How to Change Oil on 1995 Suzuki King Quad

No video

How to Change Oil on 1995 Suzuki King Quad

Рет қаралды 84,447

11 жыл бұрын

How to Change Oil on 1995 Suzuki King Quad
Please Click The Subscribe Button Below!
Comments and questions are encouraged but please be respectful.
www.tricountylocksmithservice.com
How to Change Oil on 1995 Suzuki King Quad Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media!
Comments and questions are encouraged but please be respectful.
www.tricountylocksmithservice.com
tricountylocksm...
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 2nd amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2014. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. I am not directly affiliated with any of the vendors or manufacturers in this video. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on KZfaq is intended for entertainment purposes only.
Tri County Locksmith Service
1338 Grand Ave
Glenwood Springs
Colorado
81601
970-945-5625 970-963-5625 970-922-5625
Locksmiths United
#LocksmithsUnited
#Locksmithreviews
Locksmith Request
Fast, Friendly, Professional Service.
Locks, Locksmith, Locksmiths,
Lock Repair, Lock Re Key,
Home, Office, Business,
Panic Hardware, Door Closers,
Safes Opened, Safe Repair,
Safe & Vault Service,
Lockouts, 24 Hour Service
Aspen Locksmith, Snowmass Locksmith,
Basalt Locksmith, Carbondale locksmith,
Glenwood Springs Locksmith,
Silt Locksmith, New Castle Locksmith,

Пікірлер: 74

@xcelrejects4413 4 жыл бұрын

Just a FYI the reason you have metal shaving and depris in your filter is because your using the wrong oil you need oil with minerals in it for the wet clutch system and the rear diff all run off the engine oil

@colinbaker7246 9 жыл бұрын

Thanks a bunch for this video! My parents were on my ass about trying to find out how to check the oil and your the only one that had any good info thanks man!

@waynewinton 9 жыл бұрын

No problem

@timjones1878 5 жыл бұрын

really liked your video Wayne,,I got to mention something I caught,,if you look back at your video,, look at the old oil filter,you will see a small o-ring stuck to the filter..that o-ring is on the shaft that your new oil filter slides on to..I guess it's to late to retrive it..and my Clymer manual states with filter change,add 3.8 u.s. qt's 10W40 ATV oil..thanks again Wayne

@waynewinton 9 жыл бұрын

No problem! Subscribe and share!

@darrenar338 8 жыл бұрын

I seen this was older post i just got one of these free last week i never service one of these looking on here found ur video help me find where oil filter was hiding at under yrs & yrs of mud dirt thanks so much 4 post this video save me time only thing i was wondering if u was run car oils i never ever use those atv has wet fibers clutches i is afraid car oil has no necessary additives as cars trucks has transmissions there separate from motor transmission use ATF as atv it shares same oil i torn down few machines i seen lots tar like clogs up on wet flywheels most better part of those small windows like cut out in center cases windows not open mite not allow proper oil flow to enter each outer sides of the motor i mite worry way to much i only use atv oil since these operate hotter and turns at much higher RPM'S holds less oil capacity then a car/truck i worry these car oils breaks down much faster since there same cost i just feel better using there oil i buy by gal save $ Honda/Suzuki/Yamaha 10w30 winter months / 20w40 summer months well thanks 4 help thats good clean looking atv u has mine far from urs looks new compare to mine .

@waynewinton 8 жыл бұрын

nothing wrong with using name brand company specific ATV oil. I pretty only use mine for plowing snow so I just need it to start in the cold. thus the 0-40 rating

@jlgoins64 8 жыл бұрын

maybe you could do a simple video on adjusting the brakes on the 300 King Quad.

@adamcuttler9665 7 жыл бұрын

Thank you for the video. I just picked up a 2001 king quad.

@wayneflint5374 9 жыл бұрын

Thanks wayne! was given a freebie and couldnt figure out where and how to cange and check oil! nice video!

@waynewinton 9 жыл бұрын

Thx

@NollNollOne 5 жыл бұрын

I use 10w40 motorcykle oil.

