

@nogum9763 4 жыл бұрын

i personaal had put it on a 45 degree angle and just remove the 4 edges to mae the lid come undone, so the water will not flood the inside or at least not make money moosh ^^

@SirWallace2 4 жыл бұрын

I wonder what would happen with a real good safe 🤔 could that withstand a waterjet? Or is a waterjet the Boss fight no one can win?

@Sir_Uncle_Ned 4 жыл бұрын

In Australia, we use polymer banknotes. They would have survived

@StupidRobotFightingLeague 4 жыл бұрын

Art!

@useitwice 4 жыл бұрын

If you plan on continuing with this safe opening business, you should consider moving to Australia.

@mcknorth 4 жыл бұрын

Can you try to make a waterjet powered waterpump and see how much water it can pump in a minute and how high pressure?

@natethegreat3194 4 жыл бұрын

Which David cutter song is this

@rowinguy 4 жыл бұрын

I woulda done the can opener on a angle approach!

@andreym325 4 жыл бұрын

Real money would survive

@mikex5620 4 жыл бұрын

I wanna see what a combination lock does with the waterjet, like the skateboard wheel

@natethegreat3194 4 жыл бұрын

Dope channel

@StupidRobotFightingLeague 4 жыл бұрын

Nice beard Mitchell.

@CooManTunes 4 жыл бұрын

'Can you figure it out-uhhhhhh...?'

@NarlaxIV 4 жыл бұрын

I'm a locksmith and I can gurantee you if you slam that "safe" on the correct side and turn the handle it would open

@kennydidntdie6370 4 жыл бұрын

Instead of attacking the door what if you tryed to cut around the corner on an angle so the water has a better chance of not screwing everything up

@thewilliammao 4 жыл бұрын

Where is the @LockPickingLawyer when you need him?

@clintdoolittle1576 4 жыл бұрын

DAMN THAT WATER JET IS SO SATISFYING TO WATCH CUTTING EVERYTHING IN SIGHT I THINK THE ONLY THING LEFT WOULD B THE KITCHEN SINK LMFAO. OK WELL I THOUGHT THAT WAS FUNNY 🇨🇦😎👍🇨🇦😎👍🇨🇦😎👍

@GlAsseshalf 4 жыл бұрын

Are you ok bro

@clintdoolittle1576 4 жыл бұрын

@@GlAsseshalf why do u ask ?

@hitandrepair 4 жыл бұрын

Lockpickinglawyer would been great for this.

@nolanryan2234 4 жыл бұрын

Why didn’t you angle cut the safe open from a non-door side? The weakest part of metal. I would have angled it towards the outside and sliced a square hole.

@CoryMassacre2 4 жыл бұрын

I can't believe they didn't recreate the safe scene from Titanic.

@HDestroyer787 4 жыл бұрын

That safe has a nsfw drawing in it, I see what you're doing here

@litehousekid1 4 жыл бұрын

Could you make the water jet go sideways by shooting the stream thru a curved pipe?

@AlexAlex-sp7nb 4 жыл бұрын

If it's in Canada this would be a totally valid tactic. They have plastic money, so does the uk

@Joshua79C 4 жыл бұрын

Would be cool if Canada or Australia stamped some old bills as "VOID" and sent them to the Waterjet Channel for use just to test the validity. As they aid US paper fiat currency is made of cotton.