when i was a kid I would fix our hoover when it needed it, once every couple of years it would throw that rubber drive belt, and once I replaced the impeller because it sucked up a coin or something and broke it... completely simple, just a screwdriver and less than 5 minutes by a teenager... parts cost pennies and were in every hardware store in town...

Thanks! Yes they can be bastards, what went wrong with yours?

It's probably more annoying than a problem, it's just there to diffuse the exhaust air and slow it down as it exits the machine. Cheap on ebay (usually with an spare housing) or coarse thin sheet aquarium filter would work (or leave it removed... 😂)

@@beko1987 OK, thanks…! I’ll just leave it alone for now, and see how it goes…. thanks…!

I use ebay, but the last time I needed to buy one it was hard to do and took ages for one to show up... Makes me fear for their future 😥

I've got one, bought it in 2019 for $800 AUD. It doesn't have much suction because you have to use it on the medium power setting to get usable battery life out of it (~15 minutes). It makes up for the lack of suction by using the motorhead brushes to lift the dirt and dust. So instead of using suction to clean, it uses the rotating brushes. The suction is just to move the dust up the pipe and into the canister so it has somewhere to go. It cleans fine, well even. I have carpet and tile and use a different motorhead for each, and they work fine and good. However there are myriad issues that would prevent me from recommending it, I could write a wall of text but can't be bothered. To sum it up though, reliability issues with battery & motorheads, filters getting smelly. Can't point the unit upwards otherwise dust backflows and filter gets instacaked with thick layer of dust. Needs deep clean every few months with a 2nd vacuum cleaner to get the dust out of these thin channels where it all builds up. To finish on a positive though, I do like the convenience of it, and it doesn't stink up the room after using it. In the video he says he soaks the filter in soapy water and scrubs it, and I'm pretty sure that would damage the filter fibers and no longer be HEPA certified, thus stinking up the room after use.

@@Animal_lives_matter I just bought a V8 recently. They're on eBay and I got a good price but it seems Dyson are playing around with the pricing with various sales at different rates to generate sales. Anyway, it's amazing the amount of dust it pulls up but, like you say, it's the motorhead that's doing that. The suction is still very strong but not sure how long that will last. The dust canisters are very small. About a quarter the size of the Dyson Ball I had previously and the Sansui I still have. But the Sansui is getting weak suction now and I can't find filters for it. I've opened up the motorhead twice now and each time there was dust inside it. Not sure where it is getting in but cleaning it is a problem. For the battery, it takes too long to charge and doesn't last very long. Been looking at battery replacements on eBay for Ozito batteries. I have a few 4Ah batteries and they charge quickly. The adapters are a bit pricey but I'll see. Overall, I think they are over-engineered and badly designed. Noticed this with the Dyson Ball. Complicated to take apart or assemble. The Sansui is a lot easier. Can take the whole dust canister apart with just some hand force. Simpler to remove and install it back too. Unfortunately, it's corded and the cord is very short. Plus it overheats on thick carpets.

Cleans OK. My V8 anyway. Wasn't impressed with the Dyson Ball. They are badly designed, though. Overly complicated to open the dust canister.

@@gary_rumain_you_peons Yeah the V8 is better value than the V10, and I think I could see myself possibly endorsing the V8 when it's on sale for a discount. The V10 isn't that much better other than having a bigger bin but honestly it's still pretty small and leaving dust in it during storage makes the filter smell so I want to empty it after every use anyway. Another annoying thing is when you get down to 1 bar of battery life you don't know how long that 1 bar is going to last whereas on the next model they added a numeric timer so you could see exactly how many seconds you had left and whether that gives you enough time to clean the next room - having it cut out half way through a room is annoying.

@@Animal_lives_matter Yes, those are good points. I got mine for $425. It was reduced to $450 but eBay had a promo code that took another $25 off the price. Currently, they're $499 (reduced from $799). And if you're with eBay+ (I'm not, I think it's a scam) you can get it with another $124 off. So that's below $400. Not bad. But I'm not too impressed with it. Like I said elsewhere, they're over-engineered and poorly designed. I can see lots of things potentially breaking. Some of the connections already feel loose. The friction-fit style of connections don't appear to have that problem. I've kept the wand and one of the brushes from an old Nilfisk vac. They fit perfectly with the Sansui I've got and still work great. BTW, do you know if you can get adapters for them to fit the Dyson connections? I would love to use the Nilfisk dust brush over the silly Dyson one. I looked on eBay but didn't find anything that might work.

I am reaching this conclusion as well. I’m a huge shop vac guy. I can some of the most powerful shop vacs for 1/4 of the price of one of these.

It's not a giant drill, it's a small 12v one that has lovely low torque settings 👌 When I have to get the 40v imapct out to crack stuck screws and bolts I know it'll be a fun* refurb 😂