We Are LUCKY - This Was Ready to Come Apart NOT GOOD...

No video

We Are LUCKY - This Was Ready to Come Apart NOT GOOD...

Рет қаралды 3,249

Күн бұрын

Once again finding these little gremlins in my car's race program to keep our car running top shape and keep us safe... NEVER seen this before?
TEE SHIRTS: neomustangs.co...
#ford #mustang #foxbody #budget #axle #rebuild #fabrication #junkyard #explorer #rearaxle #cheap #mods #diy #howto #racing #maintenance #yearly
SUPPORT THE CHANNEL: Click the JOIN Button for MEMBERSHIP!
/ @neomustangs
SMASH LIKE, SUBSCRIBE AND BELL FOR NEW VIDEOS!
[CONTACTS]
INSTAGRAM: / neomustangs
TWITTER: / neomustangs
FACEBOOK PAGE: / neomustangs
EMAIL: NEOMUSTANGS@HOTMAIL.COM

Пікірлер: 34

@strassafrass1 Ай бұрын

I think we share a playlist in the universe. Skid row and Airwolf? C'mon! Leggo!

@Neomustangs Ай бұрын

Hell ya!

@vancecooper9943 Ай бұрын

Neo, look into “super shim” kits. They have an inside and outside that fits the housing properly, then there are thin shims in the middle to take up needed thickness. “Adjustable shims” basically

@Neomustangs Ай бұрын

Thanks i sure will!

@michaellafreniere5083 Ай бұрын

Why ain't no one liking vids, come on folks give neo some love!

@user-hg8ft5tr7u Ай бұрын

ahaha. thanks for reminding me why i gave up racing a long time ago. at some point, its not fun anymore. i have long passed that threshold. idk if i even gaf about my newedge anymore. i dont wanna do this on my time off from work. your killin it, keep at it man. im just gettin old. it happens.

@Neomustangs Ай бұрын

I get it for sure!

@Jim_Lawrence Ай бұрын

After breaking a few things back when I raced motocross, riding 50s seemed like a good compromise 😂

@NotchFox Ай бұрын

I'm getting older too. Finding it harder and harder to make myself dive into maintaince. Still love to drive and reminisce about "glory days"! The necessary grunt work is difficult to face!

@TheEpmd40 Ай бұрын

Always my favorite content to watch! Because of you I am starting to gravitate to the idea to race my vert in the future. It's been about 30 years racing at Englishtown which is no longer but Orlando and Bradenton aren't too far from me now. You're a bad influence Dan!🤣🤣🤣

@Neomustangs Ай бұрын

Just do what you can afford and love to do. At some points in racing its just too much

@vrm86gt Ай бұрын

seems the axle housing flex just enough for a few of those small shims to wiggle out over time! Good catch and lesson learned, probably good idea to find a thicker shim than to stack thin ones.

@Neomustangs Ай бұрын

Ya I don’t know why there was even that shim in there. Didn’t think would be a problem

@joegaskill8742 Ай бұрын

Fought like a switch blade so no one could bring him down.. killer cover man,,sounds real good!

@wayneselman9481 Ай бұрын

Yo Neo. I'm finally of the jack stands up and running drove her to a local car show dirty and rough looking but I was happy as a pig in s@#%t. I was going to ask about the blue trans fluid from a previous video you but you answered it here. Thanks dude for the kick in the a$$.

@Neomustangs Ай бұрын

Hell ya man glad i could help!

@Jim_Lawrence Ай бұрын

@Neomustangs Smurf piss I believe is the technical name...

@jimhilt1652 Ай бұрын

Good deal…. Thanks again

@Neomustangs Ай бұрын

Thx for watching

@Dynodon64 Ай бұрын

I had the same problem with the shim packs. Went back to 1 piece per side.

@jcnpresser Ай бұрын

I think the kit from Yukon gear has pretty good side shims, they have a step in the center that the thin shins can’t come out of. Pretty sure that’s where I got mine, not positive though. I do prefer to use the factory stuff when ever possible though, much easier to do.

@raymondleathers5921 Ай бұрын

Get some motive ss12 shims. They have two half’s with a step the small shim sit in and this can’t happen. The reason it happens is bearing wear and then they become loose and can walk. Also I’ve had bearing failure with that fluid. Not a fan. I like the idea of it but it gave me problems twice and I was done with that.

@blownfox Ай бұрын

At least nothing was broken when my rear end started making some noise some how I folded the spider gears over on a explorer carrier 🤦‍♂️ I ended up with a true track so no more spider gear problems 😂

@paulhudgins5120 Ай бұрын

Glad you found a problem, these diffs take a beating, especially the torque your getting out of motors, they are one of the weakest parts.

@Neomustangs Ай бұрын

100%. I knew this needed maintenance.. i had extra parts waiting just in case.

@richlong4119 Ай бұрын

Get your car off the jack stands. 😊

@jimhilt1652 Ай бұрын

Hmmmm. Count down in 30

@thomsoncarter3121 Ай бұрын

What was your backlash before teardown? What backlash and preload are you shooting for for your application? I shoot for .010-.012" on stock application. Great video.

@Neomustangs Ай бұрын

8-10

@A1cashumout Ай бұрын

You still going to do something with the coyote motor

@jimhilt1652 Ай бұрын

@asmith8904 Ай бұрын

Neo-love your channel man.. What do you use for fuel pump..im in the 800ish at the wheels but want a better pump..running a 340lph right now but seems right at the limit?

@Neomustangs Ай бұрын

340 even wired up would be rough to be even close to 800. You must be on gas not e85.