@mo-reesespieces9066 10 жыл бұрын

Great video. I do believe you got the numbers backward on the viscosity of the oil. The 40 would be your cold weight of the oil. That is why you have 30 weight/40 weight, etc. your 0w/5w would be your warm/thinner oil weight. I used to run 40 weight oil in my car until I read this 35 page report about oil. This guy raced Lamborghini cars and was obsessed about oil and in his report talked about motor damage and why more damage was done to the motor at cold start up. Oil has to get thinner for the motor to run its best. The thinker the oil, the longer it takes to thin out for the motor to run smoothly. My 96 quad runner is air cooled so thinker oil may benefit on the hot summer days but not sure if that would make a difference or not. Peace, Mo

@waynewinton 10 жыл бұрын

Well first thank you for the comment. However It was to in mechanic trade school that I learned the beginning number was the cold weight and the second number was the running weight. Oil needs to operate over a large tempature range to work in the modern day combustion engine. So according to me and what I know the 0 would be the start weight and 40 would be the running weight. The cold weather is the reason that these oils exist beacuse regular single weight oil would be not operate in cold conditions as it would be to thick. Show me an credible article or link where I am mistaken here and I will be glad to learn something new.

@mo-reesespieces9066 10 жыл бұрын

I learned the same thing in auto shop. I will see if I can find the article. I may have to send it in email. I will send you a note when I find it. Peace

@michaelcyr8215 Жыл бұрын

lower oil weights for lower temperatures. A 10w-40 is good for cold weather (10) through hot weather (40). 0w oil is for very very cold weather. Here in Maine where winter starts for cars could be 20 below zero F require a 5w or 0w. It doesn't get all too hot here so 30w is good. Hence 5w-30. Newer engines also use thinner oils (0w) to reduce lost energy pushing around thick oil. They are engineered to work with the thinner oils without experiencing extra wear between metal parts.

@elsucko6597 8 жыл бұрын

Thanks man, have 87 LT 250 4x4. Couldn't figure out where the oil fill was.

@waynewinton 8 жыл бұрын

+Walter Kamora good to here!

@robinnyberg1782 7 жыл бұрын

same thing basically on a 1999 king quad but you need a funnel and a hose to fill the oil since the space is to tight to get the oil can in there.

@davidneil1452 7 жыл бұрын

Iff you look next to the site grass it says 3,200 cc thats 3.2 litres of oil, save you keep looking

@chrishorst6993 6 жыл бұрын

Sorry not one to nit pic, But that is 0 (zero) - 40 weight not O which is a letter not number. Enjoyed your video

@tomashton7208 10 жыл бұрын

some synthectics will make the clutch discs slip, plus you missed the oil drainplug with the screen in it, my 250 has two filters, what your seeing in the filter might be the metal tube in the middle

@waynewinton 10 жыл бұрын

I have had no issues with this oil slipping and I run a snow plow all winter long, infact its the only oil that will let me start the quad in -20 degrees on the first try. If W5-20 is in the engine it takes sevral minutes to start. This is the only filter I was informed about by the dealership.

@tomashton7208 10 жыл бұрын

Wayne Winton the 250 has a screen filter on the bottom plus the side cartrige hence it has two drain plugs, as for oil if the dealer say its okay your good to go, Im just pointing out some oils are not good for wet clutch systems, by the way I ride around when its 20 degrees and using 5-20 castrol when its cold as !@#$ wont hurt, but sometimes I have to use the pull start a few times, then hit the starter, 3 and 1/qts of oil in a 15 cubic inch motor takes a while to warm up too when its cold.

@waynewinton 10 жыл бұрын

tom ashton Ok good info, Keep on riding and do what works for you. Also the temp here is minus -20 degrees or twenty below zero, not just 20 degrees big differance. With 0-40 she starts up every time on time with one push on the button. With anything els she won't hardly run.

@biz4twobiz463 6 жыл бұрын

Hi. Fantastic video on oil change for older King Quad. However, I think you are using the wrong oil for the atv?? the reason you don't use regular oil is, , it tends to build a film on the clutches that ruins them. its a proven fact NON wet clutch approved oils can ruin a clutch. The oil used must meet ATV clutch standards in the specs.

@marshalldamon546 3 жыл бұрын

i know it is kinda randomly asking but does anyone know of a good place to stream newly released series online ?

