Just picked one up yesterday. Po said it was due for a change. Havent owned my own quad before. This video definitely helped me out

Thank you so much from New Zealand

Hey great job! All of your Suzuki quad videos have been very helpful to me. Straight forward explanations and good camera work. Thanks for all your efforts!

Nice, clear, straightforward video, and as others have said, the tip on the oil spec was really useful, cheers!

I'll probably keep watching your King Quad videos so that I can learn how to keep mine going! Thanks for making them. Hope you get to a carb rebuild someday...mine won't idle off a slight choke...been like that for years, especially in the cold.

Very handy to be able to watch these videos before I do these jobs. I am a mechanic, but not worked on quads before. Very helpful. Thank you

Very good videos. I just bought my son a 1999 King Quad 300. It runs great, just has no brakes. I have ordered a new drum and shoes for the back. The previous owner completely removed the front brakes cause they would constantly freeze up on him in winter. He stated they were notorious for this. I think we will be fine with just back ones for now. I have going to fix them, change oil and spark plug. Thanks again for all the great videos.

Thanks! Didn't know any of that! 😂Ok, did it. Ended up using 15-40 because that's what the store had at the time. Figure I'll change it again before winter. Getting the level right was the issue I ran into. When I filled to what looked like the right level, after running it for 15 miles, it was low. Then after putting what seemed to be the right amount to get it to the right level, it was high. Only have 10 miles since though so will check again after 5 more.

Most helpful videos I have seen. Thanks for taking your time and giving such clear information.

Pound for Pound this is the BEST machine on the market...I dumped my old oil after seeing this and used Jaco branded oil

Great video and also the top end rebuild one! My Head Gasket started leaking oil and it is nice to see exactly what I need to disassemble rather than just guessing about what I should do. Mine has almost 4000 miles on it and still running great. I also have a Yamaha Grizzly 660, but the King Quad is my goto machine!

Dont want to sound like a smart ass but always loosen the fill plug first just in case you can not un do it because once the oil is out and you can not re fill you are inthe SH....t. Good up load well done !!

Hey: Thank you very much; very helpful. I have two machines, and it's been a while since I changed the oil so you provided an excellent refresher course. Thank you for the video!

Very clear and informative! Thanks for posting this.

These are AWESOME tough as nails machines...Love the information on the oil you recommend

I’m so glad I found your videos. I can’t wait to start working on mine. I came to me in pieces. Well that’s how I bought it lol

Thanks for making video. The owners manual is MIA. Like comment on jso-- really important. Have had clutches slip due to wrong.

Thank you for all your videos they have helped me a lot . I have a 98 king quad 300 and it's in a mess

Thanks for the info. I just acquired one of these and its in great shape but I want to make sure all the fluids are new and ready to run

Would not have found the filter without your vidio, thanks.

Thanks for the great videos Schneids15. Very helpful and it’s nice that you’re Canadian, like the Royal Distributing reference.

First time doing oil change, very helpful!

I have 3 of these machines! A blue 95 like yours, a green 99, and just picked up a red 2001.

The K&N 132 oil filter is a cross reference

The fuel petcock is vacuum operated. It can leak through and fill the crankcase up causing oil dilution. I bought a new OEM petcock and it was worth it. chuck

great job man! thanks for all those détails !

Thank you my man, so useful 🙌

I am on the tail end of an engine swap on one of these quads, I bought 2 for 250 bucks and one had a blown motor if you need any parts I have a ton of spares

Great vid mate!

Thank you so much. I just bought an old one.

This is awesome, thank you so much! Could you do a video walking me through changing the fluid on the front diff?

Great Vid. Seems my 1992 300 manual calls for some sealant on the oil filter housing. Hope it is just an O ring like yours.

thanks bud,weird little bike,I couldn't find fill location....new owner

Thank you ! Very good information

very helpful thanks!!

excellent video...again.

La hauteur des poignées de la handlebar. Thank you

thank you

nice video thanks . just started working on king quad. how many quarts of oil does it hold...

Yeah I got a 2001 Suzuki 300 King quad 4*4 it's got 200 miles selling for 2500

Thanks lot. I made a big mistake, I add too much oil in it.

I just bought one of these old classics!..how many litres of oil does it hold?…I will be using 5w40 T6 as well

Hi Josh , did my oil change , I noticed the filter does not fit as snuggly or squally on the spigot as I expected. I guess the spring pushes it all in place when the cover is replaced. Suzuki could have done a better job with this ?

Help needed, I have a 1999 300 king quad, starts perfect and idols great but as soon as I give it throttle, it sputters and backfires and when I put it in gear there is no power, it just sputters....any ideas?

Be aware there is a small O ring that goes on ahead of the oil filter, without it the oil will bypass the filter, otherwise good video thanks.

Any pointers on how to remove the main rear drive shaft on a 2005 Suzuki King Quad 700? The rear diff has already been loosened and is free from the frame. I need to slide the shaft out ,(to the left), to slide the new drive gear onto the front of the shaft inside the case

Good video but how much oil did you actually end up using?

Does the 300 king quad have a low oil shutoff 2001 yr

It was an 11/16 on my 95

I see from the parts diagram that there is an oil screen on the bottom of the engine. Do you ever remove that screen and clean it?

Any chance you can do a video on changing the lights to LED on a King Quad??

Hey how do I know the year of my quad I can't seem to find it.... thanks

My oil plug is a 14mm

Awesome

Hi, great vid, do you have video on how to change front diff oil? thanks

How about adjusting the clutch bud I'd really appreciate it thanks. Kevin

Can you show a video of replacing a oil temp sensor on 300 king quad Thanks in advance

I have a 95 Suzuki king quad 300 and I’m getting gas in the oil. My compression is at 110 psi. Would the piston rings be to blame for gas in the oil? Also it smokes bad. I’m currently doing a carb rebuild/cleaning.

Changed the oil and accidentally removed the rear diff cover instead of the filter. Do I need to add oil into the diff or will that use the engine oil and circulate into the diff ?

Eh salut. Can you make a video on how to afjust the handlebar on a kingquad 300.

Should you drain your cooler and lines?

When you change the air filter on a 1997 Suzuki king quad should there be a lot of oil in the casing with it and should you change the oil in there and what kind and grade. Thanks Garde

Hey bud doe the old quads use rear end dope? Is so were do you change it??

Damn, Bro. You have to have a license plate up there in Canada?

What should be an easy job is turning into a real problem as some damm fool has stripped the threads on the bolts holding on the skid plate underneath mine and I can't get to them easily (there is no hole in my skid plate for the drain plug) - I have to figure a way out of getting the machine up above me so I can work on it properly and then sort out the mess they have left for me.

Nice video Josh and I appreciate your help on changing the oil on the atv. I have a 1993, so how much oil does the atv take in quarts? I understand about looking at the hour glass but is there a standard amount to start with?

Would you be able to show me the color wires that go to the cdi box

Hello .i have a question to ask u ? What does it mean when the oil temp red light comes on ?

+ clean your oil strainer

68

17 mm not 18mm

69

67