We Bashed Our Switch Against A Dock So You Don't Have To

We Bashed Our Switch Against A Dock So You Don't Have To | PolyTech Hull Meets Oyster Shells

Рет қаралды 33,554

Жыл бұрын

Witness for yourself what happens when a brand new Sea-Doo Switch is slammed against a dock with oyster shells clinging to the pilings. And, discover how to protect your Switch from scratches like these or how to make them disappear.
Order Reef Wrap here:
jetboatpilot.com/products/ree...
Protect Your SeaDoo Switch in Style | More Color Options for SeaDoo Switch
• Protect Your SeaDoo Sw...
Order Impact Graphics Here
jetboatpilot.com/products/imp...
Music from freetousemusic.com
Shine by LiQWYD
• 🍾 Party No Copyright U...

Пікірлер: 53

@sea-dooswitchlife2095 Жыл бұрын

As a Switch owner in Florida this has been my biggest fear docking up. My wife and I are very meticulous with our boat and are devastated when this happened to us. I love this!!!

@jaskdavis Жыл бұрын

Awesome video! Definitely a good protective upgrade 👌

@yojohnny5 Жыл бұрын

Awesome. You are making some nice stuff for these things. If they would put the 230 in the 13 footer, I'd already own it. They need to make a faster more powerful version of these things. They can handle the power.

@richardcruickshank1046 5 күн бұрын

well done very informative !

@alcarriere2365 Жыл бұрын

Awesome stuff!

@HAL-zh1kf Жыл бұрын

You make incredible products for the Switch!

@JetBoatPilot Жыл бұрын

Thank you!

@dougbixler7577 10 ай бұрын

Don't forget a heat gun/hairdry for that back curve over and even everything else with a rubber roller to help get that sticky tape nice and grippy.

@jaybdvm Жыл бұрын

GREAT product!

@JetBoatPilot Жыл бұрын

Thank you!

@terrywalters1037 Жыл бұрын

Awesome job

@JetBoatPilot Жыл бұрын

Thank you!!

@k.williamelliott7969 Жыл бұрын

Tank you for the video. Interested in learning where you bought the boat registration lettering?

@JetBoatPilot Жыл бұрын

We make them. Check out 3DNumbers.Net

@chrisspeer3850 Жыл бұрын

Will, great video at you boats expense! Any downside to this? Performance? Guessing the 1/8” gap you mention still allows for water intrusion when the boat is in the water and not moving forward?

@JetBoatPilot Жыл бұрын

Yes correct. No observed downsides.

@Anon-ft1yb Жыл бұрын

What’s the cost for a full Simple black kit?

@newbie_nugs Жыл бұрын

Sweet! So definitely before I put in water I will have bumper and reef wrap. But do you plan on having the 2023 switch sizes or just the 2022 size? Looking at the 18' cruise . But also found a 2022 model 16' for about 7k cheaper so still a toss up

@JetBoatPilot Жыл бұрын

They're universal fit, all years all models.

@newbie_nugs Жыл бұрын

@JetBoatPilot thank you So for the 18' model would I select the 16' reef wrap?

@JetBoatPilot Жыл бұрын

@@newbie_nugs I think the drop down selection says 16'-18'

@massimilianozappia4388 Жыл бұрын

Hey Will i Love you Videos Maybe if is possible could you make a video how to install a minnkota trolling motor or a Minnkota talon

@JetBoatPilot Жыл бұрын

We don't have a motor to mount to the Switch. Could be done but not likely soon unfortunately. Thanks for the comment though!

@massimilianozappia4388 Жыл бұрын

@@JetBoatPilot i think you guys should ask minnkota to work together I am pretty sure there are a lot off Seadoo switch owner who are interested in mounting a trolling motor. Thank you for replaying

@JetBoatPilot Жыл бұрын

@massimiliano zappia we don't have a contact with them but would try if we had an in road

@jon-4345 Жыл бұрын

How is it on added drag to the boat?

@JetBoatPilot Жыл бұрын

No real impact as 90% is out of the water on plane.

@grzegorzbielski28 Ай бұрын

Hello. Is there any product to replace the clear view side panels for something more durable?

@JetBoatPilot Ай бұрын

None that I am aware of.

@estherlilliam1 Жыл бұрын

Cuanto valen

@joelbouchard5854 9 ай бұрын

Where did you get those registration letters and numbers?

@JetBoatPilot 9 ай бұрын

3dnumbers.net

@malbadri87 Жыл бұрын

What is the estimated time to install on 21 feet? Let us say we decide to remove it later will it damage the boat? One final 😃, can someone purchase replacement parts?

@JetBoatPilot Жыл бұрын

Install about an hour and it is easy to remove if you want to you can also buy individual Parts if you damage one

@shottown911 17 күн бұрын

Will the reef wrap slow to speed of the boat

@JetBoatPilot 17 күн бұрын

It will not impact top speed. Will not be in the water at plane speeds.

@CaptainLeonsBoatingandMore Жыл бұрын

Will, is the 3D Reg. letters on that switch the 20 inch or 30 inch size?

@JetBoatPilot Жыл бұрын

I think that is the 20 inch (pwc size)

@CaptainLeonsBoatingandMore Жыл бұрын

@@JetBoatPilot gotcha thanks. My recently purchased set is 33 inches, and before it goes on in the Spring, I’m questioning if the smaller set is more appropriate for my 19ft Yamaha.

@JetBoatPilot Жыл бұрын

@Captain Leon's Boating and More if you need us to exchange them we can

@ajyoung73 Жыл бұрын

Is it fade resistant? Thinking of using it in AZ. Black surface on my Switch is starting to fade

@JetBoatPilot Жыл бұрын

I know that it is UV stable. Given that it will be installed on a vertical surface it is unlikely that it will fade.

@skidudek2 Жыл бұрын

Where's the impact graphics video?

@JetBoatPilot Жыл бұрын

We are in the process of editing that video as we speak

@massimilianozappia4388 Жыл бұрын

On a Seadoo switch

@informative_walrus Жыл бұрын

nice product, shame the boat is not better protected from the factory. It's a real limiting factor for these boats at this price point. This wrap is basically required, even for fresh water.

@JetBoatPilot Жыл бұрын

Yes I think they need to make it wider at the rails then at the pontoons

@johnellenburg2297 Жыл бұрын

Should come installed from the factory

@guillermomaguire5394 11 ай бұрын

Kind of jumps out at you, doesn't it. Of course it should be installed at the factory. and be nice to see 13' with 230 hp

@TJ-hd5ym Жыл бұрын

I wonder if would turn to that ugly gray with the sun.

@Nobodyspecial5150 Жыл бұрын

Made me cringe with each crunch😢

@autobureau Жыл бұрын

a lot of work for it to just get scuffed up again on same, call me old fashioned, but a million years ago they invented fenders for a reason? also , its polytec ,,.. so can be heated up and refinished ? I can't see them lasting myself ...sorry dude

@JetBoatPilot Жыл бұрын

The end result is that the surface is much tougher and when it does get scuffed hard it does not show. We tried to show on camera that there were marks so as not to mislead, but truthfully, to my eye I could not see them easily. Also these panels are $899 each to replace. The average user is not going to have the skills to repair. This kit makes it easy for anyone to make the boat look new once damaged and prevent it from getting badly scratched again.