@kristianguillermo2795 3 жыл бұрын

@Marshall Damon I would suggest Flixzone. Just google for it :)

@dukeatlas5415 3 жыл бұрын

@Marshall Damon I watch on Flixzone. Just search on google for it =)

@diegocalvin1571 3 жыл бұрын

@Kristian Guillermo Definitely, I've been watching on FlixZone for since march myself :)

@ishaanayden2187 3 жыл бұрын

@Kristian Guillermo definitely, been using Flixzone for since april myself =)

@rafthirty2813 5 жыл бұрын

Wayne Winton maybe you know more then me but i don’t think it calls for 0-40. Isn’t it 10-40? I’ve got an 02 which is pretty much the exact same machine. Also u can’t use synthetic with out Makin the clutch slip and possibly damage! I do know that cause if I could, i would definitely use synthetic. Also your old oil looked way too clean to change!! How many miles or hrs do you go between changes? With vehicles ie cars/trucks, you can go 10,000 miles between changing that brand of synthetic.

@brianlee580 8 жыл бұрын

On average how many miles do you go until your next oil change? I used this video last night and was a huge help

@waynewinton 8 жыл бұрын

whenever it looks black in the site GLASS. 250-500 miles

@brianlee580 8 жыл бұрын

Ok thank you

@dw4940 4 жыл бұрын

@@waynewinton you're changing it waayyy too frequently plus.polluting the environment. And you're using the WRONG type of oil. Your gonna disintegrate your clutches! AND TEACHING OTHERS THE WRONG WAY TO CHANGE OIL!

@hoytmiddleton9071 5 жыл бұрын

how do i change the diff oil on my 99 suzuki quadrunner 250 sir

@tomashton7208 10 жыл бұрын

I looked at the shot of your drain plug, the round plate with the three bolts are hard to see because you need to grind of more of the safety plate, any how behind that plate is the screen filter, all you do is remove and clean it with a new O-ring. Whats going on is the adapter plate that holds the snow plow covers up part of the oil screen cover at least thats how my machine was set up. I bought my machine used and it had a ton of leaks the crankcase seal (three dollar part) behind the pull start was broken, the crankcase vent hose was squished shut, and made the engine smoke etc, I had to replace all the axle seals, which cost me around 30 bucks and a half days labor(mine) my compression is 190

@waynewinton 10 жыл бұрын

All good info thanks!

@tomashton7208 10 жыл бұрын

The oil to not use is moly or graphite, the 300 280 and 250 are the same engine case, if you look closely at your drain plug, there will three ten millimeter bolts that go around the center drain plug, thats the cover for the oil screen, just like old air cooled VW,s, the screen is held in place by two bolts, the cover goes back on with the mark pointing towards , the front. You can go to the Suzuki ATV web site and they have diagrams of what im talking about. As for cold weather, I store my machine out doors and cover the hand controls with plastic bags, some times you have to use a hair dryer on the ignition switch, oh yeah the center bolt on the side oil filter is the oil presssure test bolt hole,, to check to see if your pump is working, remove the bolt, remove the spark plug so the engine will spin fast, and it wilL squirt out, when you crank the engine be sure to ground the plug wire, I grew up working on foreign cars that were made back in the 70,s so I may be a little old school about some stuff, for instance I check my valve lash when the motor is stinking hot, The other reason the engine is set back in the frame is because, the open space is needed for the optional electric cooling fan, that sits in front of the cylinder head

@waynehastings4944 6 жыл бұрын

wrong oil

@rafthirty2813 5 жыл бұрын

tom ashton that’s good to know about the optional cooling can. I definitely want one of those! Think i could add it on fairly easily? Mines an 02 which is same machine pretty much.

@BURIALGROUND 3 жыл бұрын

Ive Been trying to get this exact atv running. I noticed only 1 bolt on the oil filter cap and the other 2 were screws. One of the holes is stripped. Not sure if I should tap it, or if there's a way to feed a new bolt through from the inside?

@jonanthony6078 3 жыл бұрын

Is it the same as quadrunner 250

@camkurer5933 10 жыл бұрын

What do you use to take the spilled oil off your concrete driveway?

@waynewinton 10 жыл бұрын

Quickly apply oil soak or kitty litter, then scrub with dish soap and citrus hand cleaner. Rinse with hose or pressure washer. This only woks for just spilled oil it will not work on old set in oil spots.

@kcameron273 4 жыл бұрын

Muriatic Acid should get it off.

@mylostwife5230 8 жыл бұрын

Will this work for a 1999 Suzuki quad runner?

@waynewinton 8 жыл бұрын

I don't know how different they are.

@brucekosnik1625 8 жыл бұрын

should explain why it uses so much oil,because your lubing axle also.

@Nvious6699 10 жыл бұрын

Hey Wayne, May I ask you a few questions? I bought my KQ 4 yrs ago and still know very little about it. I've retrieved a motor ID number to have the dealer checked and see what yr it was made but they said that number was useless and told me that I should look for a VIN number. I have replaced a differential fluid with 75-90 Gears oil (idk if that is what it called for). Where is a drain for Rear differential, if any? Hope to hear from you soon. Thanks

@waynewinton 10 жыл бұрын

I am pretty sure that the rear diff, transmition and motor all run off the same oil.

@YOUNGPHATSONE818 9 жыл бұрын

Does the engine oil and gear oil share or is that sepraete ?bcz when I shift my gears up they shift good but when I shift down my 1st gear gets stuck so I have to mess with its go go back to first gear ? Help plz !!!!

@waynewinton 9 жыл бұрын

Yes gear oil and engin oil is the same. As far as shifting goes you will need to talk to someone who works on transmitions.

@waynewinton 7 жыл бұрын

I'm no mechanic. I have know idea

@pbiele68 6 жыл бұрын

Probably a cable adjustment

@mackensiedunmyre6325 4 жыл бұрын

Please help I literally did the exact same thing and the damn oil is leaking out the front looks like the radiator is leaking it out. It doesn’t make any sense. So I leaked the oil out to see if it was in the engine and there was none in it. How could it of gone all the way to the front to the radiator?

@Polarismod1 4 жыл бұрын

Mackensie Dunmyre it’s an oil cooler in the front

@joshuam7957 5 жыл бұрын

How many quarts of oil does it require?

@dw4940 4 жыл бұрын

I think 3.7L with filter change. 3.6L if you dont change filter. Dont follow this moron.

@klc3500hd4x4 5 жыл бұрын

Big hole in or out

@AsTheWheelsTurn 9 жыл бұрын

I am confused. I have the same bike and that is NOT where you drain the oil from. I see you have cut away the skid plate to access this drain but there is a drain plug that is accessible without taking off any skid plates . why are you draining from here? this has me baffled. I took mine apart and i have the same drain as this that you show on the video but why use that one when there is one easily accessible?

@waynewinton 9 жыл бұрын

That is just the one I chose to use. I did not see any eiser one to use.

@AsTheWheelsTurn 9 жыл бұрын

ok just checkin. maybe my 93 is slightly different than the 95. i have the same drain you are using under the skid plate but there is one also a little further back that can be accessed thru the skid plate without removing it or cutting anything out., smaller bolt also. thanks or the video you did a nice job on it.

@waynewinton 9 жыл бұрын

AsTheWheelsTurn cool thanks!

@benbarker8145 6 жыл бұрын

Just changed mine 92 from the smaller bolt I have no idea why there's two places to drain from either and notice the dealership or someone has cut out the bigger one

@rafthirty2813 5 жыл бұрын

Ben Barker on mine(02’), I drained it from the filter. Didn know there was a bottom drain, duh! Got it used of course.

@kirksachs 4 жыл бұрын

That's not actually the proper way to drain the oil in one of these.... I mean yeah it works, but telling people they need to take the skid plate off or cut it is silly... The correct oil drain plug is furtherback close to center near the rear axle. You don't have to remove the skid plate it has a built-in hole for the drain....

@mycoolwill7594 4 жыл бұрын

That's just what I was looking at. They have a nice drain plug there, easily accessible. Wrong drain, wrong oil, no new O-rings on filter and housing. Maybe you should redo this